Loading ...
Loading ...
Loading ...
5
3. CUSTOM HOOD PREPARATION (CONT’D)
To minimize the gap around the power pack, take actual width and depth measurements of power pack and add 1/16” to get D and E
measurements. Cut the hole in the bottom of the cabinet according to dimensions. See chart and illustration for details.
4. MOUNT CUSTOM HOOD INTERNAL FRAMEWORK
WARNING
!
The framework must be positively secured to wall studs or other wooden framework behind the drywall. Make
sure it is capable of supporting its own weight and the weight of the CPM1 or CPM2. Failure to do so may cause
personal injury or damage to countertop or cooktop.
The CPM1 and CPM2 power pack models are supported by the custom hood internal framework with screws provided in parts bag.
Since the CPM1 and CPM2 power pack models mounting holes are located in front
and rear sides (see illustration at right), plan to install wood frame at front and sides
for support.
5. REMOVE FILTERS
Remove tape on filters. Remove filters from power pack and set aside.
NOTE: It is recommended to start with the center one(s).
E
HD0367
D
POWER PACK
M
ODEL
WIDTH
CUTOUT
DIMENSIONS
DE
CPM1 30”
193⁄8”
28½”
CPM1 36”
193⁄8”
34½”
CPM2 36” 22
5
⁄8”34½”
CPM2 42” 22
5
⁄8”40½”
CPM2 48” 22
5
⁄8”46½”
HH0102A
HD0295
Loading ...
Loading ...
Loading ...