Loading ...
Loading ...
Loading ...
Installation instructions en
19
Suitable tilt protection can be obtained from customer
service, on our website or in the online shop.
→"Fitting tilt protection", Page19
Do not install the appliance above an appliance that
generates steam, e.g. above a dishwasher, a combi-
steam oven or a steam oven.
Fitting tilt protection
Suitable tilt protection (order number: 12039458) can
be obtained from customer service, on our website or
in the online shop.
1.
Measure a clearance of 518mm from the front
edge of the unit and mark it on both sides in the fit-
ted unit.
2.
Screw the two brackets into the elongated hole be-
hind the mark.
3.
Place the appliance on a flat surface.
4.
Unscrew the two lower screws on the rear of the ap-
pliance.
5.
Use the two screws to tighten the two metal retain-
ers on the rear of the appliance.
‒ Ensure that the metal retainers are aligned ex-
actly with the edge of the appliance.
6.
Slide the appliance into the fitted unit and check
whether the tilt protection engages.
7.
If required, correct the position of the bracket with
the elongated hole.
8.
Finally, screw the brackets to the fitted unit.
9.
Insert the power cable fully into the appliance.
10.
Push the appliance into the fitted unit.
‒ Do not pinch the power cable.
Loading ...
Loading ...
Loading ...