Loading ...
Loading ...
Loading ...
en Installation and connection
12
3.4 Sensors
The sensors adjust the programme
sequence and strength in the auto-
matic programmes depending on the
level and type of soiling.
The sensor has different sensitivity
settings that can be changed in the
basic settings.
→"Changing basic settings",
Page41
Sensor set-
ting
Description
SE:00 Optimum setting for
a mixed load and
heavily soiled table-
ware. Saves both en-
ergy and water.
SE:01 Adjusts the pro-
gramme strength for
effective removal of
food remnants even
with low soiling
levels. Energy and
water consumption
are adjusted accord-
ingly.
SE:02 Adjusts the pro-
gramme strength for
difficult conditions of
use, e.g. stubborn
dried-on food rem-
nants. Recommen-
ded setting when us-
ing organic or ecolo-
gical detergents con-
taining low levels of
active agents. En-
ergy and water con-
sumption are adjus-
ted accordingly.
3.5 Efficient Dry
The appliance door opens automatic-
ally during the drying phase. This en-
sures a particularly economical dry-
ing result.
For best drying results wait until the
end of programme before unloading
the tableware. The programme has
ended when the display shows
"00h:00m".
If automatic door opening is deactiv-
ated, energy consumption increases
and the drying phase is usually
shortened.
→"Overview of the basic settings",
Page38
If this additional function has been
selected, automatic door opening is
deactivated.
→"Additional functions", Page23
Installation and connection
4 Installation and con-
nection
Installation and connection
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
4.1 Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note:The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
Loading ...
Loading ...
Loading ...