User Guide
HP ENVY 6000 All-in-One series
HP company notices
THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE.
ALL RIGHTS RESERVED. REPRODUCTION, ADAPTATION, OR TRANSLATION OF THIS MATERIAL IS PROHIBITED WITHOUT PRIOR WRITTEN PERMISSION OF HP,
EXCEPT AS ALLOWED UNDER THE COPYRIGHT LAWS. THE ONLY WARRANTIES FOR HP PRODUCTS AND SERVICES ARE SET FORTH IN THE EXPRESS
WARRANTY STATEMENTS ACCOMPANYING SUCH PRODUCTS AND SERVICES. NOTHING HEREIN SHOULD BE CONSTRUED AS CONSTITUTING AN ADDITIONAL
WARRANTY. HP SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN.
© Copyright 2020 HP Development Company, L.P.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Mac, OS X, macOS, and AirPrint are trademarks of Apple Inc., registered in the U.S. and other countries.
ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency.
Android and Chromebook are trademarks of Google LLC.
Amazon and Kindle are trademarks of Amazon.com, Inc. or its aliates.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Safety information
Always follow basic safety precautions when using this product to reduce risk of injury from re or electric shock.
- Read and understand all instructions in the documentation that comes with the printer.
- Observe all warnings and instructions marked on the product.
- Unplug this product from wall outlets before cleaning.
- Do not install or use this product near water, or when you are wet.
- Install the product securely on a stable surface.
- Install the product in a protected location where no one can step on or trip over the line cord, and the line cord cannot be damaged.
- If the product does not operate normally, see Solve a problem on page 78.
- There are no user-serviceable parts inside. Refer servicing to qualied service personnel.
Table of contents
1 Printer parts ............................................................................................................................................................................................... 1
Printer overview ........................................................................................................................................................................ 2
Buttons ....................................................................................................................................................................................... 4
Print reports from control panel ............................................................................................................................................ 7
Edge lighting and status lights ............................................................................................................................................... 8
Quiet Mode .............................................................................................................................................................................. 13
Auto-O ................................................................................................................................................................................... 14
Sleep mode ............................................................................................................................................................................. 15
Adjust printer lights or volume ............................................................................................................................................ 16
2 Load media and paper basics ............................................................................................................................................................... 17
Load media .............................................................................................................................................................................. 18
Load original ........................................................................................................................................................................... 21
Change the default paper size detected by the printer ................................................................................................... 22
Paper basics ............................................................................................................................................................................ 23
3 Connect your printer .............................................................................................................................................................................. 24
Connect using the HP Smart app ......................................................................................................................................... 25
Connect to a wireless network with a router ..................................................................................................................... 26
Connect wirelessly without a router ................................................................................................................................... 28
Change the connection type ................................................................................................................................................. 32
Wireless settings .................................................................................................................................................................... 33
Advanced printer management tools (for wireless printers) .......................................................................................... 34
Tips for setting up and using a wireless printer ................................................................................................................ 35
4 Printer management tools ................................................................................................................................................................... 36
Use the HP Smart app to print, copy, scan, and troubleshoot ........................................................................................ 37
Open the HP printer software (Windows) .......................................................................................................................... 38
Toolbox (Windows) ................................................................................................................................................................. 39
Embedded web server .......................................................................................................................................................... 40
Update the printer .................................................................................................................................................................. 42
ENWW iii
5 Print .......................................................................................................................................................................................................... 43
Print using the HP Smart app ............................................................................................................................................... 44
Print from mobile devices ..................................................................................................................................................... 45
Print with Print Anywhere ..................................................................................................................................................... 46
Print using a computer .......................................................................................................................................................... 47
Tips for print success ............................................................................................................................................................. 52
6 Manage cartridges .................................................................................................................................................................................. 54
Information on cartridges and the printhead .................................................................................................................... 55
Check the estimated ink levels ............................................................................................................................................ 56
Order ink supplies .................................................................................................................................................................. 57
HP Instant Ink .......................................................................................................................................................................... 58
Replace the cartridges .......................................................................................................................................................... 59
Use single cartridge mode .................................................................................................................................................... 61
Cartridge warranty information ........................................................................................................................................... 62
Tips for working with cartridges .......................................................................................................................................... 63
7 Copy and scan ......................................................................................................................................................................................... 64
Copy and scan using HP Smart ............................................................................................................................................ 65
Copy from the printer ............................................................................................................................................................ 67
Scan .......................................................................................................................................................................................... 68
Tips for copy and scan success ............................................................................................................................................ 72
8 Web Services ........................................................................................................................................................................................... 73
What are Web Services? ........................................................................................................................................................ 74
Set up Web Services .............................................................................................................................................................. 75
Print with HP ePrint ................................................................................................................................................................ 46
Remove Web Services ........................................................................................................................................................... 77
9 Solve a problem ...................................................................................................................................................................................... 78
Get help from the HP Smart app ......................................................................................................................................... 79
Get help in this guide ............................................................................................................................................................. 80
Understand printer reports ................................................................................................................................................ 100
Solve problems using Web Services ................................................................................................................................. 102
Maintain the printer ............................................................................................................................................................. 103
Restore original factory defaults and settings ................................................................................................................ 105
HP support ............................................................................................................................................................................ 106
10 HP EcoSolutions (HP and the Environment) .................................................................................................................................. 108
Energy Save Mode ............................................................................................................................................................... 109
iv ENWW
Appendix A Technical information ........................................................................................................................................................ 110
HP Company notices ........................................................................................................................................................... 111
Specications ........................................................................................................................................................................ 112
Regulatory notices ............................................................................................................................................................... 114
Environmental product stewardship program ................................................................................................................ 120
Index ........................................................................................................................................................................................................... 128
ENWW v
vi ENWW
Printer overview
●
Top and front view
●
Back view
Top and front view
Feature Description
1 Scanner lid
2 Lid-backing
3 Output tray
4 Paper-width guides
5 Paper tray
6 Paper tray door
7 Ink cartridges
8 Control panel
9 Output tray extender (also referred to as the tray extender)
10 Cartridge access door
11 Scanner glass
2 Chapter 1 Printer parts ENWW
Back view
1 Power connection
2 Power button
3 USB port
4 Wi-Fi button
ENWW Printer overview 3
Buttons
●
Control panel buttons
●
Buttons on the back of the printer
●
Button combinations
Control panel buttons
Feature Description
1
(Wireless light): Lights blue. Indicates the status of the printer wireless connection. Lights up solid when
connected, blinks when not connected.
2
(Resume button): When it lights up, press to resume a job after a disruption (for example, after loading
paper or clearing a paper jam).
For more information, see Printer warning or error status on page 96.
3
(Start Copy Black): Lights white. Starts a black-and-white copy job. To increase the number of copies, press
the button multiple times.
4
(Number Counter indicator): Used to show copy count and error codes (lights white).
For more information, see Printer warning or error status on page 96.
5
(Start Copy Color): Lights colored, slowly changing color. Starts a color copy job. To increase the number of
copies, press the button multiple times.
4 Chapter 1 Printer parts ENWW
Feature Description
6
(Cancel button): When it lights up, press to stop the current operation.
7
(Information button): Prints out a printer information page on the current status.
● If it is blinking white, press to conrm a connection attempt from other devices.
● If it is amber (possibly blinking), it indicates an HP Instant Ink warning or error. Press the button to print an
information page, check the HP Instant Ink section for diagnostic results, and then follow the instructions on
the page.
NOTE: HP Instant Ink service might be available in all countries. To check availability, visit hpinstantink.com.
Buttons on the back of the printer
(Power connection)
Use only the power cord supplied by HP.
(Power button)
Press to turn the printer on or o.
(USB port)
Use a USB cable to connect the printer to other devices.
(Wi-Fi button)
● Press to turn on or o the printer wireless capabilities of connecting to a wireless network
with a router or an access point.
● Press and hold for at least three seconds to restore the network settings to default settings.
This will also put the printer back into the Auto Wireless Connect (AWC) setup mode. The
printer must be in the AWC setup mode to connect to the HP Smart app and your network. For
more information, see Connect using the HP Smart app on page 25.
Button combinations
Function Button combination Instruction
Wi-Fi Auto Wireless Connect (AWC) network
reset
Press and hold the Wi-Fi button for at least three seconds
to restore the network settings to default settings. This
will also put the printer back into the Auto Wireless
Connect (AWC) setup mode.
Enter Wi-Fi Protected Setup (WPS) Push Button
mode
+
Press and hold the Wi-Fi button and Power button on the
back of the printer for three seconds.
Enter Wi-Fi Protected Setup (WPS) PIN mode
and print a page with PIN code
+
Press and hold the Information button for at least three
seconds to light all the buttons, then press the
Information and Resume buttons at the same time for
ve seconds.
Turn Wi-Fi Direct on or o
+ +
Press and hold the Information button for at least three
seconds to light all the buttons, then press the
Information, Cancel and Resume buttons at the same
time.
ENWW Buttons 5
Function Button combination Instruction
Complete product reset A complete product reset will clear all your personal data,
settings, and network information from the printer.
With the cartridge access door open, press and hold the
Power button for at least ve seconds.
Restore factory defaults
+
Restoring the printer to factory defaults will remove all
settings and functions previously set up on the printer.
With the cartridge access door open, press and hold the
Wi-Fi and Power buttons for at least three seconds.
6 Chapter 1 Printer parts ENWW
Print reports from control panel
NOTE: Before printing reports, press and hold (the Information button) for at least three seconds to light
up all the buttons on the control panel, and then follow the instructions in the table.
Printer report How to print Description
Printer Information Page
Press .
For this report, do not hold the Information
button for three seconds rst.
Printer Information Page provides the summary information
about various aspects of the printer and their current
status.
The general status of Network, Wi-Fi Direct, Mobile Printing,
and HP Instant Ink is mainly included in this report.
Printer Status Report
Press and at the same time.
Printer Status Report provides the current printer
information, cartridge status, or recent events. It can also
help troubleshoot printer problems.
Wireless Network Test
Report and Network
Conguration Page
Press and at the same time.
Wireless Network Test Report shows the diagnostics results
for the status of the wireless network, wireless signal
strength, detected networks, and more.
Network Conguration Page shows the network status,
hostname, network name, and more.
Wireless Quick Start Guide
Press .
Wireless Quick Start Guide provides the step-by-step
instructions to help you set up the wireless connection.
Wi-Fi Direct Guide
Press and at the same time.
Wi-Fi Direct Guide provides the instructions to help you set
up and use Wi-Fi Direct.
Web Services Reports
Press .
Depending on Web Services status, Web Services Reports
provide dierent instructions to help you turn on Web
Services, set up Web Services, or x connection issues, and
more.
Print Quality Report To print the Print Quality Diagnostic Report:
● Embedded web server (EWS): Click the Tools tab, click
Print Quality Toolbox under Utilities, and then click the
Print Quality Report button.
● HP Smart app (Win10): In the Printer settings, click
Printer Reports, click Print Quality Diagnostics, and
then click Print.
ENWW Print reports from control panel 7
Edge lighting and status lights
●
Status lights overview
●
Edge lighting
Status lights overview
Feature Description
1 Edge lighting: Can glow blue, white, green, amber, or purple to show various printer statuses. For more
information, see the following section.
2 Paper tray light: The paper tray light blinks to the right of the control panel, on the side, above the edge of the
paper tray. When lit, it indicates media errors or warnings such as media size mismatch, paper width mismatch, or
paper length mismatch. For more information, see Printer warning or error status on page 96.
3 Cartridge access door light: The cartridge access door light is a curved strip of lighting in the top right corner. When
lit, it indicates an ink error.
Ink cartridge lights: The black and color ink cartridges have a light for each that blinks to indicate an error. Open the
door to investigate the issue. For more information, see Printer warning or error status on page 96.
Edge lighting
The printer Edge lighting consists of a large light bar across the front of the printer. These lights communicate
printer states with color and movement.
Table
1-1 Edge lighting - purple
Light behavior Description
The light bar glows purple from the middle outward, repeating. The printer is in Wi-Fi setup mode, waiting for the HP Smart app or
HP printer software to connect. This lighting pattern means your
printer is beaconing and ready to be found for setup.
Complete setup using the HP Smart app or HP printer software. The
printer will stay in Wi-Fi setup mode for two hours. To reset Wi-Fi
setup mode, press the Wi-Fi button on the back of the printer.
8 Chapter 1 Printer parts ENWW
Table 1-1 Edge lighting - purple (continued)
Light behavior Description
The light bar glows purple in the center. Printer is connecting to the HP Smart app and this state persists
until network credentials are passed to the printer. After three
minutes with no activity, the printer will return to the waiting state.
The outside edges of the light bar pulse purple, repeating. The printer is connected to a wireless network and WPS Push
Button mode is in progress.
Amber ashes in the center with two persistent purple light bars at
the outside edges.
An error occurred during WPS Push Button mode.
Table 1-2 Edge lighting - amber
Light behavior Description
Amber glows across the large light bar. There is a warning or printer blocking error. For more information on
amber Edge lighting, causes, and solutions, see Printer warning or
error status on page 96. When the printer exits the error state, the
amber light will transition to green in the center.
The light bar glows amber towards the edges, and then transitions
to green.
The printer is restored to factory defaults and will automatically
restart after it is done.
ENWW Edge lighting and status lights 9
Table 1-2 Edge lighting - amber (continued)
Light behavior Description
The light bar fast blinks amber. There is a serious printer error. All LEDs on the printer fast blink.
Turn the printer o and then on again to resolve the issue.
Three quick amber ashes in the center of the light bar. Currently disabled button is pressed.
Table 1-3 Edge lighting - blue
Light behavior Description
The light bar pulses blue towards the center, ends with one small
light bar glowing blue.
Wi-Fi Direct is on by default for your printer. It can also be turned on
again by pressing buttons from the control panel.
TIP: To turn on Wi-Fi Direct from the printer control panel, press
and hold until all the buttons light up, and then press
, , and at the same time.
The light bar pulses blue towards the center, ends with a small light
bar glowing amber in the center.
Wi-Fi Direct is turned o by pressing buttons from the control
panel.
TIP: To turn o Wi-Fi Direct from the printer control panel, press
and hold until all the buttons light up, and then press
, , and at the same time.
The light bar glows blue and moves towards the edges, pulses
amber in the center.
The printer has either lost Wi-Fi connection, or there is a connection
error during setup.
10 Chapter 1 Printer parts ENWW
Table 1-3 Edge lighting - blue (continued)
Light behavior Description
The light bar blinks blue and amber quickly three times in the
center.
The number of Wi-Fi Direct connections has reached the maximum
of ve devices. To use Wi-Fi Direct from other devices, you must
disconnect currently connected devices.
The light bar pulses blue from the center, ends with light bar
gl
owing green, repeating.
The printer is identifying itself, when triggered by an iOS device
thr
ough Printer Settings.
Table
1-4 Edge lighting - white
Light behavior Description
The light bar glows blue-white in the center.
The printer is idle and connected to a wireless network.
The c
omputer or HP Smart app is directly connected to
the printer using Wi-Fi Direct.
ENWW Edge lighting and status lights 11
Table 1-4 Edge lighting - white (continued)
Light behavior Description
The light bar pulses white and moves outwards. Bar stays lit during printing. The printer is processing and printing a print job.
The light bar pulses white in the center, repeating. The printer is processing a scan job.
Table 1-5 Edge lighting - green
Light behavior Description
Green glows across the light bar, then transitions into other
relevant lighting pattern (setup, idle, so on). Green glow appears
and fades out when powering o.
The printer is powering on or o. Do not unplug the power cord
until the printer is turned on or o.
Green pulses in the center of the light bar. The printer is updating rmware or is in update mode. One of the
following might occur:
● The printer is downloading an update.
● An update is in progress.
● There is an update error. The printer will restart and try to
update later.
NOTE: The printer must be on during the process of updating. Do
not unplug the power cord before the update is complete.
12 Chapter 1 Printer parts ENWW
Quiet Mode
Quiet Mode slows down printing to reduce overall noise without aecting print quality. Quiet Mode only works for
printing with Better print quality on plain paper. To reduce printing noise, turn on Quiet Mode. To print at normal
speed, turn Quiet Mode o. Quiet Mode is o by default.
