Loading ...
Loading ...
Loading ...
When HPV (humidity-present value) is
lower than HS (humidity set value),
will disappear, work2 will be turned o,
and dehumidifying will stop.
For example: HS = 50% RH, HD = 10%
RH, as shown in Fig. 10.
When T
PV (temperature-present value) is higher than TAH (temperature alarm
high limit), the temperature alarm high limit will be triggered and code will
be displayed;
When T
PV (temperature-present value) is lower than TAL (temperature alarm
low limit), the temperature alarm low limit will be triggered and code will
be displayed;
During the alarm, the buzzer makes a sound of "bi-bi-Biii" until the temperature
is back to the normal temperature range; or press any button to mute the alarm.
During the temperature alarm limit, the output of WORK1 socket is not aected.
4.3 Temperature Alarm Limit- TAH, TAL
The temperature can be calibrated if the temperature-present value
deviates from the actual temperature.
T
PV (temperature - present value after calibration) = TPV (temperature -
present value before calibration) + TCA (temperature calibrated value).
4.4 Temperature Calibration - TCA
The temperature unit can be switched between Celsius and Fahrenheit.
The temperature related parameter values will be restored to factory
default values after the temperature unit is changed.
4.5 Temperature Unit - CF
Dehumidifying mode (HDH = D)
When H
PV (humidity-present value) is higher than HS + HD (humidity set
value + humidity dierential), will appear, work2 will be turned on, and
Dehumidifying will begin;
4.6 Humidity Settings - HDH, HS, HD
t
%RH
60
HS=50
HD=10
WORK2 On
WORK2 O
Fig. 10
-10-
Loading ...
Loading ...
Loading ...