Loading ...
Loading ...
Loading ...
5
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the cables.
7. Check whether the image on the monitor is gotten
from the optimum angle. If not, adjust the camera
according to the figure below to get an optimum
angle.
Pan Position
0° to 355°
Tilt Position
0° to 75°
Rotation Position
0° to 355°
Figure 2-9 3-Axis Adjustment
8. Adjust the tilt position [0° to 75°], the pan position
[0° to 355°], the rotation position [0° to 355°].
9. Install the bubble back to the camera.
Figure 2-10 Install the Bubble Back
10. Tighten the screws on the bubble of the dome
camera to finish the installation.
Figure 2-11 Finish Installation
2.2.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box separately.
Steps:
1. Paste the drill template to the ceiling.
2. Drill 2 screw holes and the cable hole in the ceiling
according to the drill template.
3. Install the junction box to the ceiling with four PA4 ×
25 screws.
Figure 2-12 Fix the Junction Box
Loading ...
Loading ...
Loading ...