Smeg STL324BQLH Fully-integrated built-in dishwasher 60 cm

User manual EN - Page 29

For STL324BQLH.

PDF File Manual, 58 pages, Read Online | Download pdf file

STL324BQLH photo
Loading ...
Loading ...
Loading ...
User instructions
29
out a pre-wash cycle, after which the set “cycle delay” option will be
activated.
SELF CLEAN (if present)
Dishwasher cleaning cycle. The cycle should be started with the machine
empty, without dishes. It is recommended to run the program every 2-3
months, using special dishwasher detergents. The light flashes during
operation. At the end of the cycle it remains on and cycle lights 4 and 5
flash.
The display (if available) shows “End”.
"Some dishwasher models are fitted with lights inside the chamber. The
lights come on when the door is opened by about 35 cm.
The light switches off when the door is closed.
If the door is left open, the light will turn off automatically after
approximately 14 minutes.
CANCELLING THE CURRENT PROGRAM
To cancel the currently selected program open the door and hold
down the PROGRAM SELECTION (C) (marked "end").
Close the door.
After approximately 1 minute the dishwasher will advance to the end
of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
DEACTIVATING THE AUDIBLE SIGNAL AT THE END OF THE CYCLE.
Press and hold the delayed start button until “bon” appears on the
display.
Release the delayed start button and then press it again; “bof”
appears on the display.The audible signal that indicates the end of the
cycle will be deactivated. Repeat the procedure to reactivate it.
This procedure also affects the acoustic signal (beep) when the buttons
are pressed.
The audible signals that are emitted at the end of the cycle and when the
buttons are pressed cannot be selected independently.
Loading ...
Loading ...
Loading ...