Loading ...
Loading ...
Loading ...
22
PRWB24C32CG Use, Care, and Installation Guide
WINE & BEVERAGE
COOLER
DUAL ZONE
PRESRV™
Operating Your Appliance
Demonstration Mode
In this mode, the compressor and fans never turn on but all other functions remain enabled. When in
Demonstration Mode, the “R” indicator light will slowly blink indicating it is in Demonstration Mode.
To enable or disable Demonstration mode, hold Power Button and tap Decrease Temperature Button
twice.
Temperature Alarm
If the interior temperature is higher than 73ºF (23ºC), “HI” is shown on the temperature control panel
and the temperature alarm will sound continuously after one hour. This indicates that the inner
temperature is too high. If the inner temperature is lower than 28ºF (-2ºC), “LO” is shown on the
temperature display panel and the temperature alarm will sound continuously after 15 minutes. If one
of these situations occur, please reference the troubleshooting section for support.
Defrosting
The wine and beverage cooler is designed with an automatic defrost system. However, on colder
settings, some frost may build up. Additionally, the more humid the ambient conditions, the
more frost may build up. Keep the door closed as much as possible and avoid opening the door
unnecessarily to minimize frost build-up.
If frost is preventing the door from closing properly, you may need to power the unit o until the frost
melts (possibly up to 24 hours). Use a soft absorbent towel to dry the unit.
Child Safety Lock
The wine and beverage cooler has a child safety lock designed to keep wine and beverages within the
cooler out of reach for children. Within the center of the front vent, a keyhole will be visible. To lock
the wine and beverage, insert the provided key into the keyhole and turn the key counterclockwise. To
unlock the wine and beverage, turn the key clockwise.
Never attempt to remove frost with a sharp object.
WARNING
Loading ...
Loading ...
Loading ...