Loading ...
Loading ...
INSTALLATION INSTRUCTION
1. Drill two holes on the wall and insert two plastic expansion bolts in it.
2. Fix the metal plate on the plastic expansion piece with self-tapping screws.
3. Fix the lamp body on the plate and tighten the screws.
4. Switch on and test.
MAINTENANCE & WARNING
• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee
flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don’t immerse in the water.
FUNCTION OF SENSOR
1. Press switch start(turn on)100% brightness when motion is detected and light
turn o when no one come in.
2. Turn 100% brightness when motion is detected and 10% light when people go away.
3. Alway low light 10%.
4. Turn o.
High Light High LightLow Light Standby Time
1. Mode A:
Press start (Turn On)
high light 25s, then
standby time
2. Mode B:
When sensor on high light
25s, then low light
3. Mode C:
Always low light
4. Mode D:
(Turn o)