Loading ...
Loading ...
Loading ...
Before using for the first time
23
Every dishwasher is tested at the fac-
tory. There will be residual water in the
machine from this test. It is not an in-
dication that the dishwasher has been
used previously.
Opening the door
In some programs, the door automati-
cally opens slightly to assist the drying
process.
This function can be deactivated, if pre-
ferred (see “AutoOpen” under “Set-
tings”).
Pull the handle hard to open the door.
Open the door fully to disengage the
locking mechanism.
At the end of the program, if the Au-
toOpen function is on, the door locking
rail automatically retracts.
The door locking rail must be fully re-
tracted before you close the door again.
To prevent a technical fault, do not
hold the door locking rail when re-
tracting.
If the door is opened during operation,
all functions are automatically inter-
rupted.
Risk of scalding due to hot water.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Risk of injury due to door opening
automatically.
The door may open automatically at
the end of the program.
Keep the area around the door free of
obstructions.
Caution: Avoid blocking doors.
The automatic door opening function
could cause doors to be blocked.
Install the dishwasher so that the
door does not block any other doors
or cabinet fronts when it opens auto-
matically.
Closing the door
Push the baskets in.
Raise the door upward until the catch
engages.
At the end of the program, if the Au-
toOpen function is on, the door lock-
ing rail must be fully retracted before
the door is closed. Otherwise, the
door locking rail will cause the door
to reopen.
Risk of crushing due to the door
closing.
When closing the door, you are at risk
of shutting your fingers in it.
Do not put your hand inside the door
as it is closing.
Loading ...
Loading ...
Loading ...