Loading ...
Loading ...
Loading ...
Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
68
rectangle as the ROI region. You can click Clear to cancel former drawing.
Click Stop Drawing when you finish.
(4) Select the ROI level.
(5) Enter a region name for the chosen region.
(6) Click Save the save the settings of ROI settings for chosen fixed region.
(7) Repeat steps (1) to (6) to setup other fixed regions.
6. Set Dynamic Region for ROI.
(1) Check the checkbox to enable.
Note: To enable this function, the face detection function should be supported
and enabled.
(2) Select the ROI level.
7. Click Save to save the settings.
Note: ROI level means the image quality enhancing level. The larger the value is, the
better the image quality would be.
7.4 metadata Settings
Before you start:
Go to 5.3.4 VCA Resource Type to set the VCA (Video Content Analysis) resource
type of your device.
Purpose:
To use the metadata for your third-party management platform, you should enable
metadata first.
Steps:
1. Go to Configuration > Video/Audio > metadata Settings.
2. Check the VCA type for metadata enabling.
3. Click Save to save the settings.
Loading ...
Loading ...
Loading ...