1. INTRODUCTION
BS EN 166/F - Modern wraparound design gives increased protection. Comfortable dual material temples for improved t around the
nose. Polycarbonate anti-scratch clear lens.
Notied Body: 0196 Carried out by:
Type Examination Certicate Number: C6356CH/R0
2. SAFETY
WARNING! Safety glasses with polycarbonate lenses are impact resistant but may break under severe impact.
WARNING! Eye protection worn over standard ophthalmic spectacles may transmit impact, thus creating a hazard to the wearer.
9 Always perform a risk assessment and follow correct health and safety procedures before using this product.
9 Replace pitted, scratched or damaged lenses.
9 In rare circumstances, some people with extremely sensitive skin may suer from allergies causes by the product.
8 DO NOT use tinted or clear lenses when welding or performing other operations which expose your eyes to harmful levels of radiation.
3. APPLICATIONS
3.1. SUITABILITY
When worn tightly to the face, these safety goggles provide excellent protection by preventing:
• Impact hazards from chipping, grinding, machining, masonry work, riveting and sanding.
• Chemical hazards against liquids, acid and chemical handling, degreasing, plating.
NOTE: frequent cleaning due to lens fog may be required in certain conditions.
3.2. OPTICAL CLASS
1 - suitable for work with high vision requirements for permanent use.
3.3. PROTECTION AGAINST HIGH SPEED PARTICLES
F - Low Energy Impact - 45m/s
4. MAINTENANCE
4.1. CLEANING
9 Use a soft cloth and mild soap to clean. Ensure hands are clean (without grease).
8 DO NOT use abrasive materials.
4.2. STORAGE
9 Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust free environment.
9 Use original bag for transportation.
5. OBSOLESCENCE
Like all protective products, the life depends on the type of use, care and maintenance. If your frame is damaged, replace the entire
article. In every case, the product must be replaced after a period of two years.
SAFETY SPECTACLES - CLEAR LENS
MODEL NO: SSP61
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Original Language Version
© Jack Sealey Limited
SSP61 Issue 1 08/08/23
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
REGISTER YOUR
PURCHASE HERE
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
