Vivotek ND9323P Vivotek ND9323P User Manual

Loading ...

VIVOTEK - Built with Reliability

20 - User's Manual

Terminal Block Connections

The terminal block pinouts is shown as follows:

The relay pins default status is set to Normally Open. Connect your relay or external devices’

signal wires to the system, the system will automatically detect the current signal status. You

can then trigger the external devices using the DI/DO panel on the live view.

You can also congure the system alarm setting for the system to automatically trigger a relay

pin on the occurrence of system events. See Alarm settings on page 101.

ssss

Normally Open

Common pin

Normally Closed

Coil

1 Relay_NO

2 Relay_COM

3 DI1

4 DI2

5 DI3

6 DI4

7 GND

8 GND

The GND are common ground for the DIs.

2-6. Limitations:

• When you are exporting video to the disk drives in an external storage, you cannot

select the other disk drives to create a new volume.

• If the disk drives or volumes in the external storage is smaller than 1TB, you cannot

congure them as volumes for the NVR.

• The connection interface to external storage must comply with the USB 3.0

specications.

2-7. The RAID or volume conguration in the NVR does not extend to include devices in the

external storage.

Loading ...

Vivotek ND9323P 8 Channel PoE Network Video Recorder