Loading ...
Loading ...
Loading ...
EN - 8
Use
How to cool the heating element
(Fig. H)
When the temperature of the
heating element is too high to
dispense coffee, buttons (20) and
(21) ash simultaneously
.
The heating element must be cooled down
if you wish to prepare a coffee immediately
after frothing milk.
If the heating element is not cooled down, the
coffee dispensed will taste burned.
To cool it quickly, proceed as follows:
• Position a container underneath the steam
wand (7) and turn the steam knob (8) anti-
clockwise to dispense hot water.
• The steam wand (7) will initially dispense
steam. Burns hazard. Successively, hot
water will be dispensed. This means that
the heating element has reached the correct
temperature to dispense coffee.
• Turn the steam knob (8) clockwise and
prepare the coffee.
3.5 Dispensing hot water (Fig.
H)
• Turn the machine on using the ON/OFF
switch and wait until the coffee dispensing
LEDs have a xed light.
• Position a recipient under the steam wand
(7).
• Turn the steam knob (8) anti-clockwise and
dispense hot water.
• Stop dispensing by turning the steam knob
(8) clockwise.
3.6 Accessing the
programming menu and
changing the settings
• Make sure that the machine is ready for
use and maintenance. Press the key (23)
for 5 seconds until all keys start to ash:
the machine is in programming mode.
• Set the machine to meet your requirements
(see the next page).
• To exit the menu, wait for 30 seconds
without pressing any key.
Setting the coffee temperature
• Access the programming menu.
• Press the key (20) to set the temperature of
the coffee.
• The key (20) ashes 3 times, after which
the current setting LEDs turn on:
LEDs
Setting the
temperature
Low
Medium
High
• The LEDs start to ash in sequence.
• Press the key corresponding to the desired
temperature: low (20), medium (21) or high
(22).
• The key selected ashes to indicate the
selection has been stored and a single
sound is emitted if the acoustic signals are
activated.
Loading ...
Loading ...
Loading ...