Loading ...
Loading ...
Loading ...
5
CAUTION
Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between dierent container styles, types and sizes. Use the tamper that was
supplied with your blender or container (if purchased separately from the motor base).
IMPORTANT! KNOw YOuR VITAMIx CONTAINeR, LId ANd TAMPeR
Lids and tampers are not interchangeable between
dierent container styles, types and sizes. Use the
tamper and lid that was supplied with your blender.
How to Determine the Tamper to be Used with Your
Container
Before using a tamper during the blending, verify that
you have the correct tamper. Only use the tamper
with the lid securely locked in place and the lid plug
removed. If a tamper came with your blender at
purchase, it is the correct tamper to use. If a tamper
did not come with your blender or you want to
determine if a tamper that you already have can be
used with your new container, please use these steps
and illustrations to determine what tamper to use.
1. Place the lid on an empty container.
2. Remove the lid plug and insert the tamper through
the lid plug opening. The tamper should fit easily
into the opening. It should not come into contact
with the blades no matter where you move the
tamper inside the container.
3. Visually inspect: IF THE TAMPER TOUCHES THE
BLADES AT ANY ANGLE, DO NOT USE THE
TAMPER WITH YOUR CONTAINER.
4. If you do not have the correct tamper for your
container, contact your distributor for assistance.
48 oz. / 1.4 L Stainless Steel and Aer Disc
Containers use a tamper (S2) which is
approximately 11 inches long.
Note: The S2 tamper must be used with
the clear-lid containers only.
64 oz. / 2.0 L Tall Containers use
a tamper which is approximately
12-½ in. long.
OT h e R VI TA M I x CO N TA I N e R s A N d TA M P e R s
Tamper
Blade Assembly
Lid
48 oz / 1.4 L Wet Containers use a tamper which
is approximately
9-¾ in. long
DO NOT use the S2 tamper with this container.
64 oz/2,0 L Legacy Tall
48 oz/1,4 L Stainless Steel
Note: A non-step tamper MUST NOT be used with any Vitamix container.
48 oz / 1.4 L
0.9 L (32 oz) Legacy Dry Containers
use a tamper which is approximately
9-¾ in. long.
32 oz/0,9 L Legacy Dry
Lid Plug
64 oz / 2.0 L
Lid
Lid Plug
Tamper Splash Disk
How to use the Tamper:
IMPORTANT! The splash disk (near the top of
the tamper) and lid prevent the tamper from
hitting the blades when the lid is secured
properly in the locked position.
• The container should not be more than two-
thirds full when the tamper is used during
blending.
• To avoid overheating during blending,
DO NOT use the tamper for more than 30
consecutive seconds.
• If the food does not circulate, the blender
may have trapped an air bubble. Carefully
remove the lid plug, while making sure the
lid stays firmly in place. Release the air
bubble by inserting the tamper through the
lid plug opening.
• Holding the tamper straight down may not
help the ingredients circulate. If necessary,
point the tamper towards the sides or
corners of the container. DO NOT try to
force the tamper deeper into the container.
• Always use the lid and the lid plug when operating the blender.
• Never operate the blender without checking to make sure that the lid is securely locked in place.
• Insert the lid plug through the lid plug opening. Lock the plug in place by turning clockwise. To remove, turn counter-clockwise and lift
out.
• Remove the lid plug to use the tamper or to add ingredients.
Tips to prevent ‘overloading’ your blender:
• Do not process recipes at lower or higher speeds than recommended.
• Do not process recipes for longer than recommended.
• Use your tamper to process thicker mixtures and keep ingredients moving around and through the blades.
Blade Assembly
PR O P e L se R I e s CO N TA I N e R s
Tamper
Tamper Splash Disk
64 oz. / 2.0 L Wet Containers with black lid use the a tamper
which is approximately 11 inches long.
DO NOT use the S2 tamper with this container.
S2 tamper
Loading ...
Loading ...
Loading ...