Loading ...
Loading ...
Loading ...
23
The oven is not cooking evenly
If you are cooking a large item, be prepared to turn it round
during cooking.
If two shelves are used, check that space has been left for the
heat to circulate. When a baking sheet is put into the oven,
make sure it is placed centrally on the shelf.
Check that the door seal is not damaged.
A dish of water when placed on the shelf should be the
same depth all over. (For example, if it is deeper at the back,
then the back of the range should be raised up or the front
lowered.)
If the range is not level arrange for your supplier to level it for
you.
Oven not coming on
Is the power on?
If not there may be something wrong with the power supply.
Is the range supply on at the circuit breaker?
Have you set a cooking function?
Oven temperature getting hotter as the range gets older
If turning the knob down has not worked or only worked for a
short time then you may need a new thermostat. This should
be changed by a qualied service engineer.
The door is misaligned
The bottom hinge of either oven door can be adjusted to
alter the angle of the door (Fig. 7.1). Loosen the bottom
hinge xing screws and use the notch and a at bladed
screwdriver to move the position of the hinge to set the
hinge position (Fig. 7.2).
ArtNo.320-0006b -Mercury oven door hinge adjustment
ArtNo.320-0007 Oven door hinge adjustment 2
Fig. 7.1
Fig. 7.2
Eect of hinge adjustment – exaggerated for clarity
Centreline of hinge pin
Oven door omitted for clarity
Loading ...
Loading ...
Loading ...