Loading ...
Loading ...
Loading ...
9
System Setup
Transmitter / Receiver IR Quick Sync
With the receiver in normal operating mode, and the TRANSMITTER OFF, push and
hold the SET button on the receiver to sync the transmitter to the receiver. While the
receiver is sending the signal, turn the transmitter ON. If, for some reason, your
transmitter is not on the same channel from the last usage, you can use the IR Quick
Sync method to quickly sync the transmitter without having to page through the
group and channel setting functions.
Transmitter Sync’ing
When sync’ing the transmitter, it is best to power the transmitter OFF first, then
power the transmitter on while your sending the sync from the receiver. This
procedure will re-set the transmitter, allowing for it to sync to the newly selected
channel before it locks / syncs to a channel on the receiver.
Loading ...
Loading ...
Loading ...