NOTE: In Quiet Mode, if you print on plain paper with the Draft or Best print quality, or if you print photos or
envelopes, the printer works in the same way as when Quiet Mode is o.
To turn Quiet Mode on or o from an Android or iOS device
1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 37.
2. Tap the printer image on the Home screen.
3. Tap Quiet Mode, and then change the setting.
To turn Quiet Mode on or o from the embedded web server (EWS)
1. Open the EWS. For more information, see Open the embedded web server on page 34.
2. Click the Settings tab.
3. In the Preferences section, select Quiet Mode, and then select On or O.
4. Click Apply.
ENWW Quiet Mode 13
Auto-O
This feature turns the printer o after 2 hours of inactivity to help reduce energy use. Auto-O turns the printer
o completely, so you must use the Power button to turn the printer back on. If your printer supports this
energy-saving feature, Auto-O is automatically enabled or disabled depending on printer capabilities and
connection options. Even when Auto-O is disabled, the printer enters Energy Save Mode on page 109 after 5
minutes of inactivity to help reduce energy use.
● Auto-O is always enabled if the printer does not have network or fax capability.
● Auto-O is disabled when a printer’s wireless or Wi-Fi Direct capability is turned on or when a printer with
fax, USB, or Ethernet network capability establishes a fax, USB, or Ethernet network connection.
14 Chapter 1 Printer parts ENWW
Sleep mode
Power usage is reduced while in Sleep mode. After initial setup of printer, the printer will enter Sleep mode after
ve minutes of inactivity. Use the HP Smart app to change the period of inactivity before the printer sleeps by
selecting Advanced Settings. You can also change this setting using the printer’s embedded web server by
completing the following steps.
To change the time to Sleep mode
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 34.
2. Click the Settings tab.
3. In the Power Management section, click Energy Save Mode, and select the desired option.
NOTE: If prompted for a password, enter the PIN from the label on your printer. It might be near the
cartridge access area inside the printer or on the back, side, or bottom of the printer.
4. Click Apply.
ENWW Sleep mode 15
Adjust printer lights or volume
You can adjust the brightness of the printer lights or the volume of the sound eects according to your
environment and needs.
To adjust printer lights or volume from an Android or iOS device
1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 37.
2. Tap the printer image on the Home screen.
3. Find and change the settings from Preferences.
16 Chapter 1 Printer parts ENWW
Load media
To load paper
1. Open the paper tray.
2
. Slide the paper-width guides to the edges of the paper tray.
3. Insert a stack of full-size or photo paper into the middle of the paper tray with the short edge oriented
towards the printer. For photo paper, make sure the side to be printed on is facing down. Then slide the
stack of paper in until it stops.
18 Chapter 2 Load media and paper basics ENWW
4. Slide the paper-width guides to the left and right edges of the full-size or photo paper until they stop at
both edges.
5. Close the paper tray.
To load envelopes
1. Open the paper tray.
2. Slide the paper-width guides to the edges of the paper tray.
ENWW Load media 19
3. Insert one or more envelopes into the middle of the paper tray and slide the stack of envelopes in until it
stops. The side to be printed on should face down in the printer.
4. Slide the paper-width guides to the left and right edges of the stack of envelopes until they stop at both
edges.
5. Close the paper tray.
20 Chapter 2 Load media and paper basics ENWW
Load original
To load original on the scanner glass
1. Lift the scanner lid.
2. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
3. Close the scanner lid.
ENWW Load original 21
Change the default paper size detected by the printer
The printer can automatically detect whether the paper tray has paper loaded and detect whether the loaded
paper is large, small, or medium width. You can change the default large, medium, or small paper size detected
by the printer.
To change the default paper size detected by the printer from an Android or iOS device
1. Open the HP Smart app.
2. Tap the printer image on the Home screen.
3. Find and change the settings from Preferences.
To change the default paper size detected by the printer from the embedded web server (EWS)
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 34.
2. Click the Settings tab.
3. In the Preferences section, click Tray and Paper Management, and then select the desired option.
4. Click Apply.
22 Chapter 2 Load media and paper basics ENWW
Paper basics
The printer is designed to work well with most types of oce paper. It is best to test a variety of print paper types
before buying large quantities. Use HP paper for optimum print quality. Visit the HP website at www.hp.com for
more information about HP paper.
HP recommends plain papers with the ColorLok logo for printing everyday documents. All
papers with the ColorLok logo are independently tested to meet high standards of reliability
and print quality, and produce documents with crisp, vivid color, bolder blacks, and that dry
faster than ordinary plain papers. Look for papers with the ColorLok logo in a variety of
weights and sizes from major paper manufacturers.
ENWW Paper basics 23
3 Connect your printer
●
Connect using the HP Smart app
●
Connect to a wireless network with a router
●
Connect wirelessly without a router
●
Change the connection type
●
Wireless settings
●
Advanced printer management tools (for wireless printers)
●
Tips for setting up and using a wireless printer
24 Chapter 3 Connect your printer ENWW
Connect using the HP Smart app
To set up using the HP Smart app
You can use the HP Smart app to set up the printer on your wireless network. The HP Smart app is supported on
iOS, Android, Windows, and macOS devices. For information about this app, see Use the HP Smart app to print,
copy, scan, and troubleshoot on page 37.
1. Make sure your computer or mobile device is connected to your wireless network and you know the Wi-Fi
password of your wireless network.
2. If you are using an iOS or Android mobile device, make sure that Bluetooth is turned on. (HP Smart uses
Bluetooth to make the setup process faster and easier on iOS and Android mobile devices.)
NOTE: HP Smart uses Bluetooth for printer setup only. Printing using Bluetooth is not supported.
3. Make sure the printer is in the Auto Wireless Connect (AWC) setup mode.
When the printer is in the AWC setup mode, the Edge lighting will glow purple, pulsing from the middle
outward, repeating.
If this is the rst time you set up the printer, the printer is ready for setup and in AWC mode immediately
after it is powered on. The printer will keep searching for the HP Smart app to connect within two hours,
and then stops searching.
If it has been longer than two hours, press and hold the Wireless button on the back of the printer for
at least three seconds to put the printer back in AWC setup mode.
4. Open the HP Smart app, and then do one of the following:
● iOS/Android: On the home screen, tap the Plus icon ( ) and then select the printer. If the printer is
not in the list, tap Add Printer. Follow the onscreen instructions to add the printer to your network.
● Windows and macOS: On the home screen, tap the Plus icon and select the printer. If the printer is not
found, click or tap Set up a new printer. Follow the onscreen instructions to add the printer to your
network.
ENWW Connect using the HP Smart app 25
Connect to a wireless network with a router
TIP: To print the Wireless Quick Start Guide, press and hold until all the buttons on the control panel light
up, and then press again.
●
Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
●
Connect your printer to a wireless network using HP printer software
Connect your printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before you can connect your printer to a wireless network using WPS, make sure you have the following:
● A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point.
NOTE: The printer only supports connections using 2.4 GHz or 5 GHz.
● A computer connected to the wireless network that you intend to connect the printer to. Be sure you have
installed the HP printer software on the computer.
If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your
router has a push button, follow the PIN method.
To use the Push Button Conguration (PBC) method
1.
Press and hold and on the back of printer for at least three seconds to start WPS Push Button
method.
The Edge lighting shows the outside edges of the light bar pulsing purple, repeating.
2. Press the WPS button on your router.
NOTE: The product begins a timer for approximately two minutes while a wireless connection is established.
If the printer connects successfully, the Edge lighting glows purple at the outside edges of the light bar. Flashing
amber lighting in the middle of the light bar indicates an error.
26 Chapter 3 Connect your printer ENWW
To use the PIN method
1. Press and hold until all the buttons on the control panel light up, and then press and hold and
for at least ve seconds to start WPS PIN method and print a page with a PIN code.
The Edge lighting shows the light bar glowing purple near the edges.
2. Open the conguration utility or software for the wireless router or wireless access point, and then enter
the WPS PIN.
NOTE: For more information about using the conguration utility, see the documentation provided with
the router or wireless access point.
Wait for about two minutes. If the printer connects successfully, the light bar glows white in the center.
Connect your printer to a wireless network using HP printer software
To connect the printer to an integrated wireless WLAN 802.11 network, you will need the following:
● A wireless 802.11b/g/n network that includes a wireless router or access point.
NOTE: The printer only supports connections using 2.4 GHz or 5 GHz.
● A computer connected to the wireless network that you intend to connect the printer to.
● Network name (SSID).
● WEP key or WPA Passphrase (if needed).
To connect your printer using HP printer software (Windows and macOS)
1. Depending on whether you have installed the HP printer software or not, do one of the following:
If you have not installed the HP printer software on your computer
a. Visit 123.hp.com to download and install the printer software.
b. Follow the onscreen instructions.
If you have the HP printer software installed on your computer
a. Open the printer software. For more information, see Open the HP printer software (Windows)
on page 38.
b. In the printer software, click Tools.
c. Click Device Setup & Software.
d. Click Connect a new device, and then follow the onscreen instructions.
2. After the printer connects successfully, the large light bar of the Edge lighting glows light blue in the center.
ENWW Connect to a wireless network with a router 27
Connect wirelessly without a router
With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable
device—without connecting to an existing wireless network.
Guidelines for using Wi-Fi Direct
● Make sure your computer or mobile device has the necessary software.
– If you are using a computer, make sure you have installed the HP printer software.
If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct rst and
then install the printer software. Select Wireless when prompted by the printer software for a
connection type.
– If you are using a mobile device, make sure you have installed a compatible printing app. For more
information, visit the HP Mobile Printing website at www.hp.com/go/mobileprinting. If a local version
of this website is not available in your country/region or language, you might be directed to the HP
Mobile Printing website in another country/region or language.
● Make sure Wi-Fi Direct for your printer is turned on.
● Up to ve computers and mobile devices can use the same Wi-Fi Direct connection.
● Wi-Fi Direct can be used regardless of whether the printer is connected to a network using a wireless
connection or not.
● Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.
To turn Wi-Fi Direct on or o from the control panel
▲ On the printer control panel, press and hold until all the buttons light up, and then press ,
, and at the same time.
● When Wi-Fi Direct is turned on, blue light travels from the edges to the center of the light bar.
● When Wi-Fi Direct is turned o, blue light travels from the edges to the center of the light bar, ending
with an amber glow.
28 Chapter 3 Connect your printer ENWW
NOTE: If the printer is in the AWC setup mode, you will not able to turn Wi-Fi Direct on or o from the control
panel. You can either wait until the AWC setup has been completed or press Wireless button on the back of
the printer to exit the AWC setup mode.
TIP: The Wi-Fi Direct guide provides instructions about how to use Wi-Fi Direct. To print the guide, press and
hold until all the buttons light up, and then press and together. The guide may not be
available in all languages.
To turn Wi-Fi Direct on or o from an Android or iOS device
1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 37.
2. Tap the printer icon, and then nd and tap Advanced Settings.
3. Follow the on-screen instructions to connect to the printer Embedded Web Server.
4. In the Embedded Web Server, tap Network > Wi-Fi Direct > Status > Edit Settings.
5. Select the option to turn Wi-Fi Direct on or o, and then tap Apply.
TIP: You can change the Wi-Fi Direct connection security setting for the printer here.
Wi-Fi Direct connection security setting
● If the Wi-Fi Direct connection security for the printer is set to Manual (the default setting), you need to do
one of the following to connect to the printer on your mobile device or computer.
– If (the Information button) is blinking white, press it within 30 seconds.
– If the printer prints out a page with a PIN code, follow the instruction on the page.
TIP:
● You can also turn on Wi-Fi Direct or change the Wi-Fi Direct connection security setting from the EWS. For
more information about using the EWS, see Open the embedded web server on page 34.
● To nd the Wi-Fi Direct name and password, press (the Information button) to print a printer
information page.
● Edge lighting shows Wi-Fi Direct status. For more information, see Edge lighting on page 8.
ENWW Connect wirelessly without a router 29
To print from a wireless-capable mobile device that supports Wi-Fi Direct
Make sure you have installed the latest version of HP Print Service Plugin on your mobile device (if using an
Android device). You can download this plugin from the Google Play application store.
1. Make sure you have turned on Wi-Fi Direct on the printer.
2. Turn on Wi-Fi Direct on your mobile device. For more information, see the documentation provided with the
mobile device.
3. From your mobile device, select a document from a print enabled application, and then select the option to
print the document.
The list of available printers appears.
4. From the list of available printers, choose the Wi-Fi Direct name shown such as DIRECT-**-HP ENVY 6000
series (where ** are the unique characters to identify your printer).
Enter the Wi-Fi Direct password when prompted.
5. Print your document.
To print from a wireless-capable mobile device that does not support Wi-Fi Direct
Make sure you have installed a compatible printing app on your mobile device. For more information, visit the HP
Mobile Printing website at www.hp.com/go/mobileprinting. If a local version of this website is not available in
your country/region or language, you might be directed to the HP Mobile Printing website in another country/
region or language.
1. Make sure you have turned on Wi-Fi Direct on the printer.
2. Turn on the Wi-Fi connection on your mobile device. For more information, see the documentation
provided with the mobile device.
NOTE: If your mobile device does not support Wi-Fi, you are not able to use Wi-Fi Direct.
3. From the mobile device, connect to a new network. Use the process you normally use to connect to a new
wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless networks shown such
as DIRECT-**-HP ENVY 6000 series (where ** are the unique characters to identify your printer).
Enter the Wi-Fi Direct password when prompted.
4. Print your document.
To print from a wireless-capable computer (Windows)
1. Make sure you have turned on Wi-Fi Direct on the printer.
2. Turn on the computer's Wi-Fi connection. For more information, see the documentation provided with the
computer.
NOTE: If your computer does not support Wi-Fi, you are not able to use Wi-Fi Direct.
30 Chapter 3 Connect your printer ENWW
3. From the computer, connect to a new network. Use the process you normally use to connect to a new
wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless networks shown such
as DIRECT-**-HP ENVY 6000 series (where ** are the unique characters to identify your printer).
Enter the Wi-Fi Direct password when prompted.
4. Print your document.
ENWW Connect wirelessly without a router 31
Change the connection type
If you rst set up your printer and installed the software with a USB cable, directly connecting the printer to your
computer, you can easily change to a wireless network connection. You will need a wireless 802.11a/b/g/n
network that includes a wireless router or access point.
NOTE: The printer supports connections using 2.4GHz or 5GHz .
Before changing from a USB connection to a wireless network, make sure that:
● The printer is connected to your computer with the USB cable until you are prompted to disconnect the
cable.
● The computer is connected to the wireless network that you intend to install the printer on.
You can also change from a wireless connection to a USB connection.
To change from a USB connection to a wireless network (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
2. In the printer software, click Tools.
3. Click Device Setup & Software, and then select Connect a new device.
4. Follow the on-screen instructions.
To change from a USB connect to a wireless network using the HP Smart app (Windows 10/macOS)
1. Open the HP Smart app. For information about how to open the app on a Windows 10 computer, see Use
the HP Smart app to print, copy, scan, and troubleshoot on page 37.
2. Make sure your printer is selected.
TIP:
If you want to select a dierent printer, click the ( ) on the toolbar at the left side of the screen,
and then select a dierent printer from the list of all available printers.
3. Click Learn More when you see “Make printing easier by connecting your printer wirelessly” on top of the
home page of the app.
To change from a wireless connection to a USB connection (Windows/macOS)
▲ Connect the printer and the computer with a USB cable. The USB port is at the back of the printer.
32 Chapter 3 Connect your printer ENWW
Wireless settings
You can set up and manage your printer wireless connection. This includes printing information about network
settings, turning the wireless function on or o, and restoring wireless settings.
To turn on or o the wireless capability of the printer
Press Wireless button on the back of the printer to turn on or o the printer wireless capabilities.
● If the printer has an active connection to a wireless network, the large bar of the Edge lighting glows light
blue in the center.
● If wireless is turned o, the large light bar of the Edge lighting glows white in the center.
● For more information about the wireless status, see Edge lighting on page 8.
