Loading ...
Loading ...
Loading ...
11
ENEN
TV menu example (different models may have
dierent menus) :
Setting--sound--Soundbar Setting.
Note:
• This function is available only when both
Soundbar and TV support Hisense Ezplay.
• This function requires Soundbar and TV
connected via HDMI ARC, and the CEC of the
TV must be trned ON.
• If everting setting right, for the first time
connect, there would be a tip on the TV
screen to guide you find the Soundbar
setting menu.
7. Basic Operation
7.1 Standby/ON
When you rst connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the
button on the unit or on the
remote control to switch the unit ON.
• Press the
button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
7.2 Auto-Standby / Auto-Wake
• [Auto-Standby] The soundbar automatically
turns to Standby mode after about 15
minutes if the TV or the external soundbar
is disconnected (or USB, BT function bit
playback pause), or switched o.
• [Auto-Wake] If a TV or an external device
is connected (OPTICAL socket), the unit will
switch on automatically when the TV or the
external device is switched on.
Auto-standby ON/OFF
Turn on the soundbar, press and hold the[
]
[
+
] button at the same time on the soundbar to
activate and deactivate the auto-standby:
Lamp
Mode
●● ●● ●● ●●
Auto Standby On
:
Your Soundbar has been programmed to
enter Standby mode automatically when
no audio is detected for 15 minutes.
●● ●● ●●
Auto Standby O:
You can turn o the Auto Standby to keep
your Soundbar always working.
Activate and Deactivate the Auto-Wake:
In optical mode, press the VOL
+
, VOL
+
,
,
buttons on the remote control to activate and
deactivate the auto-wake:
Lamp
Mode
●● ●● ●● ●●
Auto-Wake On
The Soundbar will wake up automatically
when audio input is detected.
●● ●● ●●
Auto-Wake o
The Soundbar does not wake up automatically.
7.3 Select Modes
• Press the (SOURCE) button repeatedly
on the unit or on the remote control to select
the desired mode.
• The indicator light on the front of the main
unit will show which mode is currently in use.
Lamp
Mode
●●
Red Standby
●●
Green
AUX
●●
Blue BT (Bluetooth)
●●
Orange
OPTICAL
●●
White
HDMI ARC
●●
Yellow
USB
7.4 Adjust the Volume
• Press the VOL
+
/ VOL- buttons on the unit or
on the remote control to adjust the volume.
• If you wish to turn the sound o, press the
(MUTE) button on the remote control. Press
the
(MUTE) button again or press the VOL
+
/
-
buttons to resume normal listening.
FPO
Loading ...
Loading ...
Loading ...