Loading ...
Loading ...
Loading ...
11
BACKGUARD INSTALLATION INSTRUCTION
HOW TO INSTALL THE ANTI-TIP BRACKET
Please follow the following installation instructions in
sequence:
• Place the backguard and fasten it with the two
screws as shown in gure.
• Please refer to a qualied installer in case the
enclosed hardware cannot be utilized.
Fig. 3
Two bottom screw x backguard
• A child or adult can tip the range and be killed
Install the anti-tip device to the structure and/or the ran-
ge ( see pictures for details) Engage the range to the
anti-tip device as explained in the pictures.
Re-engage the anti-tip device if the range is moved See
pictures for details. Failure to do so can result in death or
serious burns to children or adults
WARNING
• Mark the total height on the rear wall at the centre
of the cooker width. Make two holes and install
the xing bracket.
OPTION 1: wall mounted bracket
ATTENTION: check that the cooker is leaning against
the rear wall to avoid tipping.
Fig. 4a
• Adjust the height of the xing brackets based on the
measurement made as explained above. Fix them to
the oor as shown in the picture below.
OPTION 2: oor mounted bracket
ATTENTION: in this case 2 brackets are needed
• Unpack the cooker and mount the feet and adjust
the height.
• Measure the height from the oor to the top edge of
the back-cross bar (Fig. 4) and add 15mm.
Fig. 4
Fig. 4 b
Fig. 4c
Loading ...
Loading ...
Loading ...