To restore network settings to default settings
● Press and hold Wireless button on the back of the printer for at least three seconds. Then the printer
enters the Auto Wireless Connect (AWC) setup mode. It keeps searching and waiting for the HP Smart app
to connect within about two hours, and then stops searching.
To change wireless settings (Windows)
This method is available if you have already installed the printer software.
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
2. In the printer software, click Tools.
3. Click Device Setup & Software.
4. Select Recongure Wireless Settings. Follow the onscreen instructions.
ENWW Wireless settings 33
Advanced printer management tools (for wireless printers)
When the printer is connected to a network, you can use the embedded web server (EWS) to view status
information, change settings, and manage the printer from your computer.
NOTE: You can open and use the EWS without being connected to the Internet. However, some features are
not available.
NOTE: To view or change some settings, you might need a password.
●
Open the embedded web server
Open the embedded web server
You can use one of the following ways to open the embedded web server.
To open the embedded web server through a network
1.
From the printer control panel, press and hold (the Information button) until all the buttons light up,
and then press and at the same time to print the wireless network test report and network
conguration page.
2. Find out the IP address or hostname of the printer from the network conguration page.
3. In a supported web browser on your computer, type the IP address or hostname assigned to the printer.
For example, if the IP address is 192.168.0.12, type the following address into a web browser: https://
192.168.0.12.
To open the embedded web server from HP Smart (Windows and macOS)
To open the embedded web server from HP Smart:
1. Click on the printer image.
2. Click Advanced Settings.
To open the embedded web server through Wi-Fi Direct
1. Make sure Wi-Fi Direct is turned on. For more information, see Connect wirelessly without a router
on page 28.
2. From your wireless computer, turn wireless on, then search for and connect to the Wi-Fi Direct name, for
example: DIRECT-**-HP ENVY 6000 series. Enter the Wi-Fi Direct password when prompted.
3. In a supported web browser on your computer, type the following address: https://
192.168.223.1.
For information about cookies, see Embedded web server on page 40.
34 Chapter 3 Connect your printer ENWW
Tips for setting up and using a wireless printer
Use the following tips to set up and use a wireless printer:
● When setting up the wireless networked printer using a computer, make sure:
– Your wireless router or access point is powered on.
– You computer is connected to a wireless network (not using an Ethernet cable).
– The printer is in the AWC setup mode.
The printer searches for wireless routers, then lists the detected network names on the computer.
● If your computer or mobile device is connected to a Virtual Private Network (VPN), you need to disconnect
from the VPN before you can access any other device on your network, including the printer.
● Learn more about conguring your network and the printer for wireless printing. Click here to go online for
more information.
● Learn how to nd your network security settings. Click here to go online for more information.
● Learn about the HP Print and Scan Doctor. Click here to go online for more information.
NOTE: This utility is only available for Windows operating system.
● Use the HP online rewall troubleshooter to determine if a rewall or antivirus program is preventing your
computer from connecting to the printer and nd resolutions.
ENWW Tips for setting up and using a wireless printer 35
Use the HP Smart app to print, copy, scan, and troubleshoot
HP Smart helps you to set up, copy, scan, print, share, and manage your HP printer. You can share documents
and images through email, text messages, and popular cloud and social media services (such as iCloud, Google
Drive, Dropbox, and Facebook). You can also set up new HP printers, as well as monitor and order supplies.
NOTE: The HP Smart app might not be available in all languages. Some features might not be available with all
printer models.
To install the HP Smart app
▲ The HP Smart app is supported on iOS, Android, Windows 10, and macOS devices. To install the app on your
device, go to 123.hp.com and follow the onscreen instructions to access your device’s app store.
To open the HP Smart app on a Windows 10 computer
▲ After installing the HP Smart app, from the device desktop, click Start, and then select HP Smart from the
app list.
Connect to your printer
▲ Make sure that your device is connected to the same network as the printer. Then HP Smart will
automatically detect the printer.
Get more information about the HP Smart app
For basic instructions on how to print, copy, scan, and troubleshoot using HP Smart, see Print using the HP Smart
app on page 44, Copy and scan on page 64 and Get help from the HP Smart app on page 79.
For more information about using HP Smart for printing, copying, scanning, accessing printer features, and
troubleshooting issues, go to:
● iOS/Android: www.hp.com/go/hpsmart-help
● Windows 10: www.hp.com/go/hpsmartwin-help
● macOS: www.hp.com/go/hpsmartmac-help
ENWW Use the HP Smart app to print, copy, scan, and troubleshoot 37
Open the HP printer software (Windows)
After installing the HP printer software, double-click the printer icon on the desktop or do one of the following to
open the printer software:
● Windows 10: From the computer desktop, click Start, select HP from the app list, and then select the icon
with the printer name.
● Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the
printer, and then select the icon with the printer name.
NOTE: If you have not installed the HP printer software, visit 123.hp.com to download and install the necessary
software.
38 Chapter 4 Printer management tools ENWW
Toolbox (Windows)
The Toolbox provides maintenance information about the printer.
NOTE: The Toolbox can be installed along with the HP printer software if the computer meets the system
requirements. For information about system requirements, see Specications on page 112.
To open the Toolbox
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
2. Click Print & Scan .
3. Click Maintain Your Printer.
ENWW Toolbox (Windows) 39
Embedded web server
When the printer is connected to a network, you can use the printer's embedded web server (EWS) to view status
information, change settings, and manage it from your computer.
NOTE: For your security, some settings in the EWS are password-protected. If prompted for a password, enter
the PIN from the label on your printer. It might be near the cartridge access area inside the printer or on the back,
side, or bottom of the printer.
NOTE: You can open and use the embedded web server without being connected to the Internet. However,
some features are not available.
●
About cookies
●
Embedded web server cannot be opened
About cookies
The embedded Web server (EWS) places very small text les (cookies) on your hard drive when you are
browsing. These les let the EWS recognize your computer the next time you visit. For example, if you have
congured the EWS language, a cookie helps remember which language you have selected so that the next time
you access the EWS, the pages are displayed in that language. Some cookies (such as the cookie that stores
customer-specic preferences) are stored on the computer until you clear them manually.
You can congure your browser to accept all cookies, or you can congure it to alert you every time a cookie is
oered, which allows you to decide which cookies to accept or refuse. You can also use your browser to remove
unwanted cookies.
Depending on your printer, if you disable cookies, you also disable one or more of the following features:
● Using some setup wizards
● Remembering the EWS browser language setting
● Personalizing the EWS Home page
For information about how to change your privacy and cookie settings and how to view or delete cookies, see
the documentation available with your Web browser.
Embedded web server cannot be opened
Check your network setup
● Make sure you are not using a phone cord or a crossover cable to connect the printer to the network.
● Make sure the network cable is securely connected to the printer.
● Make sure the network hub, switch, or router is turned on and working correctly.
Check the computer
● Make sure the computer that you are using is connected to the same network as the printer.
40 Chapter 4 Printer management tools ENWW
Check your web browser
● Make sure the web browser meets the minimum system requirements. For information about system
requirements, see Specications on page 112.
● If your web browser uses any proxy settings to connect to the Internet, try turning o these settings. For
more information, see the documentation available with your web browser.
● Make sure JavaScript and cookies are enabled in your web browser. For more information, see the
documentation available with your web browser.
Check the printer IP address
● Make sure the printer IP address is correct.
To verify the printer IP address:
– Press and hold (the Information button) for three seconds until all the control panel buttons are
lit.
– Press (the Information button) and (the Resume button) at the same time to print the
Network Conguration Report.
● Make sure the printer IP address is valid. The printer IP address should have the similar format as the
router IP address. For example, the router IP address might be 192.168.0.1 or 10.0.0.1 and the printer IP
address is 192.168.0.5 or 10.0.0.5.
If the printer IP address is similar to 169.254.XXX.XXX or 0.0.0.0, it is not connected to the network.
TIP: If you are using a computer running Windows, you can visit the HP online support website at
www.support.hp.com . This website provides information and utilities that can help you correct many common
printer problems.
ENWW Embedded web server 41
Update the printer
By default, if the printer is connected to a network and Web Services has been enabled, the printer automatically
checks for updates.
To enable the printer to automatically check for updates
1. When HP Web Services are enabled during printer setup, the printer will automatically be enrolled to check
for updates.
2. To turn auto-updates o, turn o Web Services rst.
To update the printer using the embedded web server
1. Open the EWS.
For more information, see Open the embedded web server on page 34.
2. Click the Tools tab.
3. In the Printer Updates section, click Firmware Updates, and then follow the onscreen instructions.
NOTE: If prompted for a password, enter the PIN from the label on your printer. It might be near the cartridge
access area inside the printer or on the back, side, or bottom of the printer.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions
to set up a proxy server. If you do not have the details, contact your network administrator or the person who set
up the network.
NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts.
42 Chapter 4 Printer management tools ENWW
5 Print
Most print settings are automatically handled by the software application. Change the settings manually only
when you want to change print quality, print on specic types of paper, or use special features.
This section contains the following topics:
●
Print using the HP Smart app
●
Print from mobile devices
●
Print with Print Anywhere
●
Print using a computer
●
Tips for print success
ENWW 43
Print using the HP Smart app
This section provides basic instructions for using the HP Smart app to print from your Android, iOS, Windows 10
or macOS device. For more information about using the HP Smart app, go to:
● iOS/Android: www.hp.com/go/hpsmart-help
● Windows 10: www.hp.com/go/hpsmartwin-help
● macOS: www.hp.com/go/hpsmartmac-help
To print from an Android or iOS device
1. Make sure you have loaded paper in the input tray. For more information, see Load media on page 18.
2. Open the HP Smart app.
3. Tap the Plus icon if you need to change to a dierent printer, or add a new printer.
4. Tap a printing option (for example, Print Photos or Print Documents). You can print photos and documents
from your device, cloud storage, or social media sites.
5. Select the photo or document you want to print.
6. Select the appropriate options. To view more settings, click or tap More settings. For more information
about printing settings, see Printer settings tips on page 52.
7. Tap Print.
To print from a Windows 10 device
1. Make sure you have loaded paper in the input tray. For more information, see Load media on page 18.
2. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 37.
3. On the HP Smart Home screen, make sure your printer is selected.
TIP:
If you want to select a dierent printer, click or tap the icon on the toolbar at the left side of the
screen, and then select a dierent printer from the list of all available printers.
4. Select Print Photos, locate a photo you want to print, and then click or tap Select Photos to Print.
Select Print Documents, locate a document you want to print, and then click or tap Print.
5. Select the appropriate options. To view more settings, click or tap More settings. For more information
about printing settings, see Printer settings tips on page 52.
6. Click or tap Print to begin printing.
44 Chapter 5 Print ENWW
Print from mobile devices
You can print documents and photos directly from your mobile devices, including iOS, Android, Windows Mobile,
Chromebook and Amazon Kindle Fire.
NOTE: You can also use the HP Smart app to print from mobile devices. For more information, see Print using
the HP Smart app on page 44.
To print from mobile devices
1. Make sure your printer is connected to the same network as your mobile device.
TIP: If you want to print without connecting to a router, use Wi-Fi Direct to print from a mobile device. For
more information, see Connect wirelessly without a router on page 28.
2. Enable printing on your mobile device:
● iOS: Use the Print option from the Share menu or .
NOTE: Devices running iOS 4.2 or later have AirPrint preinstalled.
● Android: Download the HP Print Service Plugin (supported by most Android devices) from the Google
Play Store and enable it on your device.
● Windows Mobile: Tap Print from the Device menu.
NOTE: If your printer is not listed, you might need to do a one-time setup of the printer using the
Add Printer wizard.
● Chromebook: Download and install the HP Print for Chrome app from the Chrome Web Store to
enable Wi-Fi printing.
● Amazon Kindle Fire HD9 and HDX: The rst time you select Print on your device, the HP Print Service
Plugin is automatically downloaded to enable mobile printing.
NOTE: For detailed information about enabling printing from your mobile devices, visit the HP Mobile
Printing website ( www.hp.com/go/mobileprinting ). If a local version of this website is not available in your
country/region or language, you might be directed to the HP Mobile Printing website in another country/
region or language.
3. Make sure the loaded paper matches the paper settings of the printer (see Load media on page 18 for
more information). Accurately setting the paper size for the paper that is loaded enables your mobile
device to know what paper size it is printing.
ENWW Print from mobile devices 45
Print with Print Anywhere
Print Anywhere is a free service from HP that allows you to use the HP Smart app with your HP Account to print
remotely using cellular data or a remote Wi-Fi connection.
With Print Anywhere, you can print to your HP web-connected printer anytime, from any location. Click here to go
online for more information.
Before you can use Print Anywhere, make sure the printer is connected to an active network providing Internet
access.
To print a document using HP ePrint
1. If you created an HP Account during printer setup (might not be available in all countries/regions), HP ePrint
was automatically enabled.
If you did not create an HP Account during setup, follow the steps below for your operating system to
enable HP ePrint .
iOS/Android
a. From the HP Smart app home screen, tap your printer.
b. Tap Enable Print Anywhere.
c. Sign in or create an HP Account when prompted.
d. Tap Enable.
Windows 10/macOS
a. From the HP Smart app home screen, click the printer image.
b. On the Print Anywhere tab, click Sign In.
c. Sign in or create an HP Account when prompted.
d. Click Enable.
2. Open HP Smart, and then print your document. For more information, see Print using the HP Smart app
on page 44.
NOTE: If you want to use HP ePrint capabilities from multiple devices, you need to sign in with your HP Account
on each of the additional devices. After signing in, the new device will be ready to print with HP ePrint .
46 Chapter 5 Print ENWW
Print using a computer
●
Print documents
●
Print photos
●
Print envelopes
●
Print on both sides (duplexing)
●
Print using the maximum dpi
●
Print using a Mac desktop or laptop
Print documents
Before printing documents, make sure you have paper loaded in the paper tray and the output tray is open. For
more information about loading paper, see Load media on page 18.
To print a document (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
● On the Layout tab, select Portrait or Landscape orientation.
● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray
Selection area, select the appropriate print quality in the Quality Settings area, and then select the
appropriate color in the Color area.
● Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
NOTE: If you change the paper size, make sure that you have loaded the correct paper in the paper
tray.
For more printing tips, see Printer settings tips on page 52.
5. Click OK to close the Properties dialog box.
6. Click Print or OK to begin printing.
To print on both sides of the page (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
ENWW Print using a computer 47
4. Select the appropriate options.
● On the Layout tab, select Portrait or Landscape orientation, and then select an appropriate ipping
paper option from the Print on Both Sides Manually drop-down list.
● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray
Selection area, select the appropriate print quality in the Quality Settings area, and then select the
appropriate color in the Color area.
● Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
NOTE: If you change the paper size, make sure that you have loaded the correct paper in the paper
tray.
For more printing tips, see Printer settings tips on page 52.
5. After all of the odd numbered pages have printed, remove the document from the output tray.
Flip the document by the long edge or short edge according to the option you set at the previous step.
Reload the document. Make sure the blank side of the document is facing out from the printer.
6. Press (the Resume button) to print the other side of the document.
Print photos
Before printing photos, make sure you have photo paper loaded in the paper tray and the output tray is open.
For more information about loading paper, see Load media on page 18.
To print a photo on photo paper (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
● On the Layout tab, select Portrait or Landscape orientation.
● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray
Selection area, select the appropriate print quality in the Quality Settings area, and then select the
appropriate color in the Color area.
● Click Advanced to select the appropriate photo size from the Paper Size drop-down list.
NOTE: If you change the paper size, make sure that you have loaded the correct paper in the paper
tray.
For more printing tips, see Printer settings tips on page 52.
5. Click OK to return to the Properties dialog box.
6. Click OK, and then click Print or OK in the Print dialog box.
48 Chapter 5 Print ENWW
NOTE: After the printing is nished, remove unused photo paper from the paper tray. Store the photo paper so
it does not start to curl, which could reduce the quality of your printout.
Print envelopes
Before printing envelopes, make sure you have envelopes loaded in the paper tray and the output tray is open.
You can load one or more envelopes into the paper tray. Do not use shiny or embossed envelopes or envelopes
that have clasps or windows. For more information about loading envelopes, see Load media on page 18.
