Casio PRG-340SC

User Manual - Page 13

For PRG-340SC.

PDF File Manual, 34 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Alarm and Hourly
Time Signal
The watch will beep when the alarm time is
reached. You can configure up to four
standard daily alarms, and one daily alarm
with snooze. The hourly time signal causes the
watch to beep every hour on the hour.
Snooze causes the alarm to sound up to
seven times, at five-minute intervals.
The alarm sound is muted in the cases
described below.
ー 
When battery power is low
ー 
When watch is at Level 2 power saving
l
Power Saving Function
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Use (A) and (C) to select the alarm
([AL-1] to [AL-4], or [SNZ]) whose setting
you want to change.
Alarm number
Alarm time
3. Hold down (E) for at least two seconds.
Release the button when the hour setting
starts to flash.
The (alarm) indicator is displayed
when any alarm is turned on.
Alarm hour
4. Use (A) and (C) to change the hour setting.
Holding down (A) or (C) scrolls through
settings at high speed.
If you are using 12-hour timekeeping,
[P] indicates p.m.
5. Press (D).
This causes the minutes digits to flash.
Alarm minute
6. Use (A) and (C) to set the minute setting.
7. Press (E) to complete the setting
operation.
Note
If you do not perform any operation for
about three minutes while in the Alarm
mode, the watch automatically returns
to the Timekeeping Mode.
To stop the alarm
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Snooze causes the alarm to sound up to seven
times, at five-minute intervals. To cancel a
snooze alarm, turn [SNZ] off.
l
Turning Off an Alarm or the Hourly Time
Signal
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
Configuring the Hourly Time
Signal Setting
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (A) or (C) to display the hourly time
signal screen ([SIG]).
3. Press (B) to toggle the hourly time signal
between enabled and disabled.
(hourly time signal) is shown on the
display while the hourly time signal is
turned on.
Watch Operation Guide 3513
13
Loading ...
Loading ...
Loading ...