Loading ...
Loading ...
Loading ...
11
ASSEMBLY
Attaching Side Discharge Chute or Side
Discharge Blower (If Equipped)
The mower is shipped as a mulcher. To convert to side discharge
or side discharge blower, ensure the grass catcher is removed,
the rear mulch plug is installed (if equipped) and the rear
discharge door is closed.
1. Lift the mulch plug (Figure 18).
2. Slide the two hooks of the side discharge chute (a) or side
discharge blower (b) under the mulch plug hinge pin. Lower
the mulch plug.
IMPORTANT: Do not remove side mulch plug at any time.
a
b
1 1
2 2
Figure 18
NOTE: Some side discharge chutes include a clip to secure the
discharge chute to the handle. If equipped, the side discharge
chute can be secured to the handle when not in use (Figure 19).
Figure 19
Electric Start Set-Up (If Equipped)
NOTE: Mowers equipped with electric start will use either a
lead acid battery in an enclosed battery box (see Electric Starter
Battery Box) or a removable lithium ion battery pack (See
Installing/Removing Battery Pack).
ELECTRIC STARTER BATTERY BOX IF EQUIPPED
NOTE: Remove cable tie (a) from around battery box. Cable tie is
used for shipping only (Figure 20).
a
Figure 20
INSTALLING/REMOVING BATTERY PACK IF EQUIPPED
NOTE: To ensure maximum performance and life of lithium-ion
battery packs, charge the battery fully before first use.
WARNING
Read all safety warnings, instructions, and cautionary
markings for the battery pack, charger and product.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
IMPORTANT: Refer to instructional manual supplied with
battery charger for charging, maintenance and battery disposal
instructions.
Installing The Battery Pack (Figure 21):
1. Lift the battery box cover.
2. Insert the battery pack into the battery box. An audible
“click” will be heard when the battery is properly connected.
3. Close the battery box cover.
Removing The Battery Pack (Figure 21):
1. Lift the battery box cover.
2. Press the battery pack release button.
3. Pull the battery pack from the battery box.
4. Close the battery box cover.
4
1
3
2
1
3
2
Installing
Battery Pack
Removing
Battery Pack
Figure 21
Loading ...
Loading ...
Loading ...