Loading ...
Loading ...
Loading ...
拓陽精密科技
11
2. POWER INSPECTION：
●M ake sure that the voltage of 1.5V ignition power supply is normal and the storage power is full.
（No ignition power supply is needed when using three in one electrical regulation）
●M ake sure that the 11.1V universal battery voltage is normal and the storage capacity is full.
3. INITIAl NEEDLE SETTING：
The prerequisite is adequate lubrication and cooling. The engine is run with very important oil
needle settings: The excess oil not only provides rich lubrication, but also conducts heat from the
surrounding metal and further assisted by the fuel nitro methane. the two-stroke model engines in
pre-heating into the cylinder through the crankcase on a longer trip. But The four-stroke engine,
with its intake pipe and carburetor mounted high on the cylinder cap, means that the rich mixture
of cooling fuel and air will flow directly into the cylinder directly.With the help of fan cooling, it can
provide excellent operation experience for every enthusiasts. You can also buy the TOYAN series of
water cooling accessories, so that your engine will be able to maintain stable operation for a long
time.
Ｒｅｍｉｎｄｅｒ！
When leaving the factory, each engine has completed the needle setting. If you have adjusted the
needle during use, it is recommended that the pair of main oil needle be adjusted to 2.0 laps and
the pair of auxiliary oil needle to 1.5 laps. Since the methanol engine needs to keep the filament
temperature of the electric plug in order to realize ignition, when the engine is in the oil-rich state
for a long time at low speed, the filament temperature will gradually decrease, resulting in ignition
difficulties, so it is necessary to pull high speed oil at intervals to avoid oil-rich at low speed.
Loading ...
Loading ...
Loading ...