Loading ...
Loading ...
Loading ...
Figure 2-45 Fit the Camera
7. Turn the camera clockwise until it snaps into the gang
box.
Figure 2-46 Snap the Camera into the Gang Box
8. Secure the junction box body on the ceiling with four
PA4 × 25 screws.
Figure 2-47 Secure the Junction Box Body
9. Route the cables through the bottom cable hole or
the side cable hole of the junction box and connect
the cables.
10. Combine the junction box cover with its body.
Figure 2-48 Combine Junction Box Cover with Body
11. Refer to step 7 of 2.4.1 Ceiling Mounting Without
Junction Box to adjust the angle.
2.5.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Φ 10 mm screw holes in the wall where you want
to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
Loading ...
Loading ...
Loading ...