Loading ...
Loading ...
Loading ...
18 • Residen al Electronic Thermostat Electric Water Heater Use and Care Guide
OPERATION
OPERATION
Wi-Fi (Control
Assembly)
This water heater comes equipped
with the iCOMM™ remote monitoring
system. The app allows users to
control the water’s functions, monitor
critical operations, and diagnose
issues (available for IOS and Android).
The iCOMM™ system can
automatically notify selected
personnel via email and/or cellular
phone text messages if operational
problems occur.
It is recommended the water heater
app be installed on the homeowner’s
device prior to setting up the Wi-Fi
function on this water heater.
Wi-Fi Set Up
The Wi-Fi signal is set to OFF by
default and will not produce a signal
un l ac vated.
NOTICE: Have the router SSID and
password ready.
• Download the iCOMM U li es app
for your smart phone.
• Launch the iCOMM U li es app on
your smart phone, then follow the
simple steps. The iCOMM U li es
app makes it easy to set up, program
and control your water heater.
• Create an account or log in to your
exis ng account and tap the “add a
water heater” bu on.
• When the app prompts you to
ac vate the Wi-Fi signal, proceed
with the following steps:
1
To ac vate the Wi-Fi signal,
press the Wi-Fi bu on once.
The LED will blink on and off in
1/2 second intervals. Wi-Fi will
ac vate pairing mode See Figure 22.
°C
DAYS
ENTER
Pressing the Wi-Fi button once will activate
the Wi-Fi signal for 15 minutes.
Figure 22 - Wi-Fi Control
2
The app will display a
temporary Wi-Fi network to
connect to your device. Select
the network that matches the water
heater DSN value, and your device will
connect to the Wi-fi radio on the
Control Assembly:
Figure 23 - Select Temporary Network
3
The app will begin the
communica on process of
linking your water heater to
your Wi-Fi router.
4
Select your preferred Wi-Fi
network from the list on the
app. LED will pulse from dim to
bright when a emp ng to connect to
local network.
Figure 24 - Select Your Wi-Fi Network
NOTICE: If the app does not prompt
you with a list of available Wi-Fi
networks, access Wi-Fi se ngs on
your device and select your preferred
network
5
The app will a empt to
connect with your Wi-Fi
network. We recommend
connec ng to a Wi-Fi network that
has been secured with a password.
The LED will hold solid when
connected.
6
The app will display the water
heater temperature set point.
7
Confi gure the water heater
Set Point, Mode, and Time of
Use Rate Plan if applicable.
NOTICE: If the Wi-Fi signal is to be
terminated, press and hold the Wi-Fi
bu on for 3 seconds. This will turn
the Wi-Fi signal off . The Control
Assembly will beep once. The Control
Assembly resets and the LED display
will turn off . The original connected
network has been removed from the
memory of the water heater Control
Assembly.
Loading ...
Loading ...
Loading ...