NOTE: For specic details on how to format text for printing on envelopes, consult the help les in your word
application.
To print an envelope (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
● On the Layout tab, select Portrait or Landscape orientation.
● On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray
Selection area, select the appropriate print quality in the Quality Settings area, and then select the
appropriate color in the Color area.
● Click Advanced to select the appropriate envelope size from the Paper Size drop-down list.
For more printing tips, see Printer settings tips on page 52.
5. Click OK, and then click Print or OK in the Print dialog box.
Print on both sides (duplexing)
To print on both sides of the paper (Windows)
1. Load paper in the paper tray. For more information, see Load media on page 18.
2. From your software, select Print.
3. Make sure your printer is selected.
4. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
NOTE: To set print settings for all print jobs, make the changes in the HP printer software provided with
the printer. For more information on the HP printer software, see Printer management tools on page 36.
ENWW Print using a computer 49
5. On the Printing Shortcuts or Printing Shortcut tab, select a shortcut which supports the Print On Both Sides
setting. Select an option from the Print On Both Sides drop-down list.
To change other print settings, click the other tabs.
For more printing tips, see Printer settings tips on page 52.
NOTE: If you change the paper size, be sure to load the correct paper in the paper tray and set the paper
size on the printer control panel.
6. Click OK to close the Properties dialog box.
7. Click Print or OK to begin printing.
Print using the maximum dpi
Use maximum dots per inch (dpi) to print high-quality, sharp images on photo paper. Printing in maximum dpi
takes longer than printing with other settings and requires a large amount of disk space. For a list of supported
print resolutions, visit the product support website at www.support.hp.com.
To print in maximum dpi mode (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
● Click Paper/Quality tab. From the Media drop-down list, select the appropriate paper type.
● Click the Advanced tab, select the Print in Max DPI checkbox, and then click OK.
NOTE: Not all paper types support maximum dpi. You will see an alert icon beside the option if the
selected paper type in the Media drop-down list does not support it.
For more printing tips, see Printer settings tips on page 52.
5. Conrm the paper orientation on the Layout tab, and then click OK to print.
Print using a Mac desktop or laptop
The printer is compatible with Mac computers running macOS or OS X 10.7 and later and Apple AirPrint. Follow
the instructions in this section to enable printing from a Mac computer using AirPrint.
NOTE: Use the HP Smart app to monitor ink levels and printer alerts.
If you have not set up the printer and connected it to your network, rst go to 123.hp.com to install the
necessary software and complete setup.
Once the printer is set up and connected to your wireless network, follow the steps below to enable printing with
AirPrint.
50 Chapter 5 Print ENWW
1. Open System Preferences and select Printers and Scanners.
2. Click the Plus icon to add the printer.
3. Choose your printer from the displayed list of network printers, and then click Add.
The computer installs the available drivers (print, scan, and fax, if applicable) for your printer.
ENWW Print using a computer 51
Tips for print success
●
Ink tips
●
Paper loading tips
●
Printer settings tips
To print successfully, the HP cartridges should be functioning properly with sucient ink, the paper should be
loaded correctly, and the printer should have the appropriate settings.
Ink tips
● Use original HP cartridges.
● Install both the black and tri-color cartridges correctly.
For more information, see Replace the cartridges on page 59.
● Check the estimated ink levels in the cartridges to make sure there is sucient ink.
For more information, see Check the estimated ink levels on page 56.
● If the print quality is not acceptable, see Fix print quality issues on page 92 for more information.
NOTE: Original HP cartridges are designed and tested with HP printers and papers to help you easily produce
great results, time after time.
HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result
of using a non-HP supply will not be covered under warranty.
If you see a 'Non-HP Cartridge' message displayed from the printer software and you believe you purchased
original HP cartridges, go to: www.hp.com/go/anticounterfeit .
Paper loading tips
● Load a stack of paper (not just one page). All of the paper in the stack should be in the same size and type
to avoid a paper jam.
● Load the paper with the side to be printed on facing up.
● Make sure that paper loaded in the paper tray lays at, and the edges are not bent or torn.
● Adjust the paper-width guides in the paper tray to t snugly against all paper. Make sure the paper-width
guides do not bend the paper in the paper tray.
For more information, see Load media on page 18.
Printer settings tips
Printer settings tips (Windows)
● To change default print settings, open the HP printer software, click Print & Scan , and then click Set
Preferences. For information how to open the printer software, see Open the HP printer software
(Windows) on page 38.
● To understand paper and paper tray settings:
52 Chapter 5 Print ENWW
– Paper Size: Select the paper size you loaded in the paper tray.
– Paper Type or Media: Select the paper type you are using.
● To understand color or black and white settings:
– Color: Uses ink from all cartridges for full color prints.
– Black & White or Black Ink Only: Uses the black ink only for normal or lower quality black and white
prints.
– High Quality Grayscale: Uses ink from both the color and black cartridges to produce a wider range of
black and grey tones for high quality black and white prints.
● To understand print quality settings:
The print quality is measured in print resolution dots per inch (dpi). Higher dpi produces clearer and more
detailed prints, but slows print speed and might use more ink.
– Draft: Lowest dpi typically used when ink levels are low or when high quality prints are not needed.
– Normal: Suitable for most print jobs.
–
Best: Better dpi than Better.
– Max DPI Enabled: Highest dpi setting available for print quality.
● To understand page and layout settings:
– Orientation: Select Portrait for vertical prints or Landscape for horizontal prints.
– Print on Both Sides: Manually ip the pages after one side of the paper prints out so that you can print
on both sides of the paper.
○ Flip on Long Edge: Select it if you want to ip pages by the long edge of the paper when printing
on both sides of the paper.
○ Flip on Short Edge: Select it if you want to ip pages by the short edge of the paper when
printing on both sides of the paper.
– Pages per Sheet: Helps you specify the order of the pages if you print the document with more than
two pages per sheet.
ENWW Tips for print success 53
Information on cartridges and the printhead
The following tips help maintain HP cartridges and ensure consistent print quality.
● The instructions in this guide are for replacing cartridges, and are not intended for rst time installation.
● Keep all cartridges in the original sealed packages until they are needed.
● Be sure to turn o the printer properly.
● Store cartridges at room temperature (15-35° C or 59-95° F).
● Do not clean the printhead unnecessarily. This wastes ink and shortens the life of the cartridges.
● Handle cartridges carefully. Dropping, jarring, or rough handling during installation can cause temporary
printing problems.
● If you are transporting the printer, do the following to prevent ink leaking from the printer or other damage
from occurring to the printer:
● Make sure you turn o the printer by pressing (the Power button). Wait until all sounds of
internal motion stop before unplugging the printer.
● Make sure you leave the cartridges installed.
● The printer must be transported sitting at; it should not be placed on its side, back, front, or top.
ENWW Information on cartridges and the printhead 55
Check the estimated ink levels
You can check the estimated ink levels from the printer software, printer control panel or HP Smart.
To check the ink levels from the printer software (Windows)
1. Open the HP printer software.
2. In the printer software, click Estimated Levels.
To check the ink levels from HP Smart
▲ Open HP Smart on your mobile device. The estimated ink levels for your printer appear at the top of the
screen, beside the picture of the printer.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When an indicator
shows low-ink levels, consider having a replacement ink cartridge available to avoid possible printing delays. You
do not need to replace ink cartridges until print quality becomes unacceptable.
NOTE: If you have installed a relled or remanufactured cartridge, or a cartridge that has been used in another
printer, the ink level indicator might be inaccurate or unavailable.
NOTE: Ink from the cartridges is used in the printing process in a number of dierent ways, including in the
initialization process, which prepares the printer and cartridges for printing, and in printhead servicing, which
keeps print nozzles clear and ink owing smoothly. In addition, some residual ink is left in the cartridge after it is
used. For more information, see www.hp.com/go/inkusage .
56 Chapter 6 Manage cartridges ENWW
Order ink supplies
Before ordering cartridges, locate the correct cartridge number.
To locate the cartridge number on the printer
● The cartridge number is located inside the cartridge access door.
To locate the cartridge number from the HP Smart app
● Open HP Smart. On the Home screen, click or tap the printer image, and then click or tap Supported
Supplies or Supply Status.
To order original HP supplies for the printer, go to www.hp.com/buy/supplies . If prompted, choose your country/
region, and then follow the prompts to nd the right cartridges for your printer.
NOTE: Ordering cartridges online is not supported in all countries/regions. If it is not available in your country/
region, you may still view supplies information and print a list for reference when shopping at a local HP reseller.
ENWW Order ink supplies 57
HP Instant Ink
Your printer is eligible for the HP Instant Ink replacement service, which can reduce your printing costs and save
you time. After you enroll in the service, your printer automatically keeps track of your ink levels and orders
more ink for you when the ink is running low. HP ships the new cartridges straight to your door before your ink
runs out, so you'll always have ink on hand when you need it. Additionally, the cartridges that you receive contain
more ink than HP XL cartridges, so you'll need to replace cartridges less frequently. To learn more about how HP
Instant Ink can save you time and money, go to hpinstantink.com.
NOTE: HP Instant Ink service might be available in all countries. To check availability, visit hpinstantink.com.
58 Chapter 6 Manage cartridges ENWW
Replace the cartridges
NOTE: For information on recycling used ink supplies, see HP inkjet supplies recycling program on page 122.
NOTE: At this time, some portions of the HP website are available in English only.
NOTE: Not all cartridges are available in all countries/regions.
To replace the cartridges
1. Check that power is on.
2. Remove the old cartridge.
a. Open the cartridge access door.
b. Open the latch on the cartridge slot. And then remove the cartridge from the slot.
3. Insert a new cartridge.
a. Remove the cartridge from packaging.
ENWW Replace the cartridges 59
b. Remove plastic tape using the pull tab.
NOTE: Do not touch the electrical contacts on the cartridge.
c. Slide the new cartridge in the slot and close the latch until it clicks.
4. Close the cartridge access door.
NOTE: The HP printer software prompts you to align the ink cartridges when you print a document after
installing a new ink cartridge.
60 Chapter 6 Manage cartridges ENWW
Use single cartridge mode
Use the single cartridge mode to operate the printer with only one cartridge. The single cartridge mode is
initiated when one of the following occurs.
● There is only one cartridge installed in the carriage.
● A cartridge is removed from the carriage if there are two cartridges installed previously.
NOTE: If the printer enters the single cartridge mode when two cartridges are installed in the printer,
verify that the protective piece of plastic tape has been removed from each cartridge. When the plastic tape
covers the cartridge contacts, the printer cannot detect that the cartridge is installed. If there is no plastic
tape on the cartridges, try cleaning the cartridge contacts. For information about cleaning cartridge
contacts, see Ink cartridge issues on page 87.
To exit the single cartridge mode
● Install both the black and tri-color cartridges in the printer.
ENWW Use single cartridge mode 61
Cartridge warranty information
The HP cartridge warranty is applicable when the cartridge is used in its designated HP printing device. This
warranty does not cover HP cartridges that have been relled, remanufactured, refurbished, misused, or
tampered with.
During the warranty period, the cartridge is covered as long as the HP ink is not depleted and the end of
warranty date has not been reached. The end of warranty date, in YYYY/MM/DD format, may be found on the
cartridge as indicated:
For a copy of the HP Limited Warranty Statement, visit www.hp.com/go/orderdocuments.
62 Chapter 6 Manage cartridges ENWW
Tips for working with cartridges
Use the following tips to work with cartridges:
● To protect the cartridges from drying out, always turn the printer o using the Power button.
● Do not open or untape cartridges until you are ready to install them. Leaving tape on the cartridges
reduces ink evaporation.
● Insert the cartridges into the correct slots. Match the color of each cartridge to the color of the cartridge
latch. Make sure the cartridges snap into place.
● Align the printer for best print quality. See Printing issues on page 89 for more information.
● When the Estimated Cartridge Levels screen in the HP Smart app or the Estimated Levels screen in the
printer software shows one or both cartridges in a low state, consider getting replacement cartridges to
avoid possible printing delays. You do not need to replace the cartridges until print quality becomes
unacceptable. See Replace the cartridges on page 59 for more information.
● If you remove a cartridge from the printer for any reason, try to replace it again as soon as possible. If a
cartridge is left unprotected outside the printer, its nozzles might dry out and clog up.
● Cartridges can be left in the printer for extended periods of time. However, to assure optimal cartridge
health, be sure to turn o the printer properly when the printer is not in use.
● Press (the Power button) to turn o the printer. Wait until the power light turns o before unplugging
the power cord or turning o a power strip.
CAUTION: If you incorrectly turn the printer o, the print carriage might not return to the correct position,
causing problems with the cartridges and print quality issues.
ENWW Tips for working with cartridges 63
Copy and scan using HP Smart
You can use the HP Smart app to copy and scan documents or photos using your device camera. HP Smart
includes editing tools that allow you to adjust the scanned image before saving, sharing, or printing. You can
print, save your scans locally or in cloud storage, and share them via email, SMS, Facebook, Instagram, etc. To
copy and scan with HP Smart, follow the instructions provided in the appropriate section below, depending on
the type of device you are using.
This section provides basic instructions for using the HP Smart app to copy or scan from your Android, iOS,
Windows 10 or macOS device. For more information about using the HP Smart app, go to:
● iOS/Android: www.hp.com/go/hpsmart-help
● Windows 10: www.hp.com/go/hpsmartwin-help
● macOS: www.hp.com/go/hpsmartmac-help
●
Copy and scan from an Android or iOS device
●
Scan from a Windows 10 device
Copy and scan from an Android or iOS device
To copy from an Android or iOS device
1. Open the HP Smart app.
2. Tap the Plus icon if you need to change to a dierent printer, or add a new printer.
3. Tap Copy. The built-in camera will open.
4. Put a document or photo in front of the camera, select a size option to help identifying the size of the
original, and then tap the round button at the bottom of the screen to take a picture.
TIP: For the best result, adjust the camera position to place the original within the provided frame on the
preview screen.
5. Set the number of copies or make other adjustments if necessary:
● Tap the Add Pages icon to add more documents or photos.
● Tap the Delete icon to remove documents or photos.
● Tap Resize to adjust how to ll the original to the paper.
6. Tap Start Black or Start Color to make a copy.
To scan from an Android or iOS device
1. Open the HP Smart app.
2. Tap the Plus icon if you need to change to a dierent printer, or add a new printer.
3. Select Camera Scan. The built-in camera will open. Scan your photo or document using the camera.
4. When you have nished adjusting the scanned document or photo, save, share, or print it.
ENWW Copy and scan using HP Smart 65
Scan from a Windows 10 device
To scan a document or photo using the device camera
If your device has a camera, you can use the HP Smart app to scan a printed document or photo with the device
camera. You can then use HP Smart to edit, save, print or share the image.
1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 37.
2. Select Scan, and then select Camera.
3. Put a document or photo in front of the camera, and then click or tap the round button at the bottom of the
screen to take an image.
4. Adjust boundaries if needed. Click or tap the Apply icon.
5. Make other adjustments if necessary:
● Click or tap Add Pages to add more documents or photos.
● Click or tap Edit to rotate or crop the document or image, or adjust its contrast, brightness, saturation,
or angle.
6. Select the le type you want, and then click or tap the Save icon to save it or click or tap the Share icon to
share it with others.
To edit a previously scanned document or photo
HP Smart provides editing tools, such as crop or rotate, so that you can use to adjust a previously scanned
document or photo on your device.
1. Open HP Smart. For more information, see Use the HP Smart app to print, copy, scan, and troubleshoot
on page 37.
2. Select Scan, and then select Import.
3. Select the document or photo that you want to adjust, and then click or tap Open.
4. Adjust boundaries if needed. Click or tap the Apply icon.
5. Make other adjustments if necessary:
● Click or tap Add Pages to add more documents or photos.
● Click or tap Edit to rotate or crop the document or image, or adjust its contrast, brightness, saturation,
or angle.
6. Select the le type you want, and then click or tap Save or Share to save the le or share it with others.
66 Chapter 7 Copy and scan ENWW
Copy from the printer
The Copy button on the printer display allows you to easily select number of copies and color or black and white
for copying on plain paper.
