Loading ...
Loading ...
Loading ...
18
AXIS P3301/-V/AXIS P3304/-V - Video & Audio settings
Overlay Image
An overlay image is a static image superimposed over the video image. The overlay image can be used to provide extra
information, or to mask a part of the video image. See the online help for supported image formats and sizes.
To use your own image, e.g. a logo, it must first be uploaded to AXIS P3304. Click Browse and locate the image file on the
computer. Click Upload. When uploaded, the file can be selected in the Use overlay image drop-down list.
To place the overlay image in the live view image, select Include overlay image at coordinates under Video & Audio > Video
Stream > Image, see Overlay Settings, on page 14.
Privacy mask
Privacy masks are up to 3 configurable areas of solid color that allow concealment of parts of the image that are not to be
viewable. Privacy masks cannot even be bypassed via the VAPIX® Application Programming Interface (API).
Privacy Mask List - The Privacy Mask List shows all the masks that are currently configured in the AXIS P3301/-V/AXIS
P3304/-V
Network Camera and if they are enabled.
Add/Edit Mask - To define a new mask:
1. Click Add.
1. Place the rectangle over the desired area to conceal.
2. To resize, click and pull the bottom right-hand corner.
3. Choose a color for the box from the Privacy mask color drop-down list.
4. Enter a descriptive name in the Mask name field.
5. Click Save.
To edit a privacy mask, select it and reshape, move or change color as needed.
Audio Settings
This section describes how to configure the basic audio
settings for the network camera. The audio functionality is
enabled under Video & Audio > Video Stream > Audio.
Audio Channels
Audio mode:
Full duplex - Simultaneous two-way audio. Transmit and
receive audio (talk and listen) at the same time.
Note:
There is no echo cancellation; if there is echo, try moving the microphone or the speaker.
Half-duplex - Non-simultaneous two-way audio. Half-duplex mode sends and receives audio in both directions, but only in
one direction at a time, by pushing the Talk button. To speak, press and hold the button (check that the microphone is not
muted). To receive audio, release the button.
Note:
The push-to-talk button is configured from the Audio tab in AMC (see AXIS Media Control (AMC), on page 13). It is possi-
ble to configure the push-to-talk button so that it toggles between the speaking and listening modes.
Loading ...
Loading ...
Loading ...