Wet Sounds WS-MC-20 Owner's Manual

Loading ...

Wet Sounds WS-MC20 1 Piece Marine Receiver Operations / Installation Manual

WS-MC-20 BASIC CONTROLS

CROSSOVER Select to allow adjustment of the Crossovers:

FRONT HPF This controls the frequencies which are

allowed to pass through the Front outputs – both

powered and pre-amp. Choosing 60Hz, 80Hz, or 120Hz

means that all frequencies below those will be blocked

from passing. Choosing All Pass Filter (APF) will allow all

frequencies to pass through the front outputs.

REAR HPF Same as above, but affects the Rear Outputs.

ZONE 2 LPF Select to allow adjustment of the Crossovers:

SUBWOOFER

This controls the frequencies which are allowed to pass

through the ZONE 2 outputs – which are mixed mono

& Pre-amp only. Choosing 60Hz, 80Hz, or 120Hz means

that all frequencies above those will be blocked from

passing. This would be ideal for an amplier driving a

subwoofer or a self-amplied subwoofer.

FULL RANGE

Choosing All Pass Filter will allow all frequencies to pass

through the ZONE 2 Outputs. This would be ideal for an

amplier driving a set of Tower Speakers.

SYSTEM Allows access to the following system adjustments:

AREA The WS-MC-20 is defaulted to receive broadcasts

in the USA region, but Russia, Latin America, Asia,

Japan, Middle East, Australia & Europe regions are also

available through this setting.

DAY NIGHT MODE Allows the ability to scroll through the

display options of DAY (white screen/black characters)

NIGHT (black screen/ white characters) or AUTO.

In AUTO mode, the display is in DAY mode until the

vehicle’s lights are turned on, then the display goes

into NIGHT mode. PLEASE NOTE – in order for the AUTO

function to operate properly, the Orange wire in the

WS-MC-20 harness labeled DIM INPUT must be wired

to a circuit in the vehicle that gets +12V whenever the

main lighting switch is turned on.

Loading ...

Wet Sounds WS-MC-20 Media Receiver Compact 2-Zone with SiriusXM-Ready WSMC20