Loading ...
Loading ...
Loading ...
11
15. INSTALL DECORATIVE FLUE
ALL INSTALLATIONS:
Carefully slide in place decorative flue base (notches end first) in the groove
(shaded part in inset at right) behind the exterior wall of the top of the hood.
DUCTED INSTALLATIONS:
Slide up the upper flue until it is aligned with its mounting bracket. The bracket must be
inside the flue. Secure the upper flue to its bracket using 2 no. 8 x 3/8” included screws for
stainless steel model or 2 no. 8 x 1/2” included black quadrex screws for black stainless
model. See illustration beside.
NOTE: Duct not shown in illustration to ease understanding.
Remove protective plastic film covering the upper flue.
16. REINSTALL MICROMESH (VCS500) OR HYBRID FILTERS (VCS550)
Rest filters springs in range hood inside rear groove. Using finger
cup, tilt up the filters into position. Make sure both screws located
in the front panel edge of the hood are securely engaged in both
filters oval holes (A) after installation.
HD0814
A
HO0140
UPPER FLUE MOUNTING BRACKET
FRONT VIEW
UPPER
FLUE
VCS500
Rest rear filters edge on filter springs in the range hood. Using
finger cup, tilt up the filters into position. Make sure both tabs (B) are
securely engaged in range hood front edge slots after installation.
VCS550
HO0272
HD0815
B
NON-DUCTED INSTALLATION:
Slide the upper flue up to the ceiling. The plenum must be inside the flue. Secure the upper
flue to the plenum sides using 2 no. 8 x 3/8” screws (included) per side for stainless steel
model or 2 no. 8 x 1/2” quadrex black screws (included) per side for black stainless model.
NOTE: Ceiling not shown in illustration to ease understanding.
HA0136
ALL INSTALLATIONS:
Remove protective plastic film covering the upper flue.
Loading ...
Loading ...
Loading ...