From the scanner glass
1. Load paper in the paper tray.
For information about how to load paper, see Load media on page 18.
2. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
For more information, see Load original on page 21.
3.
Press either the Start Copy Black button ( ) or the Start Copy Color button ( ) to make a copy.
Copying will start two seconds after the last button press.
TIP: You can increase the number of copies by pressing the button multiple times.
ENWW Copy from the printer 67
Scan
You can scan documents, photos, and other paper types, and send them to a variety of destinations, such as a
computer or an email recipient.
●
Scan using HP printer software
●
Scan using Webscan
Scan using HP printer software
●
Scan to a computer
●
Scan to email
●
Create a new scan shortcut (Windows)
●
Change scan settings (Windows)
Scan to a computer
Before scanning to a computer, make sure you have already installed the HP recommended printer software.
The printer and computer must be connected and turned on.
In addition, on Windows computers, the printer software must be running prior to scanning.
To enable the scan to a computer feature (Windows)
If the printer is connected to the computer with a USB connection, the feature for scanning to computer is
enabled by default and cannot be disabled.
If you are using a network connection, follow these instructions if the feature has been disabled, and you wish to
enable it again.
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
2. Go to the Scan section.
3. Select Manage Scan to Computer.
4. Click Enable.
To scan an original from HP printer software (Windows)
1. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
3. In the printer software, under Print & Scan , click Scan , and then click Scan a Document or Photo .
4. Under Scan Shortcuts, select the type of scan you want, and then click Scan .
68 Chapter 7 Copy and scan ENWW
NOTE: The initial screen allows you to review and modify basic settings. Click the More link at the top
right corner of the Scan dialog to review and modify detailed settings.
For more information, see Change scan settings (Windows) on page 70.
Scan to email
To scan a document or photo to email from HP printer software (Windows)
1. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
3. In the printer software, under Print & Scan , click Scan , and then click Scan a Document or Photo .
4. Under Scan Shortcuts, select Email as PDF or Email as JPEG , and then click Scan .
NOTE: The initial screen allows you to review and modify basic settings. Click the More link at the top
right corner of the Scan dialog to review and modify detailed settings.
For more information, see Change scan settings (Windows) on page 70.
If Show Viewer After Scan is selected, you can make adjustments to the scanned image in the preview
screen.
Create a new scan shortcut (Windows)
You can create your own scan shortcut to make scanning easier. For example, you might want to regularly scan
and save photos in PNG format, rather than JPEG.
1. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
3. In the printer software, under Print & Scan , click Scan , and then click Scan a Document or Photo .
4. Click Create New Scan Shortcut .
5. Enter a descriptive name, choose an existing shortcut on which to base your new shortcut, and then click
Create .
For example, if you are creating a new shortcut for photos, choose either Save as JPEG or Email as JPEG .
This makes available the options for working with graphics when scanning.
6. Change the settings for your new shortcut to meet your needs, and then click the save icon to the right of
the shortcut.
NOTE: The initial screen allows you to review and modify basic settings. Click the More link at the top
right corner of the Scan dialog to review and modify detailed settings.
For more information, see Change scan settings (Windows) on page 70.
ENWW Scan 69
Change scan settings (Windows)
You can modify any of the scan settings either for a singular use or save the changes to use permanently. These
settings include options such as page size and orientation, scan resolution, contrast, and the folder location for
saved scans.
1. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
3. In the printer software, under Print & Scan , click Scan , and then click Scan a Document or Photo .
4. Click the More link in the top right corner of the HP Scan dialog.
The detailed settings pane appears on the right. The left column summarizes the current settings for each
section. The right column allows you to change the settings in the highlighted section.
5. Click each section at the left of the detailed settings pane to review the settings in that section.
You can review and change most settings using drop-down menus.
Some settings allow greater exibility by displaying a new pane. These are indicated by a + (plus sign) at
the right of the setting. You must either accept or cancel any changes on this pane to return to the detailed
settings pane.
6. When you have nished changing settings, do one of the following.
● Click Scan . You are prompted to save or reject the changes to the shortcut after the scan is nished.
● Click the save icon to the right of the shortcut. It saves the changes into the shortcut so that you can
reuse them. Otherwise, the changes only aect the current scan. Then click Scan .
Learn more about using the HP Scan software. Click here to go online for more information. At this time, this
website might not be available in all languages.
● Customize scan settings, such as image le type, scan resolution, and contrast levels.
● Scan to network folders and cloud drives.
● Preview and adjust images before scanning.
Scan using Webscan
Webscan is a feature of the embedded web server that lets you scan photos and documents from your printer to
your computer using a web browser.
This feature is available even if you did not install the printer software on your computer.
For more information, see Open the embedded web server on page 34.
NOTE: By default, Webscan is o. You can enable this feature from the EWS.
If you are unable to open Webscan in the EWS, your network administrator might have turned it o. For more
information, contact your network administrator or the person who set up your network.
70 Chapter 7 Copy and scan ENWW
To enable Webscan
1. Open the embedded web server. For more information, see Open the embedded web server on page 34.
2. Click the Settings tab.
3. In the Security section, click Administrator Settings.
4. Select Webscan from EWS to enable Webscan.
5. Click Apply.
To scan using Webscan
Scanning using Webscan oers basic scan options. For additional scan options or functionality, scan from the HP
printer software.
1. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
2. Open the embedded web server. For more information, see Open the embedded web server on page 34.
3. Click the Scan tab.
4. Click Webscan in the left pane, change any settings, and then click Start Scan .
ENWW Scan 71
Tips for copy and scan success
Use the following tips to copy and scan successfully:
● Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the glass as part
of the image.
● Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
● To make a large copy of a small original, scan the original into the computer, resize the image in the
scanning software, and then print a copy of the enlarged image.
● If you want to adjust scan size, output type, scan resolution, or le type, and so on, start scan from the
printer software.
● To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the software.
● If you want to scan a document with several pages into one le instead of multiple les, start the scan with
the printer software or app.
72 Chapter 7 Copy and scan ENWW
What are Web Services?
The printer oers innovative, web-enabled solutions that can help you quickly access the Internet, obtain
documents, and print them faster and with less hassle—and all without using a computer.
NOTE: To use these web features, the printer must be connected to the Internet. You cannot use these web
features if the printer is connected using a USB cable.
HP ePrint
● HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anytime, from
any location. It's as simple as sending an email to the email address assigned to your printer when you
enable Web Services on the printer. No special drivers or software are needed. If you can send an email,
you can print from anywhere, using HP ePrint .
NOTE: Use your HP Account (might not be available in all countries/regions), to sign in and congure the
HP ePrint settings.
Once you have signed up for an account on www.hpsmart.com, you can sign in to view your HP ePrint job
status, manage your HP ePrint printer queue, control who can use your printer's HP ePrint email address to
print, and get help for HP ePrint .
74 Chapter 8 Web Services ENWW
Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet.
To set up Web Services, use one of the following methods.
To set up Web Services using the printer control panel
1. Print the Web Services Report by holding the Information button for three seconds until all buttons are lit.
Press the Resume button.
2. The page will contain instructions on setting up HP Web Services.
To set up Web Services using the embedded web server
1. Open the EWS. For more information, see Open the embedded web server on page 34.
2. Click the Web Services tab.
3. In the Web Services Settings section, click Setup , click Continue, and follow the onscreen instructions to
accept the terms of use.
4. If prompted, choose to allow the printer to check for and install printer updates.
NOTE: When updates are available, they are automatically downloaded and installed, and then the printer
restarts.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the instructions
on the information page to nish the setup.
To set up Web Services using the HP printer software (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
2. In the window that appears, double-click Print & Scan and then select Connect Printer to the Web under
Print. The printer's home page (embedded web server) opens.
3. On the Web Services tab, click Continue, and follow the onscreen instructions to accept the terms of use.
4. If prompted, choose to allow the printer to check for and install printer updates.
NOTE: When updates are available, they are automatically downloaded and installed, and then the printer
restarts.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen
instructions to set up a proxy server. If you do not have the details, contact your network administrator or
the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the instructions
on the information page to nish the setup.
ENWW Set up Web Services 75
Print with HP ePrint
HP ePrint allows you to print to your HP ePrint-enabled printer anytime, from any location.
Before you can use HP ePrint, make sure the printer is connected to an active network providing Internet access.
To print a document using HP ePrint
1. Make sure you have set up Web Services.
For more information, see Set up Web Services on page 75.
2. To obtain the email address for your printer:
a.
Press and hold (the Information button) for three seconds until all the control panel buttons are
lit.
b.
Press (the Resume button) to print a Web Services information page, and then nd the email
address for your printer from the page.
3. Email your document to the printer.
a. On your computer or mobile device, open your email application.
NOTE: For information about using the email application on your computer or mobile device, see
the documentation provided with the application.
b. Create a new email and attach the document to print.
c. Send the email to the printer email address.
The printer prints the attached document.
NOTE:
● Enter only the HP ePrint email address in the "To" eld. Do not enter any additional email addresses in
the other elds. The HP ePrint server does not accept email print jobs if there are multiple addresses
in the "To" eld or any address in the "Cc" eld."
● The email will be printed once it is received. As with any email, there is no guarantee when or whether
it will be received. You can check the print status on HP Smart website (might not be available in all
countries/regions).
● Documents printed with HP ePrint may appear dierent from the original. Style, formatting, and text
ow may dier from the original document. For documents that need to be printed with a higher
quality (such as legal documents), we recommend that you print from the software application on
your computer, where you will have more control over what your printout looks like.
76 Chapter 8 Web Services ENWW
Remove Web Services
Use the following instructions to remove Web Services.
To remove Web Services using the embedded web server
1. Open the EWS. For more information, see Open the embedded web server on page 34.
2. Click the Web Services tab, and then click Remove Web Services in the Web Services Settings section.
3. Click Remove Web Services.
4. Click Yes to remove Web Services from your printer.
ENWW Remove Web Services 77
Get help from the HP Smart app
The HP Smart app provides alerts for printer issues (jams and other problems), links to help content, and options
to contact support for additional assistance.
ENWW Get help from the HP Smart app 79
Get help in this guide
This section contains the following topics:
●
Jams and paper-feed issues
●
Ink cartridge issues
●
Printing issues
●
Network and connection issues
●
Printer hardware issues
●
Printer warning or error status
Jams and paper-feed issues
●
Clear a paper jam
●
Learn how to avoid paper jams
●
Solve paper-feed problems
Clear a paper jam
NOTE: Paper jams can occur in several areas. Clear paper jam from the paper tray rst. It helps to clear the
paper path and make clearing jams from other areas easier. Then continue to the next area until all paper jams
are located and cleared.
To clear a paper jam from the paper tray
1. Remove all the paper from the paper tray, including both loose and jammed paper.
2. Use a ashlight to check for any jammed paper or foreign objects in the paper path and remove them.
To avoid tearing any whole sheets of paper, gently pull the paper with both hands.
3. Press (the Cancel button). The printer tries to clear the jam automatically.
To clear a paper jam from the output tray
1. Remove all the paper from the output tray, including both loose and jammed paper.
80 Chapter 9 Solve a problem ENWW
2. Use a ashlight to check for any jammed paper or foreign objects in the paper path and remove them.
To avoid tearing any whole sheets of paper, gently pull the paper with both hands.
To clear a paper jam from the cartridge access area
1.
Press (the Cancel button) to try to clear the jam automatically. If this does not work, complete the
following steps to clear the jam manually.
2. Open the cartridge access door.
3. Wait until the carriage stops moving.
4. Press to turn o the printer. Then disconnect the power cord from the rear of the printer.
CAUTION: To avoid the risk of electrical shock, you must unplug the power cord to move the carriage by
hand.
5. Use a ashlight to check for any jammed paper or foreign objects in the cartridge access area and remove
them.
To avoid tearing any whole sheets of paper, gently pull the paper with both hands.
ENWW Get help in this guide 81
6. Remove the paper path cover.
7. If the carriage is in the center of the printer, slide it to the right, and then remove any paper or objects
blocking the carriage path.
8. Close the cartridge access door.
9. Reconnect the power cord to the rear of the printer to turn it on.
To clear an internal paper jam
CAUTION: Avoid pulling jammed paper from the front of the printer. Instead follow the steps below to clear the
jam. Pulling out jammed paper from the front of the printer might cause the paper to tear and leave torn pieces
inside the printer; this could result in more jams later.
1. Check the paper path inside the printer.
82 Chapter 9 Solve a problem ENWW
a. Open the cartridge access door.
b. Remove the paper path cover.
c. Lift the duplexer cover up and remove jammed paper.
ENWW Get help in this guide 83
d. Reinsert the paper path cover. Make sure it snaps into place.
e. Close the cartridge access door.
f. Touch on the control panel to continue the current job.
2. If the problem is not resolved, check the print carriage area inside the printer.
CAUTION: During the process, avoid touching the cable attached to the print carriage.
a. Open the cartridge access door.
84 Chapter 9 Solve a problem ENWW
b. If there is any jammed paper, move the print carriage to the far right of the printer, grasp the jammed
paper with both hands, and then pull it towards you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and wheels
for torn pieces of paper that might be remaining inside the printer.
If you do not remove all the pieces of paper from the printer, more paper jams are likely to occur.
c. Move the carriage to the far left of the printer, and do the same as in the previous step to remove any
torn pieces of paper.
d. Close the cartridge access door.
e. Touch on the control panel to continue the current job.
3. If the problem is still not resolved, check the tray area.
a. Pull out the paper tray to extend it.
ENWW Get help in this guide 85
b. Carefully turn the printer on its side to expose the bottom of the printer.
c. Check the gap in the printer where the paper tray was. If there is any jammed paper, reach into the
gap, grasp the paper with both hands and pull it towards you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and wheels
for torn pieces of paper that might be remaining inside the printer.
If you do not remove all of the pieces of paper from the printer, more paper jams are likely to occur.
d. Carefully turn the printer up again.
e. Push the paper tray back in.
f. Touch on the control panel to continue the current job.
Learn how to avoid paper jams
To help avoid paper jams, follow these guidelines.
● Remove printed papers from the output tray frequently.
● Make sure that you are printing with paper that is not wrinkled, folded, or damaged.
● Prevent curled or wrinkled paper by storing all unused paper at in a resealable bag.
86 Chapter 9 Solve a problem ENWW
● Do not use paper that is too thick or too thin for the printer.
● Make sure that the trays are loaded correctly and are not too full. For more information, see Load media
on page 18.
● Ensure that paper loaded in the paper tray lays at and the edges are not bent or torn.
● Do not combine dierent paper types and paper sizes in the paper tray; the entire stack of paper in the
paper tray must be the same size and type.
● Adjust the paper-width guides in the paper tray to t snugly against all paper. Make sure the paper-width
guides do not bend the paper in the paper tray.
● Do not force paper too far inside the paper tray.
● If you are printing on both sides of a page, do not print highly saturated images on light weight paper.
● If the printer is about to run out of paper, allow the printer to run out of paper rst, and then add paper. Do
not load paper when the printer is printing.
Solve paper-feed problems
What kind of problem are you having?
● Paper is not picked up from the paper tray
– Make sure paper is loaded in the paper tray. For more information, see Load media on page 18.
– Adjust the paper-width guides in the paper tray to t snugly against all paper. Make sure the paper-
width guides do not bend the paper in the paper tray.
– Make sure paper in the paper tray is not curled. Uncurl paper by bending it in the opposite direction of
the curl.
● Pages are skewing
– Make sure the paper is loaded in the middle of the paper tray and the paper-width guides are t
against the left and right sides of the paper.
– Load paper into the printer only when it is not printing.
● Multiple pages are being picked up
– Adjust the paper-width guides in the paper tray to t snugly against all paper. Make sure the paper-
width guides do not bend the paper in the paper tray.
– Make sure the paper tray is not overloaded with paper.
– Make sure the pieces of the loaded paper are not sticking together.
– Use HP paper for optimum performance and eciency.
Ink cartridge issues
●
Identify whether a cartridge has a problem
●
Fix cartridge problems
ENWW Get help in this guide 87
Identify whether a cartridge has a problem
If a cartridge has a problem, you might get a cartridge problem message from the printer software or the HP
Smart app, or the Cartridge access door lights up.
