Loading ...
Loading ...
Loading ...
True-rms Digital Multimeters
Features
9
The mini-measurement display shows the measurement value of
the primary function, if it is not already shown in the page area of
the display. For example, when the display is frozen for a HOLD,
the mini-measurement display continues to show the input signal
(Live) measurement and a mini z. In addition, the mini-
measurement display will flash, if z (for inputs above 30 volts)
would normally appear in the primary display but is obscured. To
warn of the possibility of blowing a current fuse, the mini-
measurement display also flashes when current measurements
exceed the maximum continuous current levels (see
specifications).
Page Area
The page area of the display is where the main meter content is
displayed. The primary display (upper half of the page area) is
where the most important value of the selected function is
shown. The secondary display contains the bar graph and values
that may be measured in addition to the primary function value.
For example, with frequency measurement selected in Vac, the
frequency value will appear in the primary display with the ac
voltage value in the secondary display.
Softkey Labels
Labels for the four function softkeys (F1 through F4) appear in
the bottom row of the display. These labels will change based on
the function and/or menu selection.
Adjusting Display Contrast
When not selecting items on a menu or inputting data, pressing
7 increases display contrast and pressing 8 decreases it.
w ww . . co m
information@itm.com1.800.561.8187
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...