Loading ...
Loading ...
Loading ...
CONTROL PANEL
normal conditions and a high speed when odours are
more concentrated.
start cooking.
after cooking or until all odours have dispersed.
A. Filter
to be cleaned .
deactivated with a single touch.
B. Timer
Using the Timer
rangehood will continue to run for an additional 5 to15
minutes, depending on the selected fan speed .
then reduce to medium for 5 minutes, then reduce to low
after cooking.
C. Lights
To switch Lights ON and OFF
D. Power on/off
E. Fan speed 1- light frying/boiling
F. Fan speed 2- frying/wok cooking/heavy boiling
G. Fan speed 3- grilling, intensive frying and wok
cooking
A B C D E F G
CARE & MAINTENENCE
External surfaces are susceptible to scratches and
abrasions, so please follow the cleaning instructions
to ensure the best possible result is achieved without
damage.
CAUTION
Cleaning the hood
a solution of water and mild washing up liquid. Clean
stainless steel surfaces using non-abrasive cleaning
products that are specifically for use on stainless steel.
To ensure the best results also use an even pressure and
follow the grain of the stainless steel. Use of a soft cloth
reduces the risk of scratching. If the cloth is wet ensure
that a dry soft cloth is used to wipe down the surface
and apply stainless steel protector to reduce the risk of
any surface rust appearing.
products or products containing bleach.
protective grid.
damp cloth and mild washing up liquid.
cause grease deposits that could cause a fire.
Removing the metal grease filters
then pull it down and out.
NOTE. This product is fitted with a safety cutout device.
If the cooker hood is installed to close to the cooktop, flambe cooking, operating the cooktop without cooking utensils and
blocked filters may activate the safety cutout device. If the hood stops during operation, correct the faults and allow time
for the safety cutout device to reset, the cooker hood will then function correctly.
12
Fig. 19
unit. See Fig. 18 below.
Loading ...
Loading ...
Loading ...