Loading ...
Loading ...
Loading ...
Anti-tip device
*INSTALLATION*
Do not carry or lift the range by the oven door handle or the control panel!
Checking the installation niche
Install the anti-tip device on a surface capable of bearing significant weight, such
as a concrete floor, concrete wall, or timber framing. The surface must be flat and
level.
If the rear of the Range has distance A to the supporting wall due to
unevenness or wall covering (e.g., tile level), you must install the anti-tip device
to the supporting floor. Alternatively, you can also install the anti-tip device with
an adapter between the supporting wall and the anti-tip device. The adapter
must compensate dimension A and be made of suitable material so that a
supporting connection is made between the wall and anti-tip device. Use
appropriate screws (length and diameter).
A
A = Distance between the rear of the Range and the supporting wall
97
Loading ...
Loading ...
Loading ...