Loading ...
Loading ...
Loading ...
黀
ǩ
!!! WARNING !!!
During a high wind event occupants MUST
stay at least 3” away from the walls and door
and remove all loose items from shelves and
walls by placing them on the floor to avoid
potential injury from debris impact.
!!! WEAR HEARING PROTECTION !!!
20006
17
Swisher Acquisition Inc.
WARNING!! PROPER INSTALLATION & INSPECTION ARE REQUIRED!
This shelter will not meet the requirements of the ICC/NSSA Standard or FEMA
safe room guidelines for storm shelter construction unless properly installed and
inspected by a Qualified Inspector as described below.
This tornado safe room was manufactured by the above-named Producer Member of the
National Storm Shelter Association (NSSA) in accordance with the ICC/NSSA Standard but
was not installed or site-built by the Producer Member
or an NSSA Installer Member.
Correct storm shelter installation and the adequacy of the foundation to which this shelter
is anchored are integral to the successful performance of the shelter under extreme
weather conditions. The Producer Member has provided detailed installation instructions,
including an Installation Checklist and an Inspection Checklist. Installation must be in
strict accordance with these installation instructions.
The owner or the contractor installing the shelter is required to arrange for inspection by a
Qualified Inspector to be conducted upon installation and before enclosing this shelter. A
Qualified Inspector is defined as a local building inspector or the authority having
jurisdiction where the safe room is installed, a registered architect, a professional engineer,
a licensed professional inspector, or a Producer Member’s safe room installer or technical
representative.
The Inspector should complete the Inspection Checklist and promptly return this Checklist
to the Producer Member. Upon receipt of the completed and signed Checklist, the Producer
Member will issue a NSSA Seal Type 4 to affix to the shelter to confirm that the shelter
meets the requirements of the ICC/NSSA Standard. Until receipt of the Inspection Checklist
by the Producer Member, this shelter is to be deemed non-compliant with the ICC/NSSA
Standard.
20007
Part # 20006
Decal - Impact Warning
Part # 20007
Decal - Proper Installation
Loading ...
Loading ...
Loading ...