Loading ...
Loading ...
Loading ...
TOYAN
拓陽精密科技
45
2.Fuel
Please use quality guaranteed methanol model engine fuel. Self - dispensing or counterfeit fuel will
greatly reduce the performance and life span of the engine. Since it is a four-stroke engine, in order to
ensure the normal operation of the engine, we require the only 20-25% nitro methane fuel can be
used. If high nitro fuel is used, the ignition time and cylinder pressure of the engine will be greatly
affected, and the normal and stable operation cannot be maintained. When the nitro content of the
fuel increases or the brand of fuel change , it is recommended to use oil-rich needle adjustments to
run the engine so that the optimal setting for the new fuel can be rechecked, (please adjust the ratio
of gasoline fuel to 1:25 to 1:30, and use 2T engine oil).
Remind!
If the engine is running at very high speeds and on high nitro fuel,The life of the spark plug
does not last long. Please note that engine fuel is toxic. Keep it out of contact with eyes or
mouth and always store it in a clearly marked container and place, and keep out of reach of
children. It is highly flammable. Keep away from open fires, overheating or any source of
ignition
3.Fuel tank
It is recommended to use a 100cc tank. The tank should be installed on the same flat as the engine.
The gap between the fuel inlet & outlet of the fuel tank and carburetor should be kept within 1 cm
(the carburetor must be higher than the fuel inlet & outlet of the fuel tank). If the gap is too high,
the carburetor's working efficiency will be reduced and the engine will be started adversely. To
ensure clean fuel supply, pls use standard 5mm silicone tubing and properly install oil filters. Since
the engine itself relies on negative pressure to absorb oil, it is recommended the muffling exhaust
pipe can be used to pressurize the fuel tank
Loading ...
Loading ...
Loading ...