Loading ...
Loading ...
Loading ...
3
Unmanaged PoE+ Switch
Introduction
Switch Indication
Recovery
(1–16)
Off: The PoE Auto Recovery function is disabled.
On: The switch will constantly detect the working status of a PoE powered device (PD).
When the switch finds that the PD works abnormally, the switch will reboot it.
10/100 Mbps RJ45 Port (Port 1–16)
The ports are designed to connect to devices with a bandwidth of 10 Mbps or 100 Mbps. The ports
can provide power and transmit data for PDs. The maximum PoE power for each PoE port is 30 W. The
maximum PoE power for all PoE ports is 150 W (for TL-SL1218P)/250 W (for TL-SL1218MP). The ports
can also connect to non-PoE devices, but only transmit data.
10/100/1000 Mbps RJ45 Port (Port 17–18)
The ports are designed to connect to devices with a bandwidth of 10 Mbps, 100 Mbps or 1000 Mbps.
SFP Port (Port 18F for TL-SL1218P/Port 17F–18F for TL-SL1218MP)
The ports are designed to install the SFP module. An SFP Port (port 17F/port 18F) and the associated
10/100/1000 Mbps RJ45 Port (port 17/port 18) are called a “Combo” port, which means they cannot be
used simultaneously; otherwise, only the SFP port works.
The front panel of TL-SL1226P is shown as the following figure.
Figure 1-3 Front Panel of TL-SL1226P
10/100 Mbps
RJ45 Port (Port 1-24)
LEDs Switches 10/100/1000 Mbps
RJ45 Port (Port 25-26)
SFP Port
(Port 25F-26F)
LEDs
LED Indication
PWR
On: The switch is powered on.
Off: The switch is powered off.
Link/Act
For Port 1–24:
On: Running at 10/100 Mbps but no activity.
Flashing: Running at 10/100 Mbps and is transmitting or receiving data.
Off: No device is linked to the corresponding port.
For Port 25–26/25F–26F:
Green On: Running at 1000 Mbps but no activity.
Green Flashing: Running at 1000 Mbps and is transmitting or receiving data.
Yellow On: Running at 10/100 Mbps but no activity.
Yellow Flashing: Running at 10/100 Mbps and is transmitting or receiving data.
Off: No device is linked to the corresponding port.
Loading ...
Loading ...
Loading ...