Loading ...
Loading ...
Loading ...
Installation instructions
Connection of the inlet hose
1. Select the appropriate type of outlet as shown in the figure.
5.Check for leak
(1).Swing the water inlet hose gently to confirm if it’s suitable.
(2).Turn on the water faucet and check for leak.A small amount of water might
enter the machine.You will drain this later.
2. Before installation, run water through both faucet and inlet hose, to get rid of
particles in the water line that might clog the inlet valve screen.
3. Make sure a seal washer seating at the joint of inlet hose, then connect
the inlet hose to the fauct.
seal washer
4. Make sure a seal washer seating at the joint of inlet hose, then connect
the inlet hose to the water inlet valve.
seal washer
joint
water inlet valve
- 7 -
Connection of the inlet/drain hose
Loading ...
Loading ...
Loading ...