Loading ...
Loading ...
Loading ...
4
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove the battery pack
any time the tool is not in use.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Only use accessories specically
recommended for this tool. Others
may be hazardous.
Attaching Feed Handle
1. Line up the anvil and slide the handle into place
on the desired side of the tool.
2. To remove, press the center button and pull the
handle away from the tool.
Do not use a wrench, pipe, or any other lever in place
of the feed handle.
Motor adjustment lever
The motor adjustment lever is used to raise and lower
the motor on the slide rail. Always hold the motor
securely before loosening the adjustment lever.
Installing the Cutting Fluid Bottle
1. Ensure the valve is in the o (sideways) position.
2. Fill the bottle with HAWG WASH
®
cutting uid.
3. Attach the bottle bracket to the drill.
4. Attach the hose to the tting on the side of the drill.
FUNCTIONAL DESCRIPTION
1. Slide rail
2. Carrying handle
3. Steel tie-o ring
(2788-20 only)
4. Feed handle
5. Battery bay
6. Magnet activation
knob
7. Speed selector
8. Motor adjustment lever
9. Cutting uid valve
10. Cutting uid bracket
11. Cutting uid bottle
12. ON(I) / OFF(O)
switch
13. Drill motor
14. Cutting uid tting
15. Quick-change arbor
16. Safety strap bracket
(strap not shown)
17. Magnetic base
18. LED button
1
3
4
2
5
6
7
8
14
13
9
11
10
12
15
1716
18
Loading ...
Loading ...
Loading ...