Loading ...
Loading ...
Loading ...
23
Step 4. Dishwasher installation steps
9
Please refer to the specified installation steps in the installation
drawings.
Please refer to the specified installation steps in the installation
drawings.
1. Affix the condensation strip under the work surface of cabinet. Please ensure the
condensation strip is flush with edge of work surface. (Step 2)
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
5. Place the dishwasher into
6. L
(Step 5 to Step 6)
7. Install the furniture door to the outer door of the dishwasher. (Step 7 to Step 10)
8.
9. The dishwasher must be secured in place.
the cabinet
a driver
a Philips screw driver
screws
.
Level the dishwasher. The rear foot can be adjusted from the front of the
dishwasher by turning the Philips screw in the middle of the base of dishwasher
use Philips screw . To adjust the front feet, use a flat screw driver and turn
the front feet until the dishwasher is level.
Adjust the tension of the door springs by using turning in a
clockwise motion to tighten the left and right door springs. Failure to do this could
cause damage to your dishwasher. (Step 11)
Fix the side with .
Loading ...
Loading ...
Loading ...