Loading ...
Loading ...
Loading ...
4
BATTERY
WARNING
To reduce the risk of re, personal
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in uid or allow a uid to ow
inside them. Corrosive or conductive uids, such
as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can
cause a short circuit.
Maintenance and Storage
Do not expose your battery or cordless tools to water or
rain, or allow them to get wet. This could damage the
tool and battery. Do not use oil or solvents to clean or
lubricate your battery. The plastic casing will become
brittle and crack, causing a risk of injury.
Store batteries at room temperature away from mois
-
ture. Do not store in damp locations where corrosion
of terminals may occur. As with other battery types,
permanent capacity loss can result if the pack is stored
for long periods of time at high temperatures (over 120°
F). MILWAUKEE Li-Ion batteries maintain their charge
during storage longer than other battery types. After
about a year of storage, charge the battery as normal.
WARNING
To reduce the risk of injury or ex-
plosion, never burn or incinerate a
battery pack even if it is damaged, dead or com-
pletely discharged. When burned, toxic fumes
and materials are created.
Disposing of MILWAUKEE Li-Ion Battery
MILWAUKEE Li-Ion batteries are more environmen-
tally friendly than some other types of power tool
batteries. Always dispose of your battery according
to federal, state and local regulations. Contact a
recycling agency in your area for recycling locations.
Even discharged batteries contain some energy.
Before disposing, use electrical tape to cover the
terminals to prevent the battery from shorting, which
could cause a re or explosion.
RBRC Battery Recycling Seals
The RBRC™ Battery Recycling Seals (see "Symbol-
ogy") on your batteries indicate that MILWAUKEE
has arranged for the recycling of that battery with
the Rechargeable Battery Recycling Corporation
(RBRC). At the end of your battery's useful life,
return the battery to a MILWAUKEE Branch Oce/
Service Center or the participating retailer nearest
you. For more information, visit the RBRC web site
at www.rbrc.org.
FUNCTIONAL
DESCRIPTION
1. Laser apertures
2. Laser mode indicator
3. On/O dial
4. Pivot Bracket
5. Battery compartment
6. Fuel gauge
7. Micro adjust
8. USB power outlet
9. Threaded insert
10. Magnets
11. Nameplate (3522-20)
12. Nameplate (3521-20)
(3522-20 shown)
CAT. NO. 3521-20 SER.
IEC 60825-1:20 14-05 t
P
≤70µs MAX OUT PUT P
AVG
≤7mW @ 510nm -
530nm COMPLIE S WITH 21 CFR 1040.1 0 AND 1040.11 EXCEPT FOR
CONFORMANCE WITH IEC 60825-1 ED . 3., AS DESCRIBED IN LASER
NOTICE NO . 56, DATED MAY 8, 2019. THIS DEVICE COMPLIES WITH PART
15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INT ERFERENCE, AND (2) T HIS DEVICE MUST ACCEP T ANY
I NTERFERENCE RECEIVED , INCLUDING INTERFERE NCE THAT MAY
CAUSE
UNDESIRED OPE RATION.
To avoid ex plosio n,
®
char ge only RE DLITHI UM USB ba tteries . Rechar ge indoo rs.
®
Para ev itar exp losione s, cargu e solo RE DLITHIU M
USB bat erías. C arga en e l interi or.
Pou r éviter l’explo sion, ch argez se ulemen t
®
RED LITHIU M U SB piles . Charge z à l’int érieur.
CROSS LINE
LASER
USB INPUT: 5 V 2 1 A MAX
OUTPUT: 4 V 2 1 A
CAT. NO. 3522-20 SER.
IEC 60825-1:2014-05 t
P
≤ 70µs MAX OUTPUT LINE P
AVG
≤ 7mW @ 510nm -
530nm; MAX OUTPUT POINT P
AVG
≤ 1mW @ 510nm - 530nm COMPLIES
WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR CONFORMANCE WITH IEC
60825-1 ED.3., AS DESCRIBED IN LASER NOTICE NO. 56, DATED MAY 8, 2019.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY I
NTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
CROSS LINE &
PLUMB POINTS
LASER
To avoid ex plosio n,
®
char ge only RE DLITHI UM USB batt eries. R echarge indoors .
®
Para ev itar exp losione s, cargu e solo RE DLITHIU M
USB bat erías. C arga en el interio r.
Pou r éviter l’explo sion, ch argez se ulemen t
®
RED LITHIU M U SB piles . Charge z à l’int érieur.
USB INPUT: 5 V 2 1 A MAX
OUTPUT: 4 V 2 1 A
1
2
3
1
4
1
8
6
10
9
5
7
6
10
11
12
Loading ...
Loading ...
Loading ...