2
6
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
54
USER’S MANUAL
Shoe&Boot Dryer
EP24216
3
ASSEMBLY:
1.Unfold front base from the rear base,uncoil the power cord inside the
rear base,and expose your wanted length and keep remaining length
coiled inside the rear base.
2.Assemble the two brackets/shoe stretchers by pressing them into each
upper air tubes’ top unl they are in its place stably and firmly.
3.To stretch the upper air tubes for drying long boots by pulling them up
ll them stuck in its place by Shrink&releasetubes buons.
4.To shrink the upper air tubes for easier storage by pressing two sides’
buons and pulling down tubes unl reach the boom.
5.To release the upper air tubes by pressing two sides’ buons and
pulling up tubes unl fully being pulled out.
6.To adjust the brackets’ angles by pressing brackets’ upper parts in up
or down direcon.higher drying efficiency by adjusng to upright
posion aer pung shoe or boots into brackets to allow warm air
easier and faster reach the toe parts of shoe and boots.
OPERATING INSTRUCTIONS:
1.Place dryer on solid ,flat surface.
2.Place footwear onto tubes,making certain there is a minimum of 6-8
inches from the top of the boot to the base of the appliance.
3.Plug the power cord into a standard 120V household electrical outlet
and turn ON the switch buon on the upper base,the power indicator
will be ON,then the unit will begin working.The unit operates silently
and warm air will begin to circulate through the tubes in approximately
10 minutes.
4.Monitor your footwear carefully and remove when dry,do not dry it
connually over 10h each me to avoid overdry,and turn OFF the switch.
IMPORTANT INSTRUCTIONS:
• When using this product or any electrical appliance,basic safety
precauons should always be followed - especially when children are
present.This product is not intend for use for children.
• Do not place “soaked”or “dripping wet” footwear or gloves on the dryer.
• Do not expose the dryer to rain ,spray,or liquids.Do not immerse in
water.Do not use outdoors.
• Never drop or insert any object into any opening of this appliance.Keep
air intake vents clear for proper circulaon.
• Do not use near flammable substances.
• Keep dryer away from other heat sources.
• Do not leave dryer on unaended for log periods of me.
• Do not turn on unit or leave on without footwear in place.
• Do not disassemble unit or aempt to repair.Doing so may void your
warranty and cause damage to the product or may cause personal injury.
• This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electrical shock,this plug is intended to fit in a
polarized outlet only one way.If the plug does not fit fully in the outlet,
reverse the plug.If it sll does not fit,call a qualified electrician.Do not
modify the plug in any way.
• A short power-supply cord is provided to reduce the risks resulng from
becoming entangled in or tripping over a longer cord.
• Extension cords are available and may be used if care is exercised in
their use.
• If an extension cord is used:
1)The marked electrical rang of the extension cord should be at least as
great as the electrical rang of the appliance.
2)The longer cord should be arranged so that it will not drape over the
countertop or tabletop where it can be tripped over,snagged,or pulled
on unintenonally (especially by children).
MAINTENANCE:
WARNING:ALWAYS UNPLUG THE CORD BEFORE MOVING OR
SERVICING.DO NOT IMMERSE HEATER IN WATER!
CLEANING:IMPORTANT!DO NOT IMMERSE DRYER IN WATER!
Clean the dryer grills with the vacuum brush aachment on your vacuum
cleaner.This will remove lint and dirt from the inside of the dryer.
DO NOT ATTEMPET TO TAKE DRYER APART.
Clean the body of the heater with so cloth.
CAUTION:Do not use gasoline,benzine,thinner,harsh cleaner,etc.as they
will damage the dryer.
NEVER USE ALCOHOL OR SOLVENTS.
STORAGE:Store the dryer with these instrucons in th original carton in
a cool,dry place.
EXTRA FUNCTION:
1.Power cord can be coiled under the base and fixed the plug for easier
storage and userfriendly,or you can expose any length of cord out of
the base as per the distance between machine and power socket,and
keep remaining length coiled under the base.
SAVE THESE INSTRUCTIONS!
Adiustable brackets
Brackets
Upper air tube
Shrink&Release tubes buons
Lower air tube
Power indicator&ON/OFF switch
Front base
Fold to storage front base into rear base
Rear Base
Air inlet
SPECIFICATIONS:
120V AC ,60Hz, 36W
MAIN PARTS
