Loading ...
Loading ...
Loading ...
DS-K1201 Fingerprint and Card Reader
v
� If smoke, odors or noise rise from the device, turn off the power at once and
unplug the power cable, and then please contact the service center.
� If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the device yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
� Do not drop the device or subject it to physical shock, and do not expose it to
high electromagnetism radiation. Avoid the equipment installation on vibrations
surface or places subject to shock (ignorance can cause equipment damage).
� Do not place the device in extremely hot (refer to the specification of the device
for the detailed operating temperature), cold, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
� The device cover for indoor use shall be kept from rain and moisture.
� Exposing the equipment to direct sun light, low ventilation or heat source such as
heater or radiator is forbidden (ignorance can cause fire danger).
� Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfunction however), and affecting the
endurance of sensor at the same time.
� Please use the provided glove when open up the device cover, avoid direct
contact with the device cover, because the acidic sweat of the fingers may erode
the surface coating of the device cover.
� Please use a soft and dry cloth when clean inside and outside surfaces of the
device cover, do not use alkaline detergents.
� Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device
and lead to additional costs.
� Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries
according to the instructions provided by the battery manufacturer.
� Biometric recognition products are not completely applicable to anti-spoofing
environments. If you require a higher security level, use multiple
authentication modes.
� Please take care of your card and report card loss in time when card is lost.
� If you require a higher security level, use multiple authentication modes.
� Multiple card types are supported. Please select an appropriate card type
according to the card performance and the usage scenarios.
0100001090812
Loading ...
Loading ...
Loading ...