To identify whether a specic cartridge has a problem, open the cartridge access door, and then check the ink
cartridge light. If it lights up or is blinking, the corresponded cartridge has an issue. For more information on
cause and solution, see Printer warning or error status on page 96.
Fix cartridge problems
If an error occurs after a cartridge is installed, or if a message indicates a cartridge problem, try removing the
cartridges, verifying the protective piece of plastic tape has been removed from each cartridge, and then
reinserting the cartridges. If this does not work, clean the cartridge contacts. If the problem is still not resolved,
replace the cartridges. For information about replacing cartridges, see Replace the cartridges on page 59.
To clean cartridge contacts
CAUTION: The cleaning procedure should take only a few minutes. Make sure that the cartridges are reinstalled
in the printer as soon as possible. It is not recommended to leave the cartridges outside the printer longer than
30 minutes. If cartridges are left unprotected outside the printer, their nozzles might dry out and clog up.
1. Check that power is on.
2. Open the cartridge access door.
3. Wait until the carriage stops moving.
4. Remove the cartridge indicated in the error message.
5. Clean the cartridge contacts and printer contacts.
88 Chapter 9 Solve a problem ENWW
a. Hold the cartridge by its sides with the bottom pointing up and locate the electrical contacts on the
cartridge.
The electrical contacts are the small gold-colored dots on the cartridge.
b. Wipe only the contacts with a dry swab or lint-free cloth.
CAUTION: Be careful to wipe only the contacts, and do not smear any of the ink or other debris
elsewhere on the cartridge.
c. On the inside of the printer, locate the contacts for the cartridge.
The printer contacts are the set of gold-colored bumps positioned to meet the contacts on the
cartridge.
d. Use a dry swab or lint-free cloth to wipe the contacts.
6. Reinstall the cartridge.
7. Close the Cartridge access door.
8. Check if the error message has gone away. If you still receive the error message, turn the printer o, and
then on.
NOTE: If one cartridge is causing problems, you can remove it and use the single cartridge mode to operate the
printer with only one cartridge.
Printing issues
What do you want to do?
●
Fix problems with page not printing (unable to print)
●
Fix print quality issues
ENWW Get help in this guide 89
Fix problems with page not printing (unable to print)
To resolve print issues (Windows)
Make sure that the printer is turned on and that there is paper in the paper tray. If you are still unable to print, try
the following in order:
1. Check for error messages from the printer software and resolve them by following the onscreen
instructions.
2. If your computer is connected to the printer with a wireless connection, conrm that the connection is
working.
3. Verify that the printer is not paused or oine.
To verify that the printer is not paused or oine
a. Depending upon your operating system, do one of the following:
● Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.
● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices
and printers.
● Windows 7: From the Windows Start menu, click Devices and Printers.
b. Either double-click the icon for your printer or right-click the icon for your printer and select See
what's printing to open the print queue.
c. On the Printer menu, make sure there are no check marks next to Pause Printing or Use Printer
Oine.
d. If you made any changes, try to print again.
4. Verify that the printer is set as the default printer.
To verify that the printer is set as the default printer
a. Depending upon your operating system, do one of the following:
● Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.
● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices
and printers.
● Windows 7: From the Windows Start menu, click Devices and Printers.
b. Make sure the correct printer is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c. If the wrong printer is set as the default printer, right-click the correct printer and select Set as Default
Printer.
d. Try using your printer again.
90 Chapter 9 Solve a problem ENWW
5. Restart the print spooler.
To restart the print spooler
a. Depending upon your operating system, do one of the following:
Windows 10
i. From the Windows Start menu, select Windows Administrative Tools from the app list, and then
select Services.
ii. Right-click the Print Spooler, and then click Properties.
iii. On the General tab, next to Startup type, make sure that Automatic is selected.
iv. If the service is not already running, under Service status, click Start, and then click OK.
Windows 8.1 and Windows 8
i. Point to or tap the upper-right corner of the screen to open the Charms bar, and then click the
Settings icon.
ii. Click or tap Control Panel, and then click or tap System and Security.
iii. Click or tap Administrative Tools, and then double-click or double-tap Services.
iv. Right-click or touch and hold Print Spooler, and then click Properties.
v. On the General tab, next to Startup type, make sure that Automatic is selected.
vi. If the service is not already running, under Service status, click or tap Start, and then click or tap
OK.
Windows 7
i. From the Windows Start menu, click Control Panel, System and Security, and then
Administrative Tools.
ii. Double-click Services.
iii. Right-click the Print Spooler, and then click Properties.
iv. On the General tab, next to Startup type, make sure that Automatic is selected.
v. If the service is not already running, under Service status, click Start, and then click OK.
b. Make sure the correct printer is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c. If the wrong printer is set as the default printer, right-click the correct printer and select Set as Default
Printer.
d. Try using your printer again.
6. Restart the computer.
7. Clear the print queue.
ENWW Get help in this guide 91
To clear the print queue
a. Depending upon your operating system, do one of the following:
● Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.
● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices
and printers.
● Windows 7: From the Windows Start menu, click Devices and Printers.
b. Double-click the icon for your printer to open the print queue.
c. On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to
conrm.
d. If there are still documents in the queue, restart the computer and try printing again after the
computer has restarted.
e. Check the print queue again to make sure it is clear, and then try to print again.
Fix print quality issues
NOTE: To protect the cartridges from drying out, always turn the printer o using the Power button.
To improve print quality (Windows)
1. Make sure you are using original HP cartridges.
2. Check the paper type.
For best print quality, use high quality HP paper, or papers that adhere to the ColorLok® standard. For more
information, see Paper basics on page 23.
Always make sure the paper you are printing on is at. For best results when printing images, use HP
Advanced Photo Paper.
Store specialty paper in its original packaging inside a resealable plastic bag on a at surface in a cool, dry
place. When you are ready to print, remove only the paper you plan to use immediately. When you have
nished printing, return any unused photo paper to the plastic bag. This prevents the photo paper from
curling.
3. Check the printer software to make sure you have selected the appropriate paper type from the Media
drop-down list and print quality from the Quality Settings drop-down list.
In the printer software, click Print & Scan , and then click Set Preferences to access the print properties.
4. Check the estimated ink levels to determine if the cartridges are low on ink.
For more information, see Check the estimated ink levels on page 56. If the cartridges are low on ink
consider replacing them.
5. Align the cartridges.
92 Chapter 9 Solve a problem ENWW
To align the cartridges
a. Load letter or A4 unused plain white paper into the paper tray.
b. Open the printer software. For more information, see Open the HP printer software (Windows)
on page 38.
c. In the printer software, click Print & Scan and then click Maintain Your Printer to access the printer
toolbox.
The printer toolbox appears.
d. Click Align Cartridges on the Device Services tab.
The printer prints an alignment page.
e. Follow the onscreen instructions to align the cartridges. Recycle or discard the cartridge alignment
sheet later.
6. Print a diagnostics page if the cartridges are not low on ink.
To print a diagnostics page
a. Load letter or A4 unused plain white paper into the paper tray.
b. Open the printer software. For more information, see Open the HP printer software (Windows)
on page 38.
c. In the printer software, click Print & Scan and then click Maintain Your Printer to access the printer
toolbox.
d. Click Print Diagnostic Information on the Device Reports tab to print a diagnostics page.
e. Examine the color blocks on the diagnostics page.
If any of the color blocks show white lines, are faded, or are missing completely, continue to the next
step.
Figure 9-1 Color blocks without defects
Figure 9-2 Example of color blocks with defects
7. Clean the cartridges.
ENWW Get help in this guide 93
To clean the cartridges
a. Load letter or A4 unused plain white paper into the paper tray.
b. Open the printer software. For more information, see Open the HP printer software (Windows)
on page 38.
c. In the printer software, click Print & Scan and then click Maintain Your Printer to access the printer
toolbox.
d. Click Clean Cartridges on the Device Services tab. Follow the onscreen instructions.
Network and connection issues
What do you want to do?
●
Fix wireless connection
●
Fix Wi-Fi Direct connection
Fix wireless connection
Choose one of the following troubleshooting options.
● Verify that the printer and the wireless router are turned on and have power. Also make sure that the
wireless radio in the printer is turned on.
● Check that the Wireless indicator on the control panel is on.
● From the printer control panel, press the Resume and (the Information button) at the same
time to print the wireless network test report and network conguration page.
Check the top of the wireless network test report to see if something failed during the test. You can also
see your Wi-Fi signal strength.
– See the DIAGNOSTICS RESULTS section for all tests that were performed, to determine whether or not
your printer passed. If there are issues, perform the recommended steps listed in the report, and then
try using your printer again.
– From the CURRENT CONFIGURATION section, nd out the Network Name (SSID) to which your printer
is currently connected. Make sure that the printer is connected to the same network as your
computer or mobile devices.
– Check your Wi-Fi signal strength. If the signal is weak, verify that the printer is within the range of the
wireless network. For most networks, the printer must be within 30 m (100 ft) of the wireless access
point (wireless router).
● Restore network settings and then reconnect the printer. See Connect using the HP Smart app on page 25.
● From HP Smart help center, nd printer connection help, and then follow onscreen instructions.
● If you are printing from a Windows computer, try using the HP Print and Scan Doctor utility to diagnose and
x the issue automatically.
94 Chapter 9 Solve a problem ENWW
● To determine if a rewall or antivirus program is preventing your computer from connecting to the printer
and nd resolutions, use the HP online rewall troubleshooter .
● For more information about troubleshooting wireless network connection issues, visit www.hp.com/go/
wirelessprinting
Fix Wi-Fi Direct connection
1. Make sure that Wi-Fi Direct is on. If it is o, press and hold (the Information button) for at least three
seconds to turn on all the button lights, and then press and hold , , and together.
2. From your wireless computer or mobile device, search for and connect to the Wi-Fi Direct name of your
printer.
If you are using a mobile device that does not support Wi-Fi Direct, make sure you have installed a
compatible printing app. For more information, visit the HP Mobile Printing website at www.hp.com/go/
mobileprinting. If a local version of this website is not available in your country/region or language, you
might be directed to the HP Mobile Printing website in another country/region or language.
NOTE: If your mobile device does not support Wi-Fi, you are not able to use Wi-Fi Direct.
3. If the Wi-Fi Direct connection security for the printer is set to Manual, do one of the following to connect to
the printer.
● Make sure to enter the correct Wi-Fi Direct password or PIN code when prompted.
● If (the Information button) is blinking white on the printer control panel, make sure to press it
within 30 seconds to conrm the connection.
4. Make sure that the number of Wi-Fi Direct connections has not reached the maximum of ve devices.
5. For more assistance with resolving Wi-Fi Direct problems or conguring Wi-Fi Direct, visit www.hp.com/go/
wpc-wirelessdirect.
Printer hardware issues
TIP: Run the HP Print and Scan Doctor to diagnose and automatically x printing, scanning, and copying issues.
The application is only available in some languages.
The printer shuts down unexpectedly
● Check the power and power connections.
● Make sure the printer's power cord is connected rmly to a functioning power outlet.
ENWW Get help in this guide 95
The cartridge access door is open
● Close the cartridge access door to begin printing.
Cartridges alignment fails
● If the alignment process fails, make sure you have loaded unused, plain white paper into the paper tray. If
you have colored paper loaded in the paper tray when you align the ink cartridges, the alignment fails.
● If the alignment process fails repeatedly, you may need to clean the printhead, or you might have a
defective sensor.
● If cleaning the printhead does not solve the problem, contact HP support. Go to www.support.hp.com . This
website provides information and utilities that can help you correct many common printer problems. If
prompted, select your country/region, and then click All HP Contacts for information on calling for technical
support.
Resolve printer failure
▲ Turn the printer o, then on. If that does not resolve the problem, contact HP.
For more information about contacting HP support, see HP support on page 106.
Printer warning or error status
NOTE: The HP Smart app provides detailed information for printer warnings and errors. Open the app and
check the printer status, and then follow the onscreen instructions to x the issue. Then check the following for
additional assistance if needed.
●
Wireless connection errors
●
Paper error status
●
Ink error status
●
Error Codes on control panel
96 Chapter 9 Solve a problem ENWW
Wireless connection errors
Light behavior Cause and Solution
The large light bar pulses blue from the middle to the edges, repeating.
Between each cycle, there is an amber ash on the large light bar.
There is an Auto Wireless Connect (AWC) error.
● If it occurs during the AWC setup mode, for the more instructions, see
Connect using the HP Smart app on page 25.
● If it occurs after the connection has been completed successfully, for
troubleshooting the issue, see Network and connection issues
on page 94.
The large light bar glows purple at the outside edges and ashes amber in
the center.
There is a wireless connection error during the Wi-Fi Protected Setup
(WPS) mode.
● For more information on how to connect the printer, see Connect
your printer to a wireless network using Wi-Fi Protected Setup (WPS)
on page 26.
● For more information on how to troubleshoot the issue, see Network
and connection issues on page 94.
Paper error status
Light behavior
Cause and Solution
Edge lighting Paper tray light
Amber across the
large light bar
Blinking On O The printer receives a printing job, starts feeding paper, and detects that the paper
width for the printing job is bigger than the width of the loaded paper.
Press (the Cancel button) to cancel the printing job and eject paper.
To avoid the paper size mismatch problem, do one of the following before printing.
● Change the paper size setting for the printing job to match the paper loaded.
● Remove all paper from the paper tray, and then load paper that matches the
paper size setting for the printing job.
TIP: You can change the default paper size automatically detected by the printer.
For more information, see Change the default paper size detected by the printer
on page 22.
Amber across the
large light bar
Blinking On On One of the following might have occurred.
● The printer receives a multipage printing job, detects that the paper length for
the printing job does not match the length of the loaded paper, and then
prints out the rst page of the job with errors.
To cancel the printing job, press (the Cancel button).
ENWW Get help in this guide 97
Light behavior
Cause and Solution
Edge lighting Paper tray light
To continue printing the remaining pages, press (the Resume button).
The remaining pages will have the same errors as the
rst page.
To change the default paper size automatically detected by the printer, see
Change the default paper size detected by the printer on page 22.
● The printer receives a printing job, and detects that there is no paper in the
paper tray.
To cancel the printing job, press (the Cancel button).
To continue printing, load paper, and then press (the Resume button).
For information about how to load paper, see Load media on page 18.
Ink error status
Light behavior
Cause and Solution
Edge
lighting
Cartridge
access door
Ink cartridge light
Amber
across the
large light
bar
Blinking On for the
cartridge with
issue
On On One of the following might have occurred.
● A counterfeit or previously used cartridge is installed.
● The corresponding cartridge is very low on ink.
Try the following solutions to solve the problem.
● If the corresponding cartridge is newly installed, it might be
counterfeit or previously used. Refer to the message in the HP
printer software or the HP Smart app for more information.
● If the corresponding cartridge is not newly installed, it is very low
on ink. Press (the Resume button) to continue printing, and
replace the cartridge when the print quality is no longer
acceptable. For information about how to replace cartridges, see
Replace the cartridges on page 59.
Amber
across the
large light
bar
Blinking Blinking for the
cartridge with
issue
On O One of the following might have occurred.
● The corresponding cartridge is missing.
If one of the cartridges is missing, the printer enters single
cartridge mode. To exit the single cartridge mode, insert the
98 Chapter 9 Solve a problem ENWW
Light behavior
Cause and Solution
Edge
lighting
Cartridge
access door
Ink cartridge light
corresponding cartridge. For more information about the single
cartridge mode, see Use single cartridge mode on page 61.
● The corresponding cartridge is installed improperly, or still has
plastic tape on it.
Remove the corresponding cartridge, make sure there is no plastic
tape on it, and then reinsert the cartridge securely. For more
information, see Replace the cartridges on page 59.
Amber
across the
large light
bar
On O O O The Cartridge access door is open. It must be closed to begin printing.
Amber
across the
large light
bar
Fast
blinking
Fast blinking,
alternating on
both cartridges
On O The carriage inside the printer has stalled.
Press (the Cancel button) to cancel the printing job. Open the
Cartridge access door and make sure the carriage is not obstructed.
