Loading ...
Loading ...
Loading ...
9
8
Plug in your unit and press the power
knob. Set your desired fan speed by
turning the power knob. Your Credenza has
nine fan speeds that are displayed by F1 (the
lowest speed) through F9 (the highest speed).
Turn the humidity control knob to set
your humidity level from 25% to 65%.
The humidistat on your cord will read your
home’s humidity and turn your fan o when
the set humidity level is reached. When set to
65%, your unit will run continuously.
That’s it! Your Credenza is ready to use.
9
10
11
Put the fan assembly and top grille on
the base. Wait 20 minutes for the wick to
become fully saturated, then proceed to step 10.
7
Note: On higher speeds, the Credenza puts out a tremendous
amount of humidity, so it’s louder on these levels. Most of our
customers liken it to the sound of a box fan. Rest assured there is
nothing wrong with your unit, it’s just working very hard to put out
much-needed humidity.
F – The F code means your unit is empty and needs to be FILLED with water.
CL – Your CONTROLS ARE LOCKED on the current setting. Activate the control lock by holding the power button for five
seconds, until CL appears. Your Credenza will lock on the current fan and humidity settings. Release the lock by pressing the
power button again for five seconds until the display flashes CL three times, letting you know the lock is o.
CF – The CF code triggers after 720 hours of use and means it’s time to CHECK YOUR FILTER (wick). Unplug your unit and
check your wick. If your wick is still in good shape, simply clear the code by plugging your humidifier back in. If your wick
needs replacing, install a new 1041 Super Wick®.
ABOUT THE CODES
Regular cleaning is important for preventing mold,
mildew, and other bacterial growth in your humidifier.
It also keeps your Credenza working its best.
1. Let the unit run until it’s empty, then turn it o and
unplug it.
2. Remove the top, fan assembly, bottles, and the
wick. Throw your wick away if it is time to replace it.
Otherwise, put it in a sink while you finish cleaning your
Credenza.
3. Pour out any remaining water from the cabinet and
water tanks.
4. Fill the cabinet half-full with water and add 1 cup of
white vinegar. Let sit for 20 minutes. To disinfect,
replace the vinegar with 1 teaspoon of bleach. Do not
mix vinegar and bleach.
5. Fill the water bottles half-full with water and add 1
cup of white vinegar to each. Put the caps back on,
shake the bottles gently, then let sit for 20 minutes.
To disinfect, replace the vinegar with 1 teaspoon of
bleach in each bottle.
6. After 20 minutes, empty the cabinet and bottles.
7. Dampen a sponge with white vinegar, wipe down
the cabinet interior and bottles, then rinse everything
thoroughly. To disinfect, replace the vinegar with
bleach.
8. Wipe everything dry and replace the wick, if needed.
Then reassemble.
HOW TO CLEAN YOUR CREDENZA
10
11
When storing your Credenza, discard the used wick and
disinfect the unit using the directions above. Dry the unit
thoroughly, and store in a temperature-regulated area. Do not
install a new filter until you are ready to use your humidifier again.
6
Loading ...