Loading ...
Loading ...
Loading ...
8
Wet Sounds ZERO Series High-Output Coaxial Speakers Owner’s Manual
Installation Specications
Note: ZERO Series has a standard Deutsch connector compatible connection.
(PN: DT04-2P) PIN 1 (+) PIN 2 (-)
Tape the surrounding surface to prevent damaging the finish, and avoid
cutting outside the cut line to prevent improper fitment.
For speaker orientation, the mounting tabs indicate the top and bottom of the
speaker.
Pre-drill the screw locations to
prevent surface cracking.
Recommended:
1/8 drill bit
ZERO 5x7: Fasten with stainless
steel 5/32” x 1.25” Phillips screws.
ZERO 6x9: Place the XZ grille on the speaker. Fasten the speaker and grille using
the stainless steel 5/32” x 1.25” Phillips screws.
We recommend checking if the mounting surface is flat with a square or level.
Mounting to a curved surface will damage the product.
4
5
3
5
2
1
Connect the speakers to the amplifier or source unit using spade connectors for
each terminal.
7
Top
Bottom
mounting surfacemounting surface
1
2
Loading ...
Loading ...