Move the carriage to the right and close the Cartridge access door. If the
problem is still not resolved, see Jams and paper-feed issues on page 80
for more information.
Error Codes on control panel
Summary of supported error codes:
Error Codes Description
E0 Unusable cartridge
E1 Paper size mismatch error
E2 Sensor/Paper length mismatch error
E3 Ink carriage stall
E4 Paper jam
E5 Scanner failure
E6 General printer error
E9 Update error
ENWW Get help in this guide 99
Understand printer reports
You can print the following reports to help troubleshoot problems with the printer.
●
Printer status report
●
Network conguration page
●
Print quality report
●
Wireless test report
●
Web access test report
For more information on how to print these reports, see Print reports from control panel on page 7.
Printer status report
Use the printer status report to view current printer information and cartridge status. Also use the printer status
report to help you troubleshoot problems with the printer.
The printer status report also contains a log of recent events.
If you need to call HP, it is often useful to print the printer status report before calling.
Network conguration page
If the printer is connected to a network, you can print a network conguration page to view the network settings
for the printer and a list of networks detected by your printer. The last page of the report includes a list of all
detectable wireless networks in the area, along with signal strength and the channels being used. This might
help you select a channel for your network which is not heavily used by other networks (which will improve
network performance).
NOTE: In order to get the list of detected wireless networks in the area, the wireless radio on the printer should
be turned on. If it is o the list is not displayed.
You can use the network conguration page to help troubleshoot network connectivity problems. If you need to
call HP, it is often useful to print this page before calling.
Print quality report
Print quality problem can be due to many causes - incorrect software setting, a poor image source le, or the
printing system itself. If you are unhappy with the quality of your prints, a Print Quality Report page can help you
determine if the printing system is working correctly.
Wireless test report
When you print the Wireless Test Report, a number of tests are run to check various conditions of the printer
wireless connection. The report shows the results of the tests. If an issue is discovered, message along with how
to x it is provided at the top of the report. Some key wireless conguration details are provided at the bottom
section of the report.
100 Chapter 9 Solve a problem ENWW
Web access test report
Print the web access report to help identify internet connectivity issues which can aect Web Services.
ENWW Understand printer reports 101
Solve problems using Web Services
If you are having problems using Web Services, such as HP ePrint , check the following:
● Make sure the printer is connected to the Internet using an wireless connection.
NOTE: You cannot use these web features if the printer is connected using a USB cable.
● Make sure the latest product updates have been installed on the printer.
● Make sure Web Services is enabled on the printer. For more information, see Set up Web Services
on page 75.
● Make sure the network hub, switch, or router is turned on and working correctly.
● If you are connecting the printer using a wireless connection, make sure the wireless network is functioning
properly. For more information, see Network and connection issues on page 94.
● If you are using HP ePrint , check the following:
● Make sure the printer's email address is correct.
● Make sure that the printer's email address is the only address listed in the “To” line of the email
message. If other email addresses are listed in the “To” line, the attachments you are sending might
not print.
● Make sure you are sending documents that meet the HP ePrint requirements. For more information,
visit the HP Smart website.This site might not be available in all countries/regions.
● If your network uses proxy settings when connecting to the Internet, make sure the proxy settings you are
entering are valid:
● Check the settings being used by the web browser you are using (such as Internet Explorer, Firefox, or
Safari).
● Check with the IT administrator or person who set up your rewall.
If the proxy settings used by your rewall have changed, you must update these settings in either the
printer control panel or the embedded web server. If these settings are not updated, you will not be
able to use Web Services.
For more information, see Set up Web Services on page 75.
TIP: For additional help on setting up and using Web Services, visit the HP Smart website. (might not be
available in all countries/regions).
102 Chapter 9 Solve a problem ENWW
Maintain the printer
Clean the scanner glass
Dust or dirt on the scanner glass, scanner lid backing, or scanner frame can slow down performance, degrade
the quality of scans, and aect the accuracy of special features such as tting copies to a certain page size.
To clean the scanner glass
WARNING! Before cleaning the printer, turn the printer o by pressing (the Power button) and unplugging
the power cord from the electrical socket.
1. Lift the scanner lid.
2. Clean the scanner glass and lid backing by using a soft, lint-free cloth that has been sprayed with a mild
glass cleaner.
CAUTION: Use only glass cleaner to clean the scanner glass. Avoid cleaners that contain abrasives,
acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl
alcohol because it can leave streaks on the scanner glass.
CAUTION: Do not spray the glass cleaner directly on the scanner glass. If too much glass cleaner is
applied, the cleaner could leak under the scanner glass and damage the scanner.
3. Close the scanner lid, and turn on the printer.
ENWW Maintain the printer 103
Clean the exterior
WARNING! Before cleaning the printer, turn the printer o by pressing (the Power button) and unplug the
power cord from the electrical socket.
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains o of the case. Keep uids away from the
interior of the printer, as well as from the printer control panel.
104 Chapter 9 Solve a problem ENWW
Restore original factory defaults and settings
If you disable some functions or change some settings and want to change them back, you can restore the
printer to the original factory settings or network settings.
To restore the printer to the original factory defaults
1. Lift the cartridge access door to expose the cartridge area.
2. While the cartridge access door is open, press and hold (the Power button) and Wireless button
on the back of the printer for three seconds.
To restore the printer to the original network settings
● On the back of the printer, press and hold the Wireless button for at least three seconds.
NOTE: When you reset the printer network settings, previously congured wireless settings (such as the link
speed or IP address) are removed. The IP address is set back to the Automatic mode.
TIP: You can visit the HP online support website at www.support.hp.com for information and utilities that can
help you correct many common printer problems.
(Windows) Run the HP Print and Scan Doctor to diagnose and automatically x printing, scanning, and copying
issues. The application is only available in some languages.
ENWW Restore original factory defaults and settings 105
HP support
For the latest product updates and support information, visit the product support website at
www.support.hp.com. HP online support provides a variety of options for help with your printer:
Get troubleshooting assistance: Find information for resolving paper jams, network connection issues, print quality
issues, printer errors, and more.
Get software and drivers: Download software, drivers, and rmware you need for the printer.
Ask the community: Join the community forums to nd solutions, ask questions, and share tips.
HP Diagnostics Solutions: Use HP online tools to detect your printer and nd recommended solutions. For Windows
operating systems, you can automatically diagnose and resolve printer issues with HP Print and Scan Doctor.
NOTE: You can also nd help online by visiting the Printer Essentials webpage. Here you can nd links to install
the HP Smart app, purchase replacement ink for your printer (including HP Instant Ink, if applicable), and get help
with common printer tasks.
Contact HP
If you need help from an HP technical support representative to solve a problem, visit the www.support.hp.com.
The following contact options are available at no cost for in-warranty customers (HP agent-assisted support for
out-of warranty customers may require a fee):
Chat with an HP support agent or the HP Virtual Agent online.
Call an HP support agent.
When contacting HP support, be prepared to provide the following information:
● Product name (Located on the printer)
● Product number and serial number (located inside the cartridge access door)
106 Chapter 9 Solve a problem ENWW
Register printer
By taking just a few minutes to register, you can enjoy quicker service, more ecient support, and product
support alerts. If you did not register your printer while installing the software, you can register now at
https://www.register.hp.com.
Additional warranty options
Extended service plans are available for the printer at additional costs. Go to www.support.hp.com, select your
country/region and language, then explore the extended warranty options available for your printer.
ENWW HP support 107
10 HP EcoSolutions (HP and the Environment)
HP is committed to helping you optimize your environmental footprint and empowering you to print responsibly
—at home or in the oce.
For more detailed information about environmental guidelines that HP follows during the manufacturing
process, see Environmental product stewardship program on page 120. For more information about HP's
environmental initiatives, visit www.hp.com/ecosolutions.
108 Chapter 10 HP EcoSolutions (HP and the Environment) ENWW
Energy Save Mode
Power usage is reduced while in Energy Save Mode.
After initial setup of printer, the printer will enter Energy Save Mode after 5 minutes of inactivity.
To change the time to Energy Save Mode from the embedded web server (EWS)
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 34.
2. Click the Settings tab.
3. In the Power Management section, click Energy Save Mode, and select the desired option.
4. Click Apply.
ENWW Energy Save Mode 109
A Technical information
The technical specications and international regulatory information for the HP ENVY 6000 All-in-One series are
provided in this section.
For additional specications, see the printed documentation that came with the HP ENVY 6000 All-in-One series.
This section contains the following topics:
●
HP Company notices
●
Specications
●
Regulatory notices
●
Environmental product stewardship program
110 Appendix A Technical information ENWW
HP Company notices
The information contained herein is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written
permission of HP, except as allowed under the copyright laws. The only warranties for HP products and services
are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
or omissions contained herein.
© Copyright 2020 HP Development Company, L.P.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license.
ENWW HP Company notices 111
Specications
The information here is subject to change without notice. For more product specications, see the Product Data
Sheet at www.support.hp.com .
System requirements
● For information about software and system requirements or future operating system releases and
support, visit the HP online support website at www.support.hp.com .
Environmental specications
● Recommended operating temperature range: 15°C to 30°C (59°F to 86°F)
● Allowable operating temperature range: 5°C to 40°C (41°F to 104°F)
● Humidity: 25% to 75% RH non-condensing (recommended);
● Nonoperating (Storage) temperature range: –40°C to 60°C (–40°F to 140°F)
● In the presence of high electromagnetic elds, it is possible the output from the printer may be slightly
distorted
paper tray capacity
● Plain paper sheets: Up to 80
● Envelopes: Up to 10
● Index cards: Up to 40
● Photo paper sheets: Up to 30
Output tray capacity
● Plain paper sheets: Up to 25
● Envelopes: Up to 5
● Photo paper sheets: Up to 10
Paper size
● For a complete list of supported media sizes, see the printer software.
Paper weights
● Plain Paper: 60 to 90 g/m² (16 to 32 lb bond)
● Envelopes: 75 to 90 g/m² (20 to 55 lb bond envelope)
● Cards: Up to 200 g/m² (110 lb index maximum)
● Photo Paper: Up to 300 g/m² (145 lb bond)
112 Appendix A Technical information ENWW
Print specications
● Print speeds vary according to the complexity of the document
● Method: drop-on-demand thermal inkjet
● Language: PCL3 GUI
Print resolution
● For a list of supported print resolutions, visit the product support website at www.support.hp.com.
Scan specications
●
● Optical Resolution: up to 1200 dpi
● Hardware Resolution: up to 1200 x 1200 dpi
● Enhanced Resolution: up to 1200 x 1200 dpi
● Bitdepth: 24-bit color, 8-bit grayscale (256 levels of gray)
● Maximum scan size from glass: 215.9 x 297 mm (8.5 x 11.7 inches)
● Supported File Types: RAW, JPEG, PDF
● Twain Version: 1.9
Copy specications
●
● Copy Resolution (black and color): up to 300 x 300 dpi
● Digital image processing
● Maximum number of copies varies by model.
● Copy speeds vary according to the complexity of the document and model.
Cartridge yield
● Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.
Acoustic information
● If you have Internet access, you can access acoustic information from the HP website.
ENWW Specications 113
Regulatory notices
The HP ENVY 6000 All-in-One series meets product requirements from regulatory agencies in your country/
region.
This section contains the following topics:
●
Regulatory model number
●
FCC statement
●
Notice to users in Korea
●
VCCI (Class B) compliance statement for users in Japan
●
Notice to users in Japan about the power cord
●
Noise emission statement for Germany
●
European Union Regulatory Notice
●
Visual display workplaces statement for Germany
●
Declaration of conformity
●
Regulatory wireless statements
Regulatory model number
For regulatory identication purposes, your product is assigned with a Regulatory Model Number. The Regulatory
Model Number for your product is SNPRC-1807-01 and this number should not be confused with the marketing
names or product numbers.
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specied that the following
notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and the receiver.
● Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
For further information, contact: Manager of Corporate Product Regulations, HP Inc. 1501 Page Mill Road, Palo
Alto, CA 94304, U.S.A.
Modications (part 15.21)
114 Appendix A Technical information ENWW
The FCC requires the user to be notied that any changes or modications made to this device that are not
expressly approved by HP may void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Notice to users in Korea
B급 기기
(가정용 방송통신기자재)
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로
하며, 모든 지역에서 사용할 수 있습니다.
VCCI (Class B) compliance statement for users in Japan
この装置は、クラス B 機器です。この装置は、住宅環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信
機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。
VCCI-B
Notice to users in Japan about the power cord
製品には、同梱された電源コードをお使い下さい。
同梱された電源コードは、他の製品では使用出来ません。
Noise emission statement for Germany
Geräuschemission
LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T. 19
European Union Regulatory Notice
Products bearing the CE marking comply to applicable EU Directives and related European Harmonised
Standards. The full Declaration of Conformity can be found at the following website:
www.hp.eu/certicates (Search with the product model name or its Regulatory Model Number (RMN), which may
be found on the regulatory label.)
The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany.
ENWW Regulatory notices 115
Products with wireless functionality
EMF
● This product meets international guidelines (ICNIRP) for exposure to radio frequency radiation.
If it incorporates a radio transmitting and receiving device that in normal use, a separation distance of 20
cm ensures that radio frequency exposure levels comply with EU requirements.
Wireless functionality in Europe
● For products with 802.11 b/g/n or Bluetooth radio:
– This product operates on radio frequency between 2400 MHz and 2483.5 MHz, with a transmit power
of 20 dBm (100 mW) or less.
● For products with 802.11 a/b/g/n radio:
– This product operates on radio frequencies between 2400 MHz and 2483.5 MHz, and between 5170
MHz and 5710 MHz, with a transmit power of 20 dBm (100 mW) or less.
–
CAUTION: IEEE 802.11x wireless LAN with 5.15-5.35 GHz frequency band is
restricted for indoor use only for all countries reected in the matrix. Using this
WLAN application outdoor might lead to interference issues with existing radio
services.
Visual display workplaces statement for Germany
GS-Erklärung (Deutschland)
Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um
störende Reexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren
Gesichtsfeld platziert werden.
Declaration of conformity
Declaration of conformity can be found at www.hp.eu/certicates.
Regulatory wireless statements
This section contains the following regulatory information pertaining to wireless products:
●
Exposure to radio frequency radiation
●
Notice to users in Canada (5 GHz)
●
Notice to users in Taiwan (5 GHz)
●
Notice to users in Serbia (5 GHz)
●
Notice to users in Mexico
●
Notice to users in Brazil
116 Appendix A Technical information ENWW
●
Notice to users in Canada
●
Notice to users in Taiwan
●
Notice to users in Japan
●
Notice to users in Thailand (5 GHz)
Exposure to radio frequency radiation
CAUTION: The radiated output power of this device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during normal
operation is minimized. This product and any attached external antenna, if supported, shall be placed in such a
manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of
exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm
(8 inches) during normal operation.
Notice to users in Canada (5 GHz)
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its
operation in the 5.15- to 5.25-GHz frequency range. The Industry Canada requires this product to be used
indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-
channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz
and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.
ATTENTION: Lors de l'utilisation du réseau local sans l IEEE 802.11a, ce produit se limite à une utilisation en
intérieur à cause de son fonctionnement sur la plage de fréquences de 5,15 à 5,25 GHz. Industrie Canada stipule
que ce produit doit être utilisé en intérieur dans la plage de fréquences de 5,15 à 5,25 GHz
an de réduire le
risque d'interférences éventuellement dangereuses avec les systèmes mobiles par satellite via un canal
adjacent. Le radar à haute puissance est alloué pour une utilisation principale dans une plage de fréquences de
5,25 à 5,35 GHz et de 5,65 à 5,85 GHz. Ces stations radar peuvent provoquer des interférences avec cet appareil
et l'endommager.
Notice to users in Taiwan (5 GHz)
在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
Notice to users in Serbia (5 GHz)
Upotreba ovog uredjaja je ogranicna na zatvorene prostore u slucajevima koriscenja na frekvencijama od
5150-5350 MHz.
Notice to users in Mexico
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia,
incluyendo la que pueda causar su operación no deseada.
Para saber el modelo de la tarjeta inalámbrica utilizada, revise la etiqueta regulatoria de la impresora.
Notice to users in Brazil
Este equipamento opera em caráter secundário, isto é, não tem direito à proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência em sistemas operando em
caráter primário.
ENWW Regulatory notices 117
Notice to users in Canada
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
WARNING! Exposure to Radio Frequency Radiation. The radiated output power of this device is below the
Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that
the potential for human contact is minimized during normal operation.
To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to
the antennas should not be less than 20 cm (8 inches).
Conformément au Règlement d'Industrie Canada, cet émetteur radioélectrique ne peut fonctionner qu'avec une
antenne d'un type et d'un gain maximum (ou moindre) approuvé par Industrie Canada. An de réduire le
brouillage radioélectrique potentiel pour d'autres utilisateurs, le type d'antenne et son gain doivent être choisis
de manière à ce que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas celle nécessaire à une
communication réussie.
Cet appareil est conforme aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement dépend
des deux conditions suivantes : (1) cet appareil ne doit pas provoquer d'interférences nuisibles et (2) doit
accepter toutes les interférences reçues, y compris des interférences pouvant provoquer un fonctionnement non
souhaité de l'appareil.
AVERTISSEMENT relatif à l'exposition aux radiofréquences. La puissance de rayonnement de cet appareil se
trouve sous les limites d'exposition de radiofréquences d'Industrie Canada. Néanmoins, cet appareil doit être
utilisé de telle sorte qu'il doive être mis en contact le moins possible avec le corps humain.
An d'éviter le dépassement éventuel des limites d'exposition aux radiofréquences d'Industrie Canada, il est
recommandé de maintenir une distance de plus de 20 cm entre les antennes et l'utilisateur.
Notice to users in Taiwan
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變
更設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至
無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫
藥用電波輻射性電機設備之干擾。
Notice to users in Japan
この機器は技術基準適合証明又は工事設計認証を受けた無線設備を搭載しています。
118 Appendix A Technical information ENWW
Notice to users in Thailand (5 GHz)
เครื่องวิทยุคมนาคมนี้มีระดับการแผ่คลื่นแม่เหล็กไฟฟ้ าสอดคล้องตามมาตรฐานความปลอดภัยต่อสุขภาพของมนุษย์จากการ
ใช้เครื่องวิทยุคมนาคมที่คณะกรรมการกิจการโทรคมนาคมแห่งชาติประกาศกําหนด
This radio communication equipment has the electromagnetic eld strength in compliance with the Safety
Standard for the Use of Radio Communication Equipment on Human Health announced by the National
Telecommunications Commission.
ENWW Regulatory notices 119
Environmental product stewardship program
HP is committed to providing quality products in an environmentally sound manner. Design for recycling has
been incorporated into this product. The number of materials has been kept to a minimum while ensuring proper
functionality and reliability. Dissimilar materials have been designed to separate easily. Fasteners and other
connections are easy to locate, access, and remove using common tools. High priority parts have been designed
to access quickly for ecient disassembly and repair. For more information, visit HP's Commitment to the
Environment website at:
www.hp.com/sustainableimpact
●
HP tips for reducing environmental impact
●
Eco-Tips
●
European Union Commission Regulation 1275/2008
●
Paper
●
Plastics
●
Safety data sheets
●
Recycling program
●
HP inkjet supplies recycling program
●
Power consumption
●
Disposal of waste equipment by users
●
Chemical substances
●
Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan)
●
The Table of Hazardous Substances/Elements and their Content (China)
●
Restriction of hazardous substance (Ukraine)
●
Restriction of hazardous substance (India)
●
Restriction on hazardous substances statement (Turkey)
●
EPEAT
●
SEPA Ecolabel User Information (China)
●
China Energy Label for Printer, Fax and Copier
●
Battery disposal in Taiwan
●
European Union Battery Directive
●
Battery notice for Brazil
●
California Perchlorate Material Notice
●
Waste disposal for Brazil
120 Appendix A Technical information ENWW
HP tips for reducing environmental impact
● Choose from a wide variety of HP papers with FSC
®
or PEFC
TM
certication, which indicates that the paper
pulp came from a reputable and well-managed source.
1
●
Conserve resources-look for paper made with recycled content.
● Recycle your Original HP cartridges-it's easy and free with the HP Planet Partners program, available in 47
countries and territories worldwide.
2
● Save paper by printing on both sides of the page.
● Conserve energy by choosing ENERGY STAR
®
certied HP products.
● Lower your carbon footprint-all HP printers include power management settings that help you control
energy use.
● Discover more ways HP and our customers are reducing environmental impact at www.hp.com/
ecosolutions.
1
HP papers certied under FSC®C017543 or PEFC™TMPEFC/29-13-198.
2
Program availability varies. Original HP cartridge return and recycling is currently available in more than
50 countries, territories, and regions in Asia, Europe, and North and South America through the HP Planet
Partners program. For more information, visit: www.hp.com/recycle.
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. Please visit the HP Eco Solutions
website for more information on HP’s environmental initiatives.
www.hp.com/sustainableimpact
European Union Commission Regulation 1275/2008
For product power data, including the power consumption of the product in networked standby if all wired
network ports are connected and all wireless network ports are activated, please refer to section P15 ‘Additional
Information’ of the product IT ECO Declaration at www.hp.com/hpinfo/globalcitizenship/environment/
productdata/itecodesktop-pc.html.
Paper
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify
plastics for recycling purposes at the end of product life.
Safety data sheets
Safety Data Sheets, product safety and environmental information are available at www.hp.com/go/ecodata or
on request.
ENWW Environmental product stewardship program 121
Recycling program
HP oers an increasing number of product return and recycling programs in many countries/regions, and
partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by
reselling some of its most popular products. For more information regarding recycling of HP products, please
visit:
www.hp.com/recycle
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in many
countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more
information, go to the following website:
www.hp.com/recycle
Power consumption
HP printing and imaging equipment marked with the ENERGY STAR® logo is certied by the U.S. Environmental
Protection Agency. The following mark will appear on ENERGY STAR certied imaging products:
Additional ENERGY STAR certied imaging product model information is listed at: www.hp.com/go/energystar
Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste. Instead,
you should protect human health and the environment by handing over your waste equipment
to a designated collection point for the recycling of waste electrical and electronic equipment.
For more information, please contact your household waste disposal service, or go to
http://www.hp.com/recycle.
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our products as
needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European
Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/
reach.
122 Appendix A Technical information ENWW
Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan)
台灣 限用物質含有情況標示聲明書
Taiwan Declaration of the Presence Condition of the Restricted Substances Marking
單元
Unit
限用物質及其化學符號
Restricted substances and their chemical symbols
鉛
(Pb)
汞
(Hg)
鎘
(Cd)
六價鉻
(Cr
+6
)
多溴聯苯
(PBB)
多溴二苯醚
(PBDE)
列印引擎
Print engine
－ ◯ ◯ ◯ ◯ ◯
外殼和 紙匣
External casing and trays
◯ ◯ ◯ ◯ ◯ ◯
電源供應器
Power supply
－ ◯ ◯ ◯ ◯ ◯
電線
Cables
◯ ◯ ◯ ◯ ◯ ◯
印刷電路板
Printed circuit board
－ ◯ ◯ ◯ ◯ ◯
控制面板
Control panel
－ ◯ ◯ ◯ ◯ ◯
墨水匣
Cartridge
◯ ◯ ◯ ◯ ◯ ◯
掃描器 組件
Scanner assembly
－ ◯ ◯ ◯ ◯ ◯
備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the
reference percentage value of presence condition.
備考 2.〝◯〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2: “◯” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of
presence.
備考 3.〝－〞係指該項限用物質為排除項目。
Note 3: 〝－〞 indicates that the restricted substance corresponds to the exemption.
若要存取產品的最新使用指南或手冊，請前往 www.support.hp.com。選取搜尋您的產品，然後依照 畫面
上的指示繼續執行。
To access the latest user guides or manuals for your product, go to www.support.hp.com. Select Find your
product, and then follow the onscreen instructions.
ENWW Environmental product stewardship program 123
The Table of Hazardous Substances/Elements and their Content (China)
产品中有害物质或元素的名称及含量
根据中国《电器电子产品有害物质限制使用管理办法》
部件名称
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
外壳和托盘 ◯ ◯ ◯ ◯ ◯ ◯
电线 ◯ ◯ ◯ ◯ ◯ ◯
印刷电路板 X ◯ ◯ ◯ ◯ ◯
打印系统 X ◯ ◯ ◯ ◯ ◯
显示器 X ◯ ◯ ◯ ◯ ◯
喷墨打印机墨盒 ◯ ◯ ◯ ◯ ◯ ◯
驱动光盘 X ◯ ◯ ◯ ◯ ◯
扫描仪 X ◯ ◯ ◯ ◯ ◯
网络配件 X ◯ ◯ ◯ ◯ ◯
电池板 X ◯ ◯ ◯ ◯ ◯
自动双面打印系统 ◯ ◯ ◯ ◯ ◯ ◯
外部电源 X ◯ ◯ ◯ ◯ ◯
本表格依据 SJ/T 11364 的规定编制。
◯：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
此表中所有名称中含 “X” 的部件均符合中国 RoHS 达标管理目录限用物质应用例外清单的豁免。
此表中所有名称中含 “X” 的部件均符合欧盟 RoHS 立法。
注：环保使用期限的参考标识取决于产品正常工作的温度和湿度等条件。
Restriction of hazardous substance (Ukraine)
Технічний регламент щодо обмеження використання небезпечних речовин (Украïна)
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких
небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою Кабінету
Міністрів України від 3 грудня 2008 № 1057
124 Appendix A Technical information ENWW
Restriction of hazardous substance (India)
This product, as well as its related consumables and spares, complies with the reduction in hazardous
substances provisions of the "India E-waste (Management and Handling) Rule 2016." It does not contain lead,
mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations
exceeding 0.1 weight % and 0.01 weight % for cadmium, except for where allowed pursuant to the exemptions
set in Schedule 2 of the Rule.
Restriction on hazardous substances statement (Turkey)
Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur
EPEAT
Most HP products are designed to meet EPEAT. EPEAT is a comprehensive environmental rating that helps
identify greener electronics equipment. For more information on EPEAT go to www.epeat.net. For information on
HP's EPEAT registered products go to www.hp.com/hpinfo/globalcitizenship/environment/pdf/
epeat_printers.pdf.
SEPA Ecolabel User Information (China)
中国环境标识认证产品用户说明
噪声大于 63.0 dB(A) 的办公设备不宜放置于办公室内，请在独立的隔离区域使用。
如需长时间使用本产品或打印大量文件，请确保在通风良好的房间内使用。
如您需要确认本产品处于零能耗状态，请按下电源关闭按钮，并将插头从电源插座断开。
您可以使用再生纸，以减少资源耗费。
China Energy Label for Printer, Fax and Copier
复印机、打印机和传真机能源效率标识实施规则
依据“复印机、打印机和传真机能源效率标识实施规则”，该打印机具有中国能效标识。标识上显示的能效
等级和操作模式值根据“复印机、打印机和传真机能效限定值及能效等级”标准（“GB 21521”）来确定和计
算。
1. 能效等级
产品能效等级分 3 级，其中 1 级能效最高。能效限定值根据产品类型和打印速度由标准确定。能效
等级则根据基本功耗水平以及网络接口和内存等附加组件和功能的功率因子之和来计算。
2. 能效信息
喷墨打印机
– 操作模式功率
睡眠状态的能耗按照 GB 21521 的标准来衡量和计算。该数据以瓦特 (W) 表示。
– 待机功率
待机状态是产品连接到电网电源上功率最低的状态。该状态可以延续无限长时间，且使用者无
法改变此状态下产品的功率。对于“成像设备”产品，“待机”状态通常相当于“关闭”状态，但也可
能相当于“准备”状态或者“睡眠”状态。该数据以瓦特 (W) 表示。
ENWW Environmental product stewardship program 125
– 睡眠状态预设延迟时间
出厂前由制造商设置的时间决定了该产品在完成主功能后进入低耗模式（例如睡眠、自动关
机）的时间。该数据以分钟表示。
– 附加功能功率因子之和
网络接口和内存等附加功能的功率因子之和。该数据以瓦特 (W) 表示。
标识上显示的能耗数据是根据典型配置测量得出的数据，此类配置包含登记备案的打印机依据复印机、
打印机和传真机能源效率标识实施规则所选的所有配置。因此，该特定产品型号的实际能耗可能与标识
上显示的数据有所不同。
要了解规范的更多详情，请参考最新版的 GB 21521 标准。
Battery disposal in Taiwan
European Union Battery Directive
This product contains a battery that is used to maintain data integrity of real time clock or product settings and is
designed to last the life of the product. Any attempt to service or replace this battery should be performed by a
qualied service technician.
Battery notice for Brazil
A bateria deste equipamento nao foi projetada para ser removida pelo cliente.
California Perchlorate Material Notice
Perchlorate material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/perchlorate
This product's real-time clock battery or coin cell battery may contain perchlorate and may require special
handling when recycled or disposed of in California.
126 Appendix A Technical information ENWW
Waste disposal for Brazil
Não descarte o produto eletronico em
lixo comum
Este produto eletrônico e seus componentes não devem ser descartados no lixo comum, pois
embora estejam em conformidade com padrões mundiais de restrição a substâncias nocivas,
podem conter, ainda que em quantidades mínimas, substâncias impactantes ao meio ambiente.
Ao nal da vida útil deste produto, o usuário deverá entregá-lo à HP. A não observância dessa
orientação sujeitará o infrator às sanções previstas em lei.
Após o uso, as pilhas e/ou baterias dos produtos HP deverão ser entregues ao estabelecimento
comercial ou rede de assistência técnica autorizada pela HP.
Para maiores informações, inclusive sobre os pontos de recebimento, acesse:
www.hp.com.br/reciclar
ENWW Environmental product stewardship program 127
Index
B
both sides, print on 49
buttons, control panel 4
C
Cartridge access door
locating 2
cartridge latch, cartridge
locating 2
cartridges
check ink levels 56
tips 55
clean
exterior 104
scanner glass 103
connectors, locating 3
control panel
buttons 4
features 4
copy
specications 113
customer support
warranty 107
D
diagnostic page 100
double-sided printing 49
E
embedded web server
about 40
opening 34
troubleshoot, cannot be opened
40
Webscan 70
environment
Environmental product
stewardship program 120
environmental specications 112
EWS. See embedded web server
G
glass, scanner
clean 103
I
ink levels, check 56
IP address
checking for printer 41
J
jams
clear 80
M
maintenance
check ink levels 56
clean 104
diagnostic page 100
media
duplexing 49
multi-feeds, troubleshoot 87
N
network connection
wireless connection 26
networks
connector illustration 3
view and print settings 7
wireless settings 100
O
operating systems supported 112
P
paper
clear jams 80
skewed pages 87
troubleshoot feeding 87
paper tray
locating 2
paper-feed problems, troubleshoot
87
power
troubleshoot 95
power input, locating 3
print
diagnostic page 100
double-sided 49
specications 113
troubleshoot 95
print quality report 100
printer control panel
locating 2
printer software (Windows)
about 39
opening 38, 39
printer status report
information on 100
R
rear access
illustration 3
recycle
ink cartridges 122
regulatory notices 114
regulatory model identication
number 114
wireless statements 116
reports
diagnostic 100
web access 101
wireless test 100
S
scan
from Webscan 70
scan specications 113
128 Index ENWW
scanner glass
clean 103
skew, troubleshoot
print 87
software
scan 68
Webscan 70
specications
system requirements 112
status
network conguration page 100
system requirements 112
T
technical information
copy specications 113
environmental specications 112
print specications 113
scan specications 113
trays
clear paper jams 80
locating 2
paper-width guides 2
troubleshoot feeding 87
troubleshoot
embedded web server 40
HP Smart 79
multiple pages are picked 87
network conguration page 100
paper not picked up from tray 87
paper-feed problems 87
power 95
print 95
printer status report 100
skewed pages 87
two-sided printing 49
V
view
network settings 7
W
warranty 107
web access test report 101
Webscan 70
Windows
system requirements 112
wireless test report 100
ENWW Index 129
