Loading ...
Loading ...
Loading ...
Troubleshooting en-us
27
Issue Cause and troubleshooting
Water output is reduced. Low water pressure.
▶
Check the pressure of the water supply system or the external water filter sys-
tem, e.g. reverse osmosis system.
Connect the appliance only to a water connection with sufficient water pressure.
→
Page6
The water filter is blocked.
▶
Change the water filter. →
Page19
Water is dripping from the water
dispenser.
Air is in the water system.
▶
Keep dispensing water until it contains no more air.
The water dispenser is not func-
tioning.
There is no water supply.
▶
Ensure that there is a water supply and that the shut-off valve on the water con-
nection is open.
Contact an installer if necessary.
Kink in the water hose.
▶
Turn off the water supply and straighten the kink in water hose.
If necessary, replace the water hose.
Ice cube production is low. The appliance has only recently been connected.
▶
Wait approximately 4 hours until the first batch of ice cubes is ready.
The freezer compartment has been opened frequently or for an extended period of
time.
▶
Check ice cube production after a few hours.
Low water pressure.
▶
Check the pressure of the water supply system or the external water filter sys-
tem, e.g. reverse osmosis system.
Connect the appliance only to a water connection with sufficient water pressure.
→
Page6
The water filter is blocked.
▶
Change the water filter. →
Page19
Food or objects are blocking the fill level sensor for the ice maker.
▶
Remove all food and objects from the ice storage container.
Fault in the ice maker.
1.
Switch off the appliance. →
Page13
2. Disconnect the appliance from the power supply.
Unplug the power plug or switch off the circuit breaker in the fuse box.
3. Reconnect the appliance after 5 minutes.
4.
Switch on the appliance. →
Page13
5.
If the fault persists, call customer service. →
Page29
The ice maker is not functioning. Ice cube production is switched off.
▶
Switch on ice cube production. →
Page20
There is no water supply.
▶
Ensure that there is a water supply and that the shut-off valve on the water con-
nection is open.
Contact an installer if necessary.
Kink in the water hose.
▶
Turn off the water supply and straighten the kink in water hose.
If necessary, replace the water hose.
Fault in the ice maker.
1.
Switch off the appliance. →
Page13
2. Disconnect the appliance from the power supply.
Unplug the power plug or switch off the circuit breaker in the fuse box.
3. Reconnect the appliance after 5 minutes.
4.
Switch on the appliance. →
Page13
5.
If the fault persists, call customer service. →
Page29
Loading ...
Loading ...
Loading ...