Loading ...
Loading ...
Loading ...
Turn Wi-Fi On or Off
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > Wi-Fi On/Off
Wired Connection
What You Need
To connect the TV to the Internet, you need a
network router with a connection to the Internet. Use a
high-speed (broadband) connection to the Internet.
Make the Connection
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > Connect to network > Wired
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - The TV constantly searches for the network
connection.
4 - A message will be shown when the connection is
successful.
If the connection fails, you can check the DHCP setting of
the router. DHCP should be switched on.
**To fulfill EMC regulations, use a shielded FTP Cat. 5E
Ethernet cable.
Wireless and Network Settings
View Network Settings
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > View network settings
You can view all current network settings here. The IP
and MAC address, signal strength, speed, encryption
method, etc.
Network Configuration - Static IP
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > Network Configuration > Static IP
If you are an advanced user and want to install your
network with Static IP addressing, set the TV to Static IP.
Network Configuration - Static IP Configuration
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > Static IP configuration
1 - Select Static IP configuration and configure the
connection.
2 - You can set the number for IP
Address, Netmask, Gateway, DNS 1, or DNS 2.
Switch On with Wi-Fi (WoWLAN)
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > Switch On with Wi-Fi (WoWLAN)
You can switch this TV on from your smartphone or
tablet if the TV is in Standby. The setting Switch On with
Wi-Fi (WoWLAN) must be switched on.
Digital Media Renderer - DMR
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > Digital Media Renderer - DMR
If your media files do not play on your TV, make sure that
the Digital Media Renderer is switched on. As a factory
setting, DMR is switched on.
Switch on Wi-Fi connection
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > Wi-Fi On/Off
You can switch on or off Wi-Fi connection on your TV.
Reset Screen Mirroring connection
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > Reset Screen Mirroring connection
Clear the list of connected and blocked devices that are
used with Screen Mirroring.
TV network name
(Home) > Settings > Wireless & networks > Wired or
Wi-Fi > TV network name
If you have more than one TV in your home network, you
can give the TV a unique name.
Terms of use
(Home) > Settings > General settings > Terms of use
You can view the contents of Terms of use, which is
40
Loading ...
Loading ...
Loading ...