Loading ...
Loading ...
Loading ...
8
OPERATION
When ready to clean, release the Trigger
Lock (10A), then pull the trigger of the
Spray Gun to begin spraying (Fig. 10)
When releasing the Spray Gun trigger the
pressure washer will stop automatically.
The machine will start again when you
reactivate the Spray Gun.
• NOTE: Switch the machine OFF if intended to be left unused for 5 minutes or longer
WHEN CLEANING IS COMPLETED:
• Disconnect the electrical plug from the socket
• Shut off the water supply and pull the trigger to relieve all pressure from the machine
• Press the Trigger Lock on the Spray Gun
To avoid damage, keep the end of the Spray Lance at least 50cm away from the surface when
cleaning painted or sensitive surfaces. Always start by aiming the Lance away from the surface to be
cleaned and adjust the nozzle to the desired setting before starting cleaning.
!
CAUTION:
Dry running of more than 2 minutes leads to damage of the high-pressure pump. If
the appliance does not build up pressure within 2 minutes, switch the machine off
and see Troubleshooting on pages 11 - 12 for more instructions.
!
CAUTION:
Fig. 10
Loading ...
Loading ...
Loading ...