Loading ...
Loading ...
Loading ...
30
How to Use the Advanced Functions
SHORTCUT Function
SWING Function
COMFORTSENSE Function
SLEEP Function
The SLEEP function is used to decrease
energy use while you sleep (and don’t need
the same temperature settings to stay
comfortable).
Used t
The COMFORTSENSE function enables the
remote control to measure the temperature
at its current location.
When using AUTO, COOL, or HEAT functions,
measuring ambient temperature from the
remote control (instead of from the indoor
unit itself) will enable the air conditioner to
optimize the temperature around you and
ensure maximum comfort.
1. Press COMFORTSENSE button to activate
function.
The remote control will send temperature
signal to the unit every three minutes.
2. Press COMFORTSENSE button again to
turn off this function.
o stop or start louver movement and set the
desired up/down air flow direction. The louver
angle changes in 6 degree increments with each
press (not all models). By pressing for more than 2
seconds, the louver auto swing feature is activated.
Used to restore the current settings or resume
previous settings.
Push this button when remote controller is on,
the system will automatically revert back to the
previous settings including operating mode,
set temperature, fan speed level and sleep
feature (if activated).
By pressing for more than 2 seconds, the
system will automatically store the current
operation settings including operating mode,
set temperature, fan speed level and sleep
feature (if activated).
Note:
The SLEEP function is not
available in FAN or DRY mode.
C-SENSE
FAN
Loading ...
Loading ...
Loading ...