Loading ...
Loading ...
Loading ...
Cleaning & Replacing the Shake-Out Bag
Note: Clean the shake-out bag out-doors when changing the HEPA dust bag.
Cleaning the Shake-Out Bag Used with the HEPA Dust Bag:
1. Remove the shake-out bag and hold the handle at the bottom of the bag shaking
vigorously over a garbage receptacle and preferably outdoors.
2. Inspect shake-out bag regularly for tears or damage. Replace shake out bag if
Damaged or torn.
Cleaning the HEPA Pre-Motor Filter
Important, Please Note: The HEPA pre-motor filter will stop most of the tiniest dust
particles and airborne allergens from re-entering the air you breathe. In fact it stops
99.97% of all particles as small as 0.3 microns- many times smaller than a human hair!
Because of this incredible filtration performance, the HEPA pre-motor filter will accumulate
many fine dust particles that are difficult to see. Be assured that the HEPA pre-motor filter
is doing the job. Clean the HEPA pre-motor filter after each use as described in this section
1. Remove the shake-out bag from the canister. The HEPA pre-motor filter bag is located
underneath the shake-out bag. To remove the HEPA pre- contents into a motor filter, lift the
form the sides of the HEPA filter.
2. Vigorously”TapClean” the HEPA pre-motor filter on a hard surface to remove any
residual dust that might still be on the HEPA pre-motor filter.
3. You can wash the HEPA pre-motor filter by running it under the tap and allowing the
water to run on the dirty side at least once a month or when suction appears to be
decreased.
Loading ...
Loading ...
Loading ...