Loading ...
Loading ...
Loading ...
T+/T+PRO English Instruction Sheet
Page 10
Testing for Continuity
XW Warning
To avoid electrical shock:
• Make sure the power to the circuit is turned off and all
capacitors are discharged.
• If the beeper is disabled, the Tester will not beep and only
P will light. On the T+ PRO, the display will also show .
To measure continuity, turn off circuit power and connect the probes to the
circuit under test. Continuity (a resistance less than 20 kΩ) is indicated by
the beeper and a lighted P. If the beeper is disabled, it will not sound
during this test. The T+PRO shows on the LCD. If the resistance is
greater than 20 kΩ, the beeper will not sound and P will not light. Refer
to Figure 3.
open
CONTINUITY
CONTINUITY
48
24
12
CONTINUITY
CONTINUITY
48
24
12
eqc02f.emf
Figure 3. Continuity Test
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...