Loading ...
Loading ...
Loading ...
29
OPERATING THE CONTROLS
FOR BEST RESULTS
Start the Range Hood several minutes before cooking to develop proper
airflow. Allow the Range Hood to operate for several minutes after cooking
is complete to clear all smoke and odors from the kitchen.
BUTTON FUNCTION INDICATOR
A - POWER - A quick press turns the motor off.
-
B - SPEED 1 - A quick press turns the motor on at speed
one.
+
Reset Grease Filter and / or Charcoal Filter Alarm - A
long press with the motor and lights off to reset the
filter wash alarms.
All LED’s flash 3 times.
C - SPEED 2 - A quick press turns the motor on at speed
two.
+
Activate / Deactivate charcoal filter alarm - A long press
with the lights on and motor off will activate or deactivate
the charcoal alarm.
All LED’s flash twice (alarm
activated).
All LED’s lit (alarm deactivated).
D - SPEED 3 - A quick press turns the motor on at
speed three.
+
E - INTENSIVE - A quick press will operate intensive
speed for 6 minutes.
At the end of the 6 minutes the hood returns to the
speed that was set before. If intensive is set with the
motor turned off, the hood will turn off after 6 minutes.
-
F - DELAY - Activate / Deactivate the Delay function:
A Long press with the motor On and lights Off: (The
motor and lights will shut off after 15 minutes).
On until the hood switch Off.
G - LIGHT - Light button: The lights have 3 levels - high,
low, off.
It is also possible to change the "color temperature" or
"kelvin scale" on this hood. Using a 2 second long press, it
is possible to vary the color of the light between "warm"
and "cold". There are 5 possible color choices.
G - LIGHT
A - POWER
C - SPEED 2
D - SPEED 3
B - SPEED 1 F - DELAY
E - INTENSIVE
H - WI-FI
Loading ...
Loading ...
Loading ...