Loading ...
Loading ...
Loading ...
8 se c t i O n 3 — as s e M b l y & se t -up
2.
the first hole (closest to the end of the tube) in the hose
Release the pin to lock the hose in place.3.
Lay hose tubing in curved end of hose handle next to
chipper chute and into hose cradle (if applicable). See Fig.
3-5A & B.
Snap the hose handle first into the upper hose handle 5.
bracket and then into the lower hose handle bracket. See
Fig. 3-5C.
Loosen the wing nut that secures the rope guide to the
right side of upper handle.
Slowly pull starter rope out of engine.a.
Slip the starter rope into the rope guide. Tighten the b.
wing nut. See Fig. 3-3.
Hose Assembly
Slide hose adapter of hose assembly into the base adapter
located on the left front of the Chipper shredder Vacuum.
A
B
Figure 3-3
Figure 3-4
A
B
Align Pin with
this Hole
Figure 3-5
C
A
B†
† If Applicable
Loading ...
Loading ...
Loading ...