Loading ...
Loading ...
Loading ...
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with
four PA4 × 25 screws that come with the junction
box.
Junction Box Body
Figure 2-10 Secure the Junction Box Body
6. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
7. Combine the junction box cover with the base of the
camera and secure it with two M4 × 10 screws.
Junction Box Cover
Camera Base
Figure 2-11 Combine Junction Box Cover and Camera
Base
8. Fix the junction box cover onto the junction box
body with three M3 screws.
Junction Box Body
Junction Box Cover
Camera Base
Figure 2-12 Combine Junction Box Cover and Junction
Box Body
9. Connect the power cord and video cable and put
the cables back into the junction box.
10. Repeat the steps 6 to 9 of 2.2.3 Ceiling Mounting
Without Junction Box to finish the installation.
Figure 2-13 Finish the Installation
2.2.5 Wall Mounting
Before you start:
Loading ...
Loading ...